Can I restore deleted data from my barcode scanner

Scanner Reset: To initialize the scanner's memory, turn off the scanner. Then press 2, 9, and Hold while turning it on. Important! This deletes all preprogrammed data. You cannot restore preprogrammed data that has been deleted.

Get yourself the user manual:

https://www.honeywellaidc.com/CatalogDocuments/4600g_User%20Guides/4600g%204600r%204800i%20Users%20Guide%20-%20la-es.pdf


Go to Chapter 5 Data Formatting,might have what you need.

Here is the link to the page in the manual to do a hard reset. Warning, this erases all data from the unit be VERY careful as to how you proceed as you will have to restore all the functionality back to the unit. Wish I had a better answer.

http://www.manualslib.com/manual/102695/Metrologic-Sp5700-Series.html?page=18

go to samsung web page and write your printer model in the little window then download the newest drivers from the download page, you will need 1. driver for the printer, 2. driver for the scanner, 3. driver for the fax and last samsung Dr. Printer

Hi,

You can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction.
NOTE: This will erase all the datas on the computer.

Thanks and regards,
Anil.B.R

Barcode scanners would usually have an error if the wrong figures were keyed into the data area. Clear the wrong figures to restore to the dsiplay screen area. A barcode scanner that was not perform with data backup during a privious usaged would experince an error when attempting to continue data storage. An error simply is restorable with powerign off and restrarting the entire system.

Hi, Please - Check the deleted on your recycle bin ( have it restored) - If you could't find in recycle bin folder just use your restore system. Restore you computer to the date / time before it deleted. In idle screen click start> help & support> system restore and key the date/time correctly to get back your driver . Note you should be carefully to use restore system ( you suggest to back up all data at separate folder unless they will disappears permanently before you proceed the restore task).
Regards,
Jay

you can easily return your computer's earlier stage goto start>programs >accessories >system tools>system restore. click on" restore my computer to an earlier time" click "next" select a restore point(click on a bold date) . click "next". on the other window click next system will be restore to earlier time
(do not press and click on any keys during the system restoration)
it doesn't delete your saved data .

Did you ever get it to transmit the barcodes?
I'm having very much the same problem. Got the error 3 message first, then was told to delete the add on in manage add ons. Now i get an error 2.

you can download the original software from Samsung's web page here.

be sure to select the correct Operating System (XP or Vista) at the end of the page