Question about CD Players

1 Answer

Marantz cr2020 cd player

Hi, I have the above which I bought approx. 10 years ago. Everything has worked really well until recently, sometimes it will play CD's and other times it just says CD error, any ideas??
Thanks

Michelle

Posted by on

  • Anonymous Dec 31, 2008

    Yes, the problem showed up resaneally. I tryed to turn off the power and the machine went on for a short time. Whats next, I like the powergirl so much have connected her with a couple of B&W`s and they are going very good along...

    Is it a reading problem while using any CD`that are not in sale in the proper way?



    Quemark M

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have had this problem twice now in ten years, each time took it to get repaired at a marantz dealer and they replaced the laser. First time was about $150, second time they didn't charge me. No problems otherwise - which for an integrated item like this, where so many things can go wrong, is pretty good.

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cd-48 sometimes gives disc info but reads no disc when play is pressed???


Hi,
i found my dads Marantz CD-48 on the attic and had the same problem. Some CD`s the player was able to play instantly others not, getting the Error Message after trying to read the disc. My problem was solved after i opened it up and cleaned the linse of the player with a cotton swab.

Mar 10, 2014 | Marantz CD-48 CD Player

1 Answer

Hi _ I have a Marantz CD player a littl;e over 6 years old. Performed perfectly until today, when it started inserting brief gaps in the music, approx 1-2 seconds; at the same time the track / time...


laser cleaning cd's very rarely work. the only thing they are good for is if there is a build-up of dust on the lens. Sounds like you most likely need to have the laser replaced.

Feb 11, 2014 | Marantz CD5001 CD Player

1 Answer

We have Marantz PMD 325 CD players. Usually TOC REading comes up when you put a CD into the player. However sometimes we now get the following message "PMA Reading", What does this mean.


Hi Wendy CD-Rs and CD-RWs have a component that ordinary music CDs do not have -- an ...This additional track space includes the power memory area (PMA) and the ... which tells the CD player what part of the disc it is reading at any particular time. ...uncorrected error on a music CD only means a bit of fuzz or a skipping noise. GOOD LUCK !

Jan 05, 2014 | Marantz SA8260 CD Player

1 Answer

Hello, my Sharp Cd-sw200 no longer recognizes the cds that are in there and none of the 5 cd drawers will open. Everything else works fine. Unit is approx 3 years old and very gently used until 4 months...


Changers are the worse of the reliable units and Sharp is not among the best brands to get. The unit will need service by a Technician.
If none of the 5 drawers will not open how is it possible that the units works fine?

Dec 14, 2012 | CD Players

1 Answer

Marantz CD5003 CD Player pauses


Not may be! It is. Check and replace it.

Aug 10, 2012 | Marantz CD5003 CD Player

1 Answer

Hi. I recently bought a Sony CDP-CX355. Until a few days ago it was working fine. Suddenly, the player stopped reading the discs. It grabs a disc as if its going to play it, but just reads it, and then...


This happens when your laser is not able to read the data of the disc. Either u are using disc which the player cannot read or the disc is not readable. If your CD player is not reading the discs which it used to read earlier then CD player laser head has to be replaced.

Aug 14, 2010 | Sony CD Players

1 Answer

Remote not working on Marantz 63cd. Tried


check the back of your marantz player, some old marantz products have a buttom at the back saying system or intermal, if it is on the system side, the remote will never works.

May 06, 2010 | Marantz CD-67 SE CD Player

1 Answer

My Marantz CD63SE SPECIAL EDITION CD PLAYER won't read discs


Most likely, new optical (lazer) pick up required to solve this issue.

Nov 30, 2009 | Marantz CD Players

1 Answer

Discs not reading


first clean the laser lens,and if this not solve your problem change the motor disc spindle

Jul 13, 2009 | Onkyo DX-C340 CD Player

1 Answer

Cd tray mechanics


It can be repaired but in all of my years in consumer repair, I dread the CD/DVD tray alignments the worst.

There are many things involved in getting them to operate without fail. Using the mfgs documentation you can get them up and running but most of the time they failed because something is amiss to begin with. So you spend an hour getting everything setup and it will work once or twice but them fail. Only to find out that a location sensor is bad or a gear is missing a tooth....

Nov 21, 2007 | CD Players

Not finding what you are looking for?
CD Players Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top CD Players Experts

Dave Jukebox

Level 2 Expert

211 Answers

phil

Level 2 Expert

567 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a CD Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...