Question about Computers & Internet

2 Answers

Error code on panasonic copier fp-1670

I am recieving an error code.. e301. I have tried everything to clear it out and nothing helps.The error code is flashing. Hope someone can help me. I am new to fixya so i have alot of things i need help with that has been sitting around not getting fixed because hiring it done is toooo costly! Thanks for the help.

Posted by on

  • NeedsFixin May 20, 2008

    I did exactly as your directions said and it took care of my error message and is working fine now.. i even turned it off again and back on and still didnt get the error code so thanks so much for the solution.

×

2 Answers

I cannnot send sms message on hiphone

Posted on Sep 19, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 168 Answers

Welcome to Fixya.
Hopefully we can answer some if not all of your questions.

An E3-01 is an error code for your toner hopper. Did you just recently change your toner bottle?
If so, open your front door, take the toner bottle out. Close the front door, turn the machine on, and let the machine cycle and stop.
After the machine is stopped, then open the door and then place the toner cartridge back in.
Close the door, and if the error code doesn't come back your problem should be fixed.

Let me know if you have any other problems.
Good luck
Please post a rating if I have helped you with your question/problem.
have a good day
Mac =)

Posted on May 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a P5K Deluxe asus mother board error beeps no visuals


Two beeps is usually the video card.
Do you have a spare video card to change out?
This is why people keep obsolete PCI video cards for just such tests.

Dec 05, 2015 | ASUS P5k Deluxe Socket 775 Motherboard

1 Answer

Trying to sign forgot password and I am not getting a code to do so I have been trying all month


do a full restore,find the proper button sequence online for your particular model to get into the recovery menu,usually volume up or down and power for so mamy seconds but make sure first.

Feb 27, 2015 | Samsung Galaxy Tab 2 7in. WiFi Tablet, 8GB

1 Answer

Bios is broken


its not clear; do you swap a bios chip from a pc to another? if yes you need to flash the bios with the right one version of your motherboard.

Apr 06, 2014 | Gigabyte GA-Z68AP-D3 rev. 2.0, LGA1155,...

1 Answer

GPU hardware not recognised


Hello the homepage is here:

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=583#dl

Try to download a manual if you don`t have it.
If any drivers for the mainboard is missing install them.

Install the newest NVIDIA graphic driver from here:

http://www.geforce.com/drivers/results/49949

This is the 64 bit version.

Check also if the graphic card is properly insertet
in the slot on the mainboard.
And the graphic card has to support PCI-E X16
This graphic card needs extenal power
from the power supply to work
the power supply has a wire with pci-e stamped in did you connect this ???.

Try to disable the onboard graphic in the device manager.

Good luck

Nov 15, 2012 | Biostar TZ75B ATX Intel Motherboard with...

1 Answer

Istalling new computer components, first boot up and nothing will display.


If the board has built in graphics, connect the monitor to that temporarily. In the BIOS you can select the preferred order of the GPU.
Something like PCI - PCIe - IGFX should be your choice.
You may have a bad video card, or a bad mobo. Swap a different card in first to make sure. Also if this is a gaming machine with a high power card you may not have a powerful enough PSU to start the system. The PSU is actually the most important component, and many times the most often one people cheap out on.

Hope this helps!

Jun 01, 2012 | Biostar TPower X79 Ver. 5.x

1 Answer

I installed a 500 mhz pentium 3 cpu on a IBM 36L9059 motherboard now I get an error when I boot up CPU BIOS update code mismatch How can I clear the error


GOOD DAY..!! pENTium 23 right now is not existing in tha market but since you encounter its problem,i think best solution for that is to buy a new one coz pentium 3 parts is hard to find in the market..thanks

Aug 17, 2011 | IBM Computers & Internet

1 Answer

Paperjam on fp 1670


maybe your printer has dust or dirt inside.... or something that can make your printer jam... try to clean first your printer.... ^^

Dec 12, 2008 | Computers & Internet

1 Answer

Error Code


All you can do is Reinstall windows. You should get the Windows Vista Installation CD with your laptop and all you have to do is put it in and restart your computer and when the message that says "Press any key to boot from CD" press a key.

If it doesn't show up, you may have to press a key like DEL or F12 to get the boot sequencer. When you first turn on the computer you should see the Compaq logo. At the bottom of the screen you should see some buttons to press to do things like BIOS and Boot Sequence. You want Boot Sequence. Once in boot sequence, select the CD-DVD and press any key when it says to.

Once in follow instructions or oyu can reply and i will tell you how to install.

Oct 06, 2008 | Compaq Computers & Internet

1 Answer

Error on Page


I suspect that this is a rendering problem. Try downloading Firefox from the following page www.getfirefox.com. Then open Firefox and go to the website.

Jun 15, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98816 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...