Question about Hitachi 53UDX10B 53" Rear Projection Television
I have a 50 inch hitachi ultravision projection screen tv model # 50ux53k anyway the picture was jumping at first for awhile and a few months after that started happening i took off the back and found that if i put pressure on the circuit board it would stop jumping.so i wedged a plastic rod to keep the pressure and it worked fine for a few months and then the picture began to squish to the center (top to bottom) so i then took the back off again to find that the plastic rod fell down so i replaced it and it work for a week or so. then the picture went blank no picture or sound and the power button is on. can someone help. I have a 2001 hitachi ultravision 53udx10b, it powers up, but the screen is blank. Please help me...
A GECKO LIZARD GOT IN THE CIRCUIT BOARD AND CREATED A SHORT IN THE POWER SECTION OF THE TV AND WHEN OPENED THE TWO POWER CAPACITORS EVEN WHEN DISCONECTED STILL HAD POWER? THEY WERE DISCHARGED BUT STILL THE TV WON'T ON,THE POWER LED COMES ON FOR A FRACTION OF A SECOND AND THEN OUTS OF THE RED PROBLEM LED IN THE CIRCUIT BOARD IS ON ALSO ALONG WITH OTHER GREEN LEDS EXCEPT FOR THE ONE THAT WRITES 120V BELOW THE POWER SECTION
Posted on Nov 27, 2008
An expert who has achieved level 3 by getting 1000 points
Check the solder around the area of the vertical IC. solder is either cracked or else cold. Cold solder appears as dull. Resolder anything that isnt shiny.
Posted on May 21, 2008
SOURCE: I have a 50 inch hitachi ultravision that has no picture or sound but power light is on
you have lookse connection on the video convergance amp ic
KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:
http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
Posted on Dec 05, 2007
SOURCE: problems with my 50 inch hitachi ultravision projection screen tv
if the power button is blicking red then most likely ur lamp needs to be replaced. they dont come cheap but its an easy fix ...try ebay for the part ...and make sure u get the correct seze and watt for that specific tv ....on a side note...if u replace the bulb yourself....wear latex gloves and DO NOT touch the bulb. the oils on your skin will magnify the light and can cause that bulb to explode or pop and then u will be right back at squareone
Posted on Sep 20, 2010
Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!
Posted on Jan 02, 2017
Apr 25, 2012 | Hitachi UltraVision CineForm 55VG825 55"...
Oct 26, 2007 | Sony KP-46WT500 46" Rear Projection...
Jun 01, 2011 | Hitachi 53UDX10B 53" Rear Projection...
Apr 15, 2009 | Hitachi UltraVision CineForm 55VG825 55"...
Apr 12, 2009 | Hitachi 50UX57B 50" Rear Projection...
Nov 27, 2008 | Hitachi 50UX57B 50" Rear Projection...
Apr 16, 2008 | Hitachi 43UWX10B 43" Rear Projection...
Jan 03, 2008 | Televison & Video
Nov 07, 2007 | Hitachi UltraVision CineForm 55VG825 55"...
Nov 04, 2007 | Hitachi UltraVision CineForm 55VG825 55"...
716 people viewed this question
Usually answered in minutes!
yes same problem for me too. someone said there may be some capcitors bad . I need some good pics of what components on A53 circuit board fail to cause this.
×