Question about HP iPAQ H5455 Pocket PC

1 Answer

Please Help me too thank you

I have a similar problem I am locked out of my PC because of the Biometric program... I don't know what to do..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 13,433 Answers

This will reset the pda into the original state, so you will loose all files and programs in memory, files in a storage card wont be effected.


Just hold down the calendar and today buttons, these are the two outer buttons on the lower left and lower right, then using a stylus press and hold for at least ten seconds the soft reset button this is located on the lower right edge of the unit. The screen should reset and the iPAQ will boot up again.

Posted on May 23, 2008

  • Ekse Jun 01, 2008

    Hello,



    This thread has gone 14 days or more without a response. Please close the thread with a “FixYa” or “Helpful” rating.



    If the issue is not resolved, please post back with latest developments, what steps you took, etc. and I will assist you further as best I can.



    Thank you.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Reload operating system in symbol mc50


As you know a cold boot will not help you here.

You need to access the IPL loader.

Press and hold the Power button and both Scan buttons, then press the Reset button. When the mobile computer resets into IPL, release the Power button and Scan buttons.

If you need any more help then please do not hesitate to contact us:-

helpdesk@biastechnology.com or TEL 01202 620955
http://www.biastechnology.com/




May 03, 2009 | Symbol MC50 Pocket PC

2 Answers

Pin code request when turning phone on


hey everyone.

i have read a couple of threads i have found on the internet and i have tested this on my samsung sgh-c450 locked to telstra. no computer is needed (or cable). i hope this helps anyone with a samsung. WARNING: ALL CONTACTS AND OTHER SETTINGS MAY BE LOST DURING THIS PROCESS!!!

Method:
Before you start, make sure the battery is charged and all security codes or PIN codes or watever are disabled so we dont have any code prompts interfering with this method.

1. Turn off the mobile phone.
2. Insert a "Non-accepted" SIM card (sim card that wont work) half way in so that when you turn on the phone, it still says "Insert SIM".
3. Turn on the phone.
4. Aant. Harry----- punt 4 is vervallen ivm met het verwijderen van de emei-code.
5. Once reset has completed, the phone will still say "Insert SIM". This is where you need to push the sim card all the way in. You can use a paperclip or a tiny object to push it in if you have difficulty. IT IS IMPORTANT THAT THE PHONE REMAINS ON AT THIS STAGE (TRY NOT TO LET BATTERY FALL OUT) IF BATTERY FALLS OUT, DO NOT PANIC, JUST START FROM STEP 2 AGAIN.
6. Enter the following code and wait patiently for phone to reset:

*2767*3855#

7. After reset is completed, SIM should work and also the reception. Don't get excited, its not unlocked yet.
8. Now we want to make it permanent. First check what locks need to be deactivated with the following code:

*#7465625#



Aantekening Harry: Om de codes in te voeren moet je een keer op de rode toets (naast C) drukken, zodat je in het beginscherm komt. Dan kun je codes intoetsen. Dus geen codes intoetsen als je in het keuzemenu zit.
===============================================================
------------------------------------------------------------------------
a)
If Network Lock is "Active", put in the following code:

*7465625*638*00000000*00000000#
Message should be "Network Lock has been personalised" or similar.
Then:

#7465625*638*00000000#
Message should be "Network Lock deactivated" or similar.

------------------------------------------------------------------------
b)
If Subset Lock is "Active", put in the following code:

*7465625*782*00000000*00000000#
Message should be "Subset Lock has been personalised" or similar.
Then:

#7465625*782*00000000#
Message should be "Subset Lock deactivated" or similar.

------------------------------------------------------------------------
c)
If SP Lock is "Active", put in the following code:

*7465625*77*00000000*00000000#
Message should be "SP Lock has been personalised" or similar.
Then:

#7465625*77*00000000#
Message should be "SP Lock deactivated" or similar.

------------------------------------------------------------------------
d)
If CP Lock is "Active", put in the following code:

*7465625*27*00000000*00000000#
Message should be "CP Lock has been personalised" or similar.
Then:

#7465625*27*00000000#
Message should be "CP Lock deactivated" or similar.

------------------------------------------------------------------------
e)
If SIM Lock is "Active", put in the following code:

*7465625*746*00000000*00000000#
Message should be "SIM Lock has been personalised" or similar.
Then:

#7465625*746*00000000#
Message should be "SIM Lock deactivated" or similar.

------------------------------------------------------------------------

"a)" is the common one that usually is the only one need to be done but if other locks are active, i think its best to disable them now while you have the chance.

Now you have unlocked your phone!

Tested on:
SGH-C450

Please test this!

Thank You.

Sep 16, 2008 | Samsung Blackjack SGH-I607 Smartphone

2 Answers

Random shutdown and hard reset


I had a similar problem and it turned out that there was a backup program called ´Sprite´ that was loading an image file of the system after every hour of use, erasing all changes to the configuration and saved data.

The folder of the ´Sprite´ program has a text file with the configuration data. I opened the text file and set autoexec. and similar options to ´false´ and saved the file again. After that, the problem had disappeared.

Regards,

Joep

Jul 31, 2008 | HP iPAQ h6315/h6365 Pocket PC

3 Answers

Dell Axim X50v won't turn on after 6 months of no use


Perform a hard reset.

1. Hold the reset button on the back.
2. Hold the Power button down.
3. Release the reset button.
4. Release the Power button.
5. Press the Contacts button when prompted.

Hope this helps!
Ken Akiyama

Jul 03, 2008 | Dell Axim X50 Pocket PC

2 Answers

Motorola q problems


Hello Dee, I am Ken. I know this can be very frustrating. My recommendation is to go to Start, Settings, then "Remove Programs". Remove any programs on there and then try re-intalling the ones you wish to keep. Your Q is a computer, so it is like fixing program problems on a windows PC. If that does not work, please let me know what program you are trying to install and I will try it on My Moto Q. Please let me know if this helps.
Good Luck,

May 20, 2008 | Motorola Mobility Moto Q

2 Answers

Biometric fingerprint


In my iPAQ 2790 , I found an icon in SETTING ( HP Protect-Tools) that help to configure the security in your devise.

Mar 22, 2008 | HP iPAQ HX2790 Pocket PC

3 Answers

I dont have a pc suit for my o2 xda pocket pc


There's no need to get O2 XDA II Mini CD... if you want to get connected between your O2 and PC just download this program Microsoft ActiveSync 4.5. That all.

Mar 20, 2008 | O2 Xda IIs Pocket PC

3 Answers

Unlocking imei number on imate jam


is telstra is a network provider if so the IMEI is your phone ID no. so you can't change it and there is no lock from your phone can do this ,  try to get help from the network provider

Nov 23, 2007 | i-mate JAM Pocket PC

1 Answer

Some programs not running


Take a look at this similar post - http://www.fixya.com/problems-solutions/t115221,p477250/HP-iPAQ-hx4700-Pocket-PC.aspx Let us know if you resolved your problem Good luck

Jun 27, 2006 | HP iPAQ HX4700 Pocket PC

Not finding what you are looking for?
HP iPAQ H5455 Pocket PC Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PDAs Experts

David Payne
David Payne

Level 3 Expert

13437 Answers

ka4iup
ka4iup

Level 3 Expert

3944 Answers

Bob S

Level 1 Expert

15 Answers

Are you a HP PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...