Question about Samsung ML-2571N Laser Printer

Open Question

Samsung ML-2571N Laser Printer Won't print

Both of the lights on the front are on and green. Nothing will print. Tried turning it on and off, unplugging etc. but won't print...

Posted by on

  • chessucat Sep 17, 2008

    On my printer, the cover-m-jam #2 part has a piece that push down on a contact switch in the back of printer. When push the black switch down it should operate, but the problem is the paper won't pass through the fuser assembly. So, I guess I will have to replace the fuser assembly and the cover-m-jam #2 part.


×

6 Suggested Answers

SOURCE: Samsung ML2250 Laser Printer - trouble during power up

receiving faxes

Posted on Feb 22, 2008


checkitright
  • 1346 Answers

SOURCE: Samsung ML 1210 Laser Printer

check here

http://www.precisionroller.com/catalog_display.php?fm=0&step=3&MfrID=175&ModelID=3491&CategoryIDs%5B%5D=26

Posted on Jul 25, 2008

  • 14 Answers

SOURCE: Driver Samsung Laser Printer ML-1210

Need driver for Samsung Laser Printer ML-1210

Posted on Sep 23, 2008

  • 1 Answer

SOURCE: Driver for Samsung ML-1640 for WIN98SE

I got the same problem. It seems they did not develop specific drivers for win98se. However, I found that you can print using the drivers for the old Samsung ML-2510. Win98se drivers for that printer can still be downloaded from Samsung website. I've been using the 2510 drivers with the 1640 printer for a couple of months, and worked fine so far. It seems very little change in electronics from the 2510 to the 1640 model.
You need also Virtual Printer Port for USB from microsoft.

Posted on Jan 20, 2009

jonb3838
  • 237 Answers

SOURCE: Samsung ml 1640 after refill

Its unfortunate a lot of times after the ink has been refilled a lot of companies do not have the proper equipment to reset the cartridges and this is what happens. It will give a test print but the printer is not reconizing it as one of its own. It could just be a bad refill job. I would suggest taking it back to the place you refilled it had see if they can replace it for you.

Posted on Feb 13, 2009

  • 1 Answer

SOURCE: Samsung ML-2000

from where i can download printer driver for samsung ml-2000 series laser printer

Posted on Apr 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The printer does not accept print jobs and orange warning light is on along with green ready. Both lights sart blinking when a printing job is sent. The printer does not print. How can I fix the probl


Dear
I am not familiar with Ubuntu. So in case of windows SMART PANEL/EASY PRINTER MANAGER can be down loaded from samsung web this will show the errors that the machine has.

Try to print a self (demo page) pressing stop s/w a while. If it works check the life of toner cart.

Thanks.

Sep 19, 2014 | Samsung ML-2571N Laser Printer

1 Answer

The green and yellow light is in standby. how i fix this problem


please install the smartpanel software from www.samsung.com. the program will read the error and displays on your computer. then you can take action on error displayed.

Jan 30, 2013 | Samsung ML-2571N Laser Printer

1 Answer

Green and red leds are blinking


Hi
Try turning the printer off and on.
Clear any paper jam on the machine.
Disconnect it from the power supply and then re-connect it after a while.

Feb 27, 2012 | Samsung ML-2571N Laser Printer

1 Answer

I have samsung ML 2570 printer and i cannot printer through it coz both lights on the printer are blinking and printer does not respond.


My printer is doing that as well, if you've found a solution please e-mail me at hannahlee0115@gmail.com

Nov 15, 2010 | Samsung ML-2571N Laser Printer

2 Answers

My samsung ML2010 printer has Error button flashing green


your printer is not inisilize properly. it is a logic card problem.so pls you can repaired it from printer vendor.

Sep 02, 2009 | Samsung ML 2010 Laser Printer

1 Answer

My samsung ml 2571n print only the first page


motherboard faulty,cannot process data.change

Jun 18, 2009 | Samsung ML-2571N Laser Printer

1 Answer

I have a ml-2571n and after my toner got low on a cartridge, I replaced with a new one and it still flashes the toner low light. Didn't know if there is a way to clear or reset or if this normal. on this...


It's not a "new cartridge" is it? it's remanufactured or compatible?
There is a fuse on the front of the cartridge that is either missing, or defective. this is what resets the toner counter

Apr 08, 2009 | Samsung ML-2571N Laser Printer

1 Answer

Samsung ML-2571N Laser Printer - paper jammed around roller


http://www.samsung.com/us/consumer/detail/support.do?group=printersmultifunction&type=printersmultifunction&subtype=monochromelaserprinters&model_cd=ML-2571N/XAA&mode=C
this link will guide you to the site with the user guides...but in short ..all ya have to do is to be careful and to open and remove the paper...there are not many things that may be damaged in the process...but there is a certain order you have to follow in doing it ...and a few devices that has unusual safety removing gadgets...

Aug 01, 2008 | Samsung ML-2570 Laser Printer

Not finding what you are looking for?
Samsung ML-2571N Laser Printer Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

sureshd2008

Level 1 Expert

25 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...