Question about Panasonic Televison & Video

1 Answer

We have basic cable that goes upto 60 or so channels, but one of our household televisions only shows upto channels 13

Posted by on

  • priyabains May 21, 2008

    just a month ago it had all the channels though

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

First make sure how many chanels the TV itself has.. Some TV's (usually the smaller 14" old CRT's) dont hold that many chanels..

Posted on May 21, 2008

  • Swilin Sampson
    Swilin Sampson May 21, 2008

    Try an autoscan again, and a manual scan. If that doesnt work, it could be that the cable signal is weak. You will probably want to call the cable guy to take a look.

  • Swilin Sampson
    Swilin Sampson Jun 01, 2008

    Hello,





    This thread has gone 7 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The tv is connected to Dish Network as TV2. I accidentally changed the channel & now I can't get it back to channel 90 - it only goes to 13 now. How do I fix this?


In the menu screen, you must find antenna connections. For example " TV Air "(over the air channels 2 through 13) or cable TV. You must tell the menu to select cable TV (with the original remote). This will allow you access to channel 90. Thanks for asking and show a few hands of support.

Nov 07, 2010 | Orion STV2763 27" TV

1 Answer

Hi Someone gave me this old Sanyo TV Model # 31C4760, When I connect it with my cable it catches only basic (13 channels) instead of 60 channels. How should I see all the channels? What should I do?


If it is very old (with rotory/manual channel changer), you are out of luck unless you get a cable box from your cable company - this will let you set your TV on channel 3 or 4 and the cable box will find all stations for you. The cable box goes between your wall cable and your TV.

It your TV has an electronic tuner with a remote, try going into the setup menu and select signal source as CATV instead of antenna.

Please rate me.

Nov 20, 2009 | Televison & Video

1 Answer

Can't see my cable channels!


you have to scan threw the tv in the menu to get the channels to show up

Jun 04, 2009 | Toshiba MD13P1 13 in. TV/DVD Combo

1 Answer

Only goes up to Channel 19.


Go into the TV's setup screen and make sure its tuning mode is set for "cable" (may say "CATV"). I'm not familiar with this set so I don't know exactly what the screen will say, but there should be some reference to channel setup, TV setup, tuning band, etc. It's probably set on "AIR" now.

Normally, when set for off-air reception, the set works properly for channels 2 through 13, and 14 up don't tune properly. Since you're getting channels up to 19, there may in fact be some kind of tuner problem. If the TV is already set for cable tuning, you may have found why the former owner was freecycling it. But check that tuning mode.

Apr 06, 2009 | Apex Digital GT2015DV 20 in. TV/DVD Combo

1 Answer

Won't show cable channels


Try to find a spot in the setup menu that says Antenna in there you may find the spot that says cable etc
Hope this helps
Trap

Jan 25, 2009 | Proview PA-32JK1A 32 in. LCD Television

1 Answer

Only getting some channels to come in...


Check your latest phone bill and see if you have a basic extended package. If you dont you may have been downgraded to only get basic cable which is 2-13.

The auto program adds every channel that the television can detect.

Jan 04, 2009 | Sanyo DS25390 TV

1 Answer

Cannot watch channels past 13


Your tuner settings must be set on broadcast instead of cable. Below channel 13, they use the same frequencies so it doesn't matter. Find the tuner settings page in the menus and change the cable/air setting.

Jan 06, 2008 | Westinghouse LTV-40w1 HDC 40.02 in. LCD...

1 Answer

Cannot program cable to tv


if your are using a cable box,all of your channels will be control only on the cable box.so, what you are going to do is use the remote control of the cable box.

Nov 07, 2007 | Panasonic PV-C1320 13 in. TV/VCR Combo

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...