Question about Onkyo Audio Players & Recorders

1 Answer

Onkyo TX-SR575 I bought this unit at a flea market. Comes with everything including the manual except for the remote control. Manual is somewhat difficutl to understand. Stand by red light keeps blinking. When try to press the stand by button to power it on, the display screen comes on only for one second, then disapear. Do I really need a remote control to initially to activate it to turn it on and program it first? Or is it a dead unit? Any help please! THANKS! Judy

Posted by on

  • Anonymous Mar 20, 2014

    Remote control "VOLUME" up/down button activation does not blink on the remote or on the unit. All other buttons on the remote give a response blinking the "SENDING/LEARNED" LED on the remote and blinking the "STAND BY/RECEIVED" LED on the TX-SV727 unit. Any solution?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The unit is in protect mode. The outputs are fried in all likelyhood. This can be repaired. Figure on $5-$15 for parts plus the local labor rate for the total repair cost.
Dan

Posted on May 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you use an Onkyo RC-771M remote control to operate Onkyo receiver TX-SR502 ?


Unfortunately, the RC-771M remote doesn't control the TX-SR502. It will only work with these Onkyo models: TX-NR1008 and TX-NR808. The RC-567M is the one for the TX-SR502; replacement remotes that are exact replacements are still available from various places including Amazon.com .

Since the TX-SR502 was released in ~2004, that replacement remote probably won't control other devices that were released in 2004 or later. Onkyo changed its IR code programming before the TX-NR1008 was released in ~2010 and the RC-771M can't communicate with the older receiver. The manuals for the receivers listed above are still available from Onkyo on the product page under the Downloads tab.

I wish that I had better news for you.

Cindy Wells

Jan 31, 2016 | Onkyo TX-SR502 Receiver

Tip

Onkyo TX-SR605 Remote Codes


Download Onkyo TX-SR605 Remote Codes
4 Digit Onkyo Remote Codes

Models: RC-682M / TX-SR605 / TX-SA605 / TX-SA8560

6ccdda6.gif

Have you misplaced your Onkyo TX-SR605 Remote code list / Owners Manual?

Would you like a digital, searchable, pdf version of the Onkyo TX-SR605 Universal Remote Code List Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.
_________________________________________
Download Onkyo TX-SR605 Users Manual Here.

on Apr 20, 2010 | Onkyo TX-SR605 Receiver

2 Answers

Tx-sr575 7.1 - is there any use in connecting and old power amp and equalizer to this receiver? If so, how?


Ya mean like to hook up Bose 901's? Nevermind.

Utility is in the imagination of the dreamer.

http://www.retrevo.com/support/Onkyo-TX-SR575-Receivers-manual/id/2526bh749/t/2/

Any analog processor can occupy the Tape Out/In loop. However, it will only affect stereo analog sources and, once engaged to monitor, it will disable any digital audio source.

An external amp COULD be slaved off the tape Out (or the anticipated EQ Out, but it won't be volume-controlled by the Onkyo. You would need an AVR with at least Front L/R pre-outs.

Aug 12, 2011 | Onkyo TX-SR575 Receiver

1 Answer

Need a manual for onkyo rc 427s


I don't have a separate manual for the Onkyo RC-427S. However there are several pages on this remote in the TX-DS484 receiver manual.

See page 30 of the manual here: http://www.intl.onkyo.com/downloads/manuals/pdf/tx-ds484_manual_e.pdf .

I hope this helps.

Cindy Wells

Aug 04, 2011 | Onkyo RC-375DV Remote Control

1 Answer

I'm using HDMI through my Onkyo SR575 receiver, but I can't get the audio to come through


Through to where? The attached speakers or the TV?

Digital audio must be assigned to hear it on something other than the default input selection. I can't find a manual but I hope YOU have one. Many receivers also have a choice to pass (or not) audio through the HDMI going TO the TV. Sometimes it is exclusive, meaning audio to the TV and NOT to the speakers.

Jul 09, 2011 | Onkyo TX-SR575 Receiver

1 Answer

I have just tried to plug in a microphone on my TX-SR575 and now we can't get any sounds whatsoever.. PLEASE HELP!!!


Please tell us WHERE you attempted to get a mic to work on this unit. It might shed some light on what got blown up.

Mar 05, 2011 | Onkyo TX-SR575 Receiver

1 Answer

SR573... Does it support NTSC/PAL?.


There's no mention of either NTSC or PAL in any spec sheet.

This link leads to Onkyo and the rear view of the amp lacks the voltage selector.

http://www.onkyousa.com/model.cfm?m=TX-SR573&class=Receiver&p=s

The manual for the similar model SR575 says the North American model does not have the voltage selector. Too bad. Under the general specs for the variants of this family of receivers they list the following power specs. I have no idea where you have to go to buy one from the "Others" group.

Power Supply North American: AC 120 V, 60 Hz
European: AC 230 V, 50 Hz
Others: AC 120/220-240 V, 50/60 Hz
AC 220 V, 50/60 Hz

Some aliases for the SR575=
TX-SR505
TX-SR505E
TX-SR8550
TX-SR575

You could do what I did over 30 years ago. Join the Army, go overseas and buy one in the PX. Every HiFi product we bought in the PX in the 70's had the dual voltage feature.

Apr 07, 2009 | Onkyo TX-SR573 Receiver

2 Answers

Program Time Warner Remote RT-U62CP-1.17 to work ONKYO TX-SR575


i bot a new tv i don't have the book for the time warner remote so i don't know how to program it to work the tv it only works cable box
where can i find how to program remote that comes with time warner cable

Dec 26, 2008 | Onkyo TX-SR573 Receiver

1 Answer

Remote Control Not Communicating with TX-DS787


Hello, I am sorry about your issue. Your hook up should have nothing to do with the remote. You should get some functions like on/off, volume control. Thank you, Onkyo, USA

Apr 25, 2017 | Onkyo TX-DS787 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...