Question about Computers & Internet

1 Answer

Write delay failed

Hi all,hope you might be able to help me out here...i'm running a toshiba 330 with xp,and a max one touch +,was trying to import a wav file into a music project from E drive when a pop up said..E:$write delay failed,please try to save file elsewhere,the computer then froze and upon rebooting,all contents of E had gone,it now shows E as local (basic ) disc in the disc management..it says the disc is healthy and though it is a 500g hrd drive its says 465..yet when clicking on properties the whole pie is blue and the disc "raw"...am i able to get this back to a nfts file and recover the data.hope this makes sense(it does'nt for me)..any help would be greatly appreciated..thanks guys

Posted by on

  • Anonymous Mar 27, 2009

    Hi all,hope you might be able to help me out here...i'm running a toshiba 330 with xp,and a max one touch +,was trying to import a wav file into a music project from E drive when a pop up said..E:$write delay failed,please try to save file elsewhere,the computer then froze and upon rebooting,all contents of E had gone,it now shows E as local (basic ) disc in the disc management..it says the disc is healthy and though it is a 500g hrd drive its says 465..yet when clicking on properties the whole pie is blue and the disc "raw"...am i able to get this back to a nfts file and recover the data.hope this makes sense(it does'nt for me)..any help would be greatly appreciated..thanks guys

  • Glenn Rogers
    Glenn Rogers May 11, 2010

    Don't you have a support CD for your backup drive? Have you used that to access your backup drive and check disk integraty from their suite of tools?

    Worldvet


×

1 Answer

Thanks worldvet,yeah i tried that and it says its all good???,never mind ,i,m taking it down to the shop..thanks again for your help...cheers

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to save anything on my Toshiba Hard drive Error Window delayed write failed


Howdy - there is a Microsoft Bulletin about this issue (If you're running XP).
Take a look at the info presented at:
http://support.microsoft.com/kb/330174
There's a link there to info about the problem in Windows 7 if thats what your using.
Good Luck, Mikeywaf

Feb 15, 2011 | Toshiba HDDR500E04ERCS 500 GB USB 2.0 Hard...

3 Answers

I want to upgrade my from 512 to 2GB RAM. Pls let me know which brand RAM and speed will suport to upgrade the same. my motherboard is P5RD2-VM, with intel pentium D 820 processor. pls guide me on the...


Your Motherboard will support:

2 x 240-pin DIMM's (4GB Max)
Unbuffered
non-ECC
667/533/400 MHz DDR2

You should be pretty safe with any main brand name of memory from your local computer shop.

Below is a list of ASUS TESTED and Qualifed Vendor RAM.


gr1ms_1.png

Jan 02, 2011 | ASUS P5RD2-VM Motherboard

1 Answer

Hi I got a password on a toshiba satellite l505d bios and i can gain access to my system until i got so i need ur help plz


Hi sorry for the delay you could load some defaults there are other ways of getting your computer running if this fails i cant type these in now keep trying
During the boot process you will see on the screen to press a certain key to enter setup
Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart

hope this helps

Dec 30, 2010 | Toshiba Satellite L505-S5966 Notebook

1 Answer

CHICONY RUN SOURCE FAILED problem Toshiba Satellite p205-s7469


http://support.acer-euro.com/drivers/downloads_gd.html  its acer link but acer uses Chicony in some of models and work fine.  click on the link and you will see a lot of drivers find the chicony and try 
keep me informed pls.

May 29, 2009 | Toshiba Satellite P205-S7476 Notebook

1 Answer

More RAM wanted


Max is 256M Memory. You're much better off getting a new system. A new motherboard, processor and ram isn't that much...

Mar 16, 2009 | E-Machines eMachines Desktop PC

1 Answer

Synchronizing dsl failure with speedtouch 330 on Vista


you can download speedtouch installation drive for (windows VISTA) from www.speedtouch.com

Feb 03, 2009 | Alcatel Speed Touch USB (3EC18607GA) Modem

1 Answer

Slow


Getting 330 error. In order to fix that, you can run this command at dos prompt > SFC /SCANNOW
It can fix errors at windows XP. Normally there are two memory slots for toshiba satellite. You might be running at 512 or two 256. You can purchase two 512 or i 1g.

Oct 07, 2008 | Toshiba Satellite A25-S207 Notebook

1 Answer

Toshiba satellite screen blank


This could be that the hard drive has failed, and could also be the reason for the initial crash. Run a drive test in the bios or set up. If the test fails in any area then the hard drive is bad and will need replaced. If it passes, then reformat the drive and reinstall XP.

Jul 29, 2008 | Toshiba Satellite A100-S8111TD Notebook

1 Answer

Toshiba l45-7423 laptop has two memory slots. With 512 in each, runs ok. With 2 gig in top slot, 512 in bottom slot, runs ok. with 2 gig in bottom slot, says it has memory errors. this limits me to 2.5 gig...


HI embreelynn,

just want to check, did you left the top slot open when you put the 2gig in the bottom slot, if you do, I suggest you try it with the 512 in the top slot and the 2gig in the bottom, the reason is that some mobo implements "banking" which means that you'll have to fill in the 1 mem slot before the using 2nd, 3rd and so on.

hope this helps, regards.

Jul 12, 2008 | Toshiba Computers & Internet

1 Answer

MAX HDD CAPACITY ADDRESSABLE


Hi john,
The issue what operating system are you running? Not your board).
Windows 98 can see a max of 64GB & windows 98SE, 137GB. Win XP can see a max of 2 exobytes.
(What is 1exobyte, EB. In decimal terms, an exabyte is a billion gigabytes).

Your 160BG drive is safe with XP.

Mike

Apr 21, 2008 | MSI KT4V (MS-6712) Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...