Question about Whirlpool Washing Machines
If it,s a belt drive whirpool it's at least 22 yrs old ..if you never done one it can be tricky..1st remove back ..remove brace on rear and the other 2 from bottom remove the 1 bolt in transmission that has a spacer lossen the other 2 but DO NOT REMOVE.belt will need to be worked up throyugh where the spacer was removed and between where clutch spring is ..woops!! remove springpush up clutch bracket work belt over pin ..ck parts bag there are usually instructions and picture if the part is a whirpool 95405 belt hope this helps some
Posted on May 21, 2008
Tips for a great answer:
Jul 15, 2016 | Washing Machines
Apr 24, 2014 | Whirlpool Washing Machines
Jul 03, 2012 | Whirlpool Cabrio WTW6600SBT Top Load...
Dec 01, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Oct 08, 2009 | Kenmore Washing Machines
May 27, 2009 | Kenmore 22642 Top Load Washer
May 06, 2009 | Kenmore Washing Machines
Jan 08, 2009 | Washing Machines
May 26, 2008 | Whirlpool LTE6234D Top Load Stacked...
74 people viewed this question
Usually answered in minutes!