Question about Miele Advanta G2170SCSF Dishwasher

2 Answers

Miele Dishwasher G2170 scvi type hg03 dishwasher problem

Hi...I purchased this dishwasher a few years ago when I re-modeled my kitchen....it only has a one year warranty which is crazy considering the price of the dishwasher....anyway, the washer has been shutting down in the middle of it's cycle...an alarm goes off and the intake drain red light appears....I have spoken with customer service and they had mentioned that it could be a water level indicator issue or a watewr pressure issue?...nothing has changed in my house as it relates to water pressure...do you have any suggestions or any kind of remedy for this?

Thanks,

Artjohn@hotmail.com

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Remove and check the "non-return valve" and make sure it's clean. It snaps out and in easily. See page 47 of the manual for this dishwasher.

Posted on Feb 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

The control electric is bad.Sorry !

Posted on May 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Miele dishwasher door not working properly


Try contacting Miele with the model & serial number of your appliance they will send you out a new spring.
they are in scoresby from memory fern tree gully rd.

Mar 29, 2014 | Miele Dishwashers

1 Answer

Mains RCD blows after a few minutes of operation


You have a short inside the control unit. When it opens the power protection disengages the unit. It is a warning to get it replaced or face the possibility of a house fire.

Feb 26, 2014 | Miele G 1182 SCVi 24 in Builtin Dishwasher

1 Answer

Miele G863 SCVi All lights blink at the end and it doesn't dry


Check the web for,
2011-11-25_043923_g600__800_miele_service_manual.pdf

I found that PDF while working on fixing my Miele dishwasher and found it more helpful then most advice on the web.

Dec 30, 2012 | Miele Dishwashers

1 Answer

F78 error - alarm went off dishwasher stopped


hi
after dishwasher take water the red light start to flash and fault f78 is show on the display ( let me now if i am right )
the f78 is the electronic board on the main pump or pump itself is busted

Oct 14, 2012 | Miele G 2872 SCVi 22 in Builtin Dishwasher

1 Answer

Miele dishwasher will not drain (G 2270 SCVI)


you need to replace the non return valve.

May 27, 2012 | Miele Dishwashers

1 Answer

Miele Icognito G683 SCVI Plus. Residual water seems to be standing under the base guard and lots of moisture remains in the dishwasher?


Hi,
Many dishwashers intentionally leave a bit of water in them to keep the seals from drying out...
if there is more there now then ther used to be then check this out...


Dishwasher Problems - Water will not drain out

heatman101

Jan 21, 2011 | Miele 24 in. Incognito G863 SCVi Built-In...

1 Answer

Miele Advanta G2170 working fine 2 yrs, suddenly starts popping breakers and won't run (on any outlet) Electrical system in home is about 3 yrs old only.


Hi dear.If the washer is tripping circuit breaker,as long as you plug in,there is a Interference filter capacitor inside of the machine.Main power gets connect there first.It should be faulty & needs to be replaced.I hope that helps Thanks.

Aug 31, 2010 | Miele 24 in. Incognito G843SCVi Built-In...

1 Answer

Fault 11 - inlet or outlet blockage


THIS TYPE OF M/C PERMIT WATER TO FILL IN LONG TIME IF THE PRESSUR IS LOW
I THINK AFTER ABOUT 3 MINUIT YOU CAN OPEN THE DOOR AND CHECK OF LEVEL OF WATER TO ASSURE IS LEVEL OF WATER IS SUFFISUNT OR NOT

Jun 14, 2009 | Miele Incognito G658 SCVi Built-in...

1 Answer

Miele Dishwasher G2170 3 year old


On the display panel of the washing machine there are a few screws on the side. Remove that panel and check for power at the computer and sensor. Also make sure that when it is one and calling for water that it is getting everything everywhere

Feb 14, 2009 | Miele Advanta G2170SCSF Dishwasher

Not finding what you are looking for?
Dishwashers Logo

962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

icatci

Level 2 Expert

91 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Miele Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...