Question about Office Equipment & Supplies

1 Answer

Continuing to get an error message (E100) what is it and how do i fix it? It is a canon 6550

Posted by on

  • faris ahmed khan May 11, 2013

    it is a conon mf4570dn

  • faris ahmed khan May 11, 2013

    i am reciving error E100-0001 how can i fixed

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

This is from a canon service manual -
E100
Main Cause The BD PCB is faulty. The laser unit is faulty. The laser driver PCB is
faulty. The wiring is faulty (short circuit, open circuit). The DC controller
PCB is faulty.
Mode of
Detection
0001 In 100 msec after the laser drive signal has been generated, the BD
signal is not detected 50 times or more within 40 msecs.
0002 While the laser is on, the BD signal cycle is found to be outside a
specific range 10 times or more.

I'd be inclined to check the laser out first, starting with checking the cable connections.

Posted on May 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please My printer is canon 1023if. Now my printer has error E100. How solve this error. If can explaim by video file.


Please see this explanation. It's for a Image Runner 1022A which should use the same error codes.

Thread E100 error code in Canon IR1022A

Please unplug the unit before trying to fix anything in the laser unit, it may damage your eyesight.

Jul 18, 2016 | Canon Office Equipment & Supplies

1 Answer

How can I fix the error e100 of canon mf3010?


Go To Below official Canon Printer Page For Your problem, PIXMA Printer Error Codes and Error Messages Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For Canon Printer Support

May 05, 2014 | Canon Office Equipment & Supplies

3 Answers

Mf4410 error code e100-0001


Code error e100-0001 canon 4430
Was This Helpful?

Sep 17, 2012 | Canon I-Sensys Mf4410 All-In-One Laser...

1 Answer

CANON IMAGERUNNER 2010F HAS A MESSAGE ERROR THAT SAYS E100


The E100 error code has to do with the laser. But in this case, it may be just that the drum ahs to be replaced. How long has it been since it was replaced? They are cheap and easy to put in.

Jul 08, 2011 | Canon imageRUNNER 2010F Copier

2 Answers

Canon D340 error


Check that all the doors are shut. If that does work unplug the printer and the E100 error code should stop.

Aug 22, 2009 | Canon imageCLASS D320 Digital Copier

1 Answer

Error code e100 on canon laser fax L100


E100 means that you have laser trouble, probably laser pcb is bad. Replace it.
But also check the laser shutter.

Jan 30, 2009 | Canon FAX-L1000 Plain Paper Laser

2 Answers

Error E100


The most common cause for E100 is the drum unit. At the rear of the drum unit should be a small peg pointing into the machine. This gets broken off. It's purpose is to opperate a laser cut off shield when the drum is removed so to prevent laser exposure. If peg is missing laser will not be detected by the system and give E100. Can be repaired or will require a new drum if it has done more than 40 to 60K copies.

Dec 31, 2008 | Canon PC-1060 Black and White Copier

5 Answers

Canon IR 2000


Canon IR 2000

System Error E100

Feb 27, 2007 | Canon imageRUNNER 2000 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...