- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The part numbers are shown to be completely different for each dryer, the hot surface ignitor is standard between both, in addition to the burners being different, there may also be a difference in the BTU rating of the orifice. It's really advisable to use the correct parts as per application of the parts breakdown. Pleazer Appliance...
If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat.
check outthis electric no heat tip...
Two areas that might squeak in this dryer are the tension pulley next to the motor and the drum support rollers mounted to the interior rear.
The manual below will cover disassembly of your machine to get inside in page 5-1 and 5-2. Other areas of the manual may or may not apply to your machine. Turn off power and gas before opening dryer case. Draw a picture of the belt travel around the pulleys before removing it. Good Luck.