Question about Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Hotpoint WF250-Loud banching when spinning

When the machine is in spin the drum is making a banging sound. I stopped the cycle and emptied the machine and finished the spin and it was fine when it was empty. Tried a small wash and the same happened.

Posted by on

  • owenzy Jun 07, 2008

    i have had a noisey machine since i bought it 2+ years ago...I assumed it was noisey due to the 1500 spin.

    Now the top has come off and there is dust on the floor around the front and rear...Any ideas and can it be repaired?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi I just opened the top of the machine and wow the cement block had fallen off...
the support bolts going through the block that attach to the drum have snapped from the plastic they are inserted to.
What a load of rubbish from Hotpoint..
now will they replace it..can i buy the part myself?
??

Posted on Jun 07, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Possible broken "spider"support on rear of basket best call serviceif unit is out of warranty be sure to ask for estimate first

Posted on May 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When spinning on highest spin make very loud noise like brick inside then heard loud bang and noise stopped washer carried on spinning


Hello that sounds like a broken spider that's blotted to the drum what hold the drum to the bearings if one is broken that will do that the banging is when it pop out on a spin it sounds like a brick hitting the back I would be very carefull as it can try and flip the machine if it catch the drum it's not bearings as you said it stopes and it was ok so it's the spider and most drums are sealed units so you can't do any thing ok hope this has helped you

Nov 13, 2015 | Washing Machines

1 Answer

Hotpoint aquarius wml760 noisey when spinning with stuff in but ok empty


more than likely the rear bearing has gone bad and when a load is applied the difference in weight distribution causes the knocking.

Jun 15, 2012 | Hotpoint Washing Machines

1 Answer

When spin cycle stops the agitator stops but the tub spins and makes a loud banging sound


it sounds as if one of your springs has broken or become detatched from the outside of the drum. open the top cover and have a look. ensure the power is switched off.
thanks iain

Apr 28, 2011 | Kenmore Washing Machines

1 Answer

Very Loud banging on washing machine spin cycle


Ah,,,,Sounds like drum bearings havee gone the circles iassume is oil from the bearing it will be very noisy on spinen and a lot of play on drum ..quite a big repair..hope you get on ok

Sep 30, 2009 | Washing Machines

2 Answers

How to replace drum bearing for hotpoint aquarius+ wf740


My machine is just over 3 years old and although there is no play in the rear drum bearing it is very noisey on spin.
It gets progessively loud the faster the spin speed.

Jun 18, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hotpoint wf250 drum wont spin


Well if you see the drum move in the wash cycle than the belt is still attached.Your door latch is the first thing to check.And the control board is the next and most likely problem.

May 24, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hotpoint Aquarius WF250 Loud banging when spinning


The hardest amount to balance is a load with just one item.Because you have nothing to counter balance the other side.So,first off,put in a normal load ,make sure your washer is level by using a level to assure it is, other wise if its not all the clothes will group in one spot where its not level ,than when time to spin you have a un balanced load.

May 21, 2008 | Washing Machines

1 Answer

Hotpoint WMA42 - Noise!!


appliance sounds like it has bearing failure.common on this machine.advise looking for a new machine.sorry

Dec 30, 2007 | Hotpoint Aquarius WMA42 Front Load Washer

Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...