Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Fav6800 outer tub bearings

I do not understand what you mean by 6207-2rs bearings that you got on ebay. I have the machine apart and see the problem and would like to get these bearings. A new tub is $390.00 gasp. Thx Deb

Posted by on

1 Answer

If you are looking for these bearing 6207-2RS, they are a SKF bearing you can get them at Motion Ind. or any bearing store.

Posted on Jun 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replace the motor control becouse the O L sing was lid and the problem persist what other solution do I have?? thanks for your help


There are 2 codes which you may be mis-interpreting.

OL
and
DL

DL is a door latch/lock error
OL is a different beast....

OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.

CLICK HERE


Thanks for using FixYa

Mar 04, 2011 | Whirlpool WTW6400SW Top Load Washer

1 Answer

Kenmore washer OASIS errror code OL


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 22, 2010 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore washer oasis mod #110.27062601 is displaying a oL code but there is hardly anything in there, it even does it when it's empty. Any thoughts?


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 07, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

OL code. I have removed most of the items, but it


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Dec 06, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore Elite 110 does not spin/agitate/drain


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 30, 2009 | Kenmore Elite 20972

1 Answer

Won't spin


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 04, 2009 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

I get a message "oL" & the clothes are not spinning


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Feb 15, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

I am getting an over load code on my kenmore washing machine.


OL error means the Motor Controller has sensed an Overload.

The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.

If it were a problem with the tub floating up, the unit would spin instead of nutate.

Bearing failure in this machine is very common.

I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.

The new outer tub with bearing W10128830 cost approximately $197 dollars.

If you can get access to the shaft it may be an Emory cloth will help smooth things down so that you no longer get the OL code.

This is an ambitious do-it-yourself project... as most appliance repairmen don't understand how this machine operates.




http://media.fotki.com/1_p,srrtbrrfbdbqgkkxgtqsskgwtqkq,vi/bqkfstqqfxrqqbkwgqdxbwsqrwrtq/1/1303472/5961857/image828956817962821589img-or.jpg




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Feb 10, 2009 | Kenmore Washing Machines

1 Answer

Noise while spinning


The bearings are going out. Im having the same problem right now. The cost to fix is over $900. Needs a new outer tub and clutch assembly.

Jun 19, 2008 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Drum Bearing Replacement


With a plastic tub (outer drum as you describe it) removal of the old bearings can deform or bruise out the plastic housing a little - you will need to check that the new bearings will be really good fit. You may need to use a retaining compound if not, to ensure that the outer journals of the bearings don't creeping round in the plastic housing and wear it looser.
I did my Hoover Electron 800 bearings (metal tub). As i recall it was fairly straightforward - needed a gasket for the tub backplate on that.
Unbolted tub backplate from tub and withdrew it through rear of chassis along with drum/drum-shaft/bearings assembly, removed pulley, tapped shaft through bearings with softfaced mallet (or hammer & wood), drifted bearings out gently, working evenly around circumference.
For plastic tub some kind of suitable extractor may reduce chances of deforming bearing housing during bearing removal, compared to drifting them out. If it'd serve to ease the new ones in too then that'd be even better.
Don't forget to check/clean the water level pressure sensor path while you're at it - stave off any problems in that area for a while while you have the machine apart. ;o)

Dec 29, 2007 | Hoover AL130 Front Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...