Question about BenQ PB6100 Multimedia Projector

3 Answers

It just shows a blank white screen when I turn it on

It just projects a blank white screen when switched on, and also it becomes unresponsive to the buttons. It doesn't show the usual blue screen

.

Posted by on

  • 3 more comments 
  • beans88 May 20, 2008

    Thank you for the quick reply, Marrie! Where can I purchase the part and is it possible to install it myself?

  • gerlad Jun 16, 2008

    yes, I have the same problem, just wondering what the fix is or do i have to buy a new mother-board for it?

  • mhz2100 Jun 24, 2008

    I have the same problem. Could you please advise where can I find a dealer for this part in USA and/or China? Thanks!

  • Anonymous Oct 15, 2008

    Marrie, I am looking for a mainboard for a PB6200, but BenQ will not help me. Please let me know where I can find a dealer in the USA for my board 48.J8601.S03

    Thank you.


  • FEDERICO713 Jan 22, 2009

    HI IM FROM ARGENTINA AND IM LOOKING FOR 48.J861.S03-1 PART CAND YOU TELL ME WERE TO BUY , IF IS IN USA IS NO PROBLEM , BECAUSE Y BUY WITH CREDIT CARD ,, THANKS

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 563 Answers

Hi beans88

This is unfortunately a faulty Mainboard that will either have to be repaired or replaced.

The Part Number of this board is : 55.J8601.001 and if you decide to rather replace than repair it , you could expect to pay in the region of $125 for this part.

Thanks for using Fixya and good luck.

Posted on May 20, 2008

  • Marnus Jacobs
    Marnus Jacobs May 20, 2008

    Hi there



    Please supply me with the country you are in so that I can find you a dealer on these please.



    This part is extremely easy to replace , I'll guide you once you're ready to do the replacement.



    But let's take it step by step.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Hello,

I been looking for 55.J8601.001 main board and I can't seem to find it. So far I tried Benq.com and some other repair shop that I still need to hear back from. If you know where I can get that part could you tell me? Thanks.

Posted on Nov 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Using a Dell projector, is there a way to get it to project white without any inputs, versus the standard blank blue screen? It goes white when searching for inputs, but switches back within seconds when...


Since you did not provide the make and model, you will have to pull out the manual and check the settings. It may provide you with a setting change for the background color. Perhaps you can connect it to a computer, open an new blank document and project the blank image to get your white light.

Mar 28, 2015 | Dell Multimedia Projectors

1 Answer

Haze


Rather hard to properly diagnose this one off such a short description, but...

1/ Bulb OK, not over hours or otherwise damaged?
2/ Is it constant for all images, just a general coloured haze, not a strange "shadow", "ghost" or "fringe" that alters depending on what you display?
3/ Lens nice and clean?
4/ Surface you're projecting it onto also clean and at least nominally white?
5/ Input cables all fine at both ends and work correctly with other output devices (TV and/or computer monitor)?
6/ Haze still in place with different cables and input devices?
7/ Does the projector regularly show the same static image for extended periods?

The VT460s were buggers for suffering from internal LCD and filter glass issues if allowed to overheat, and with image burn-in, especially if fitted with unusual lenses (e.g. extreme short-throw); I've had to do internal cut-and-swap surgery on a few of them before, with donor image elements from projectors that died due to other problems. I can't say the one VT470 has shown any sign of similar, but the two VT480s are worse if anything. So it's entirely possible that we just got the one good VT470 out of the whole production run. As intimated by the above, it could be anything out of a failing bulb, dirty lens (or internal image element) glass, image burn-in, LCD/filter damage from overheating (and mind that being turned on showing a "blank" screen for ages can cause a similar effect, as all of the bulb's 200 watts of light energy is then being completely absorbed by three thumbnail-sized pieces of liquid crystal... the bulb doesn't turn off unless the projector is shut down completely!), problems with internal circuitry, dodgy cables, unsuitable projection surfaces, or problems with the devices feeding images to it. It really is a minefield until it can be narrowed down.

May 11, 2012 | NEC VT470 Multimedia Projector

1 Answer

Hi there, my dell projector 1800mp is not projecting an image on screen and it only black lines across. what should I do to fix it?.


After turning on the projector, press "+" and "-" buttons on the control panel

simultaneously for 3 seconds and release the buttons when screen goes blank.

2 Press "+" and "-" buttons again to exit the diagnostic mode.

3While in Self-diagnostic mode, the screen will run a seven-color-cycle test as

following:

Red--> Green--> Blue--> White--> Watchet Blue--> Dark Green--> Yellow.

Ensure that the colors of the test pattern are correct. Contact Dell if the colors are
not displayed correctly.

Mar 02, 2011 | InFocus LP 250 Multimedia Projector

1 Answer

It doesn't show red color. i tried to do factory reset. but still problem.


1.After turning on the projector, press "+" and "-" buttons on the control panel
simultaneously for 3 seconds and release the buttons when screen goes blank.

2 Press "+" and "-" buttons again to exit the diagnostic mode.

3 While in Self-diagnostic mode, the screen will run a seven-color-cycle test as
following:
Red--> Green--> Blue--> White--> Watchet Blue--> Dark Green--> Yellow.

Ensure that the colors of the test pattern are correct.

Contact Dell if the colors are not displayed correctly.

Mar 01, 2011 | Dell 2400MP DLP Projector

2 Answers

Lcd projector DLP technology circuit diagram


Here I Show some pictures for your understanding of DLP and LCD technology and what is basic deference in betwen




good_help_13.jpggood_help_14.jpggood_help_15.jpggood_help_16.jpg

Feb 09, 2011 | Multimedia Projectors

1 Answer

My projector is showing multiple white dots, looks like lots of small stars all over the screen when projected to screens. is this mean I need to replace the lamp? TDP-XP1 model.


The link to the article explains the the cause of the white syndrome none of the previous internet experts have a correct solution. I have the same problem the link to the article attached is for a Mitsubishi projector but all the chips are the same. http://www.fixyourdlp.com/2012/04/26/solve-the-mitsubishi-white-dot-problem-for-under-200/

Oct 19, 2010 | Toshiba TDP-SP1 DLP Projector

1 Answer

Half inch crystal/ solid white vertical line on screen


Adjust the horizontal in the menu then try the overscan adjustment. If the image does not look dim you do not need a lamp.

Jun 04, 2010 | InFocus IN72 Multimedia Projector

1 Answer

InFocus Screenplay 4805 to PS3 Playstation 3 - Blank screen


Try pressing the "auto image" button on the projector itself. This usually will correct the sync problem.

Feb 28, 2009 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Unresponsive projecter


You need to replace the logic board.

Aug 05, 2008 | HP VP6310 Multimedia Projector

1 Answer

Poor image being displayed


Hi guys

You will be looking at either repairing or replacing the Mainboard where all the colour processing is done.

Sep 27, 2007 | Dell 2300MP Multimedia Projector

Not finding what you are looking for?
BenQ PB6100 Multimedia Projector Logo

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a BenQ Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...