Question about HP Compaq nx7300 Notebook

1 Answer

NX7300 - no display after powering machine

No display after powering on the machine. The only light on is the audio and the power. There is a fan sound... i have tried removing and replacing the battery and still have the same problem. It happened after closing my lid and it went into standby/hybernate mode.

Posted by on

  • barabing bar Jun 17, 2008

    No display after powering on the machine. The only light on is the audio and the power. There is a fan sound... i have tried removing and replacing the battery and still have the same problem. It happened after closing my lid and it went into standby/hybernate mode. Mine is PresarioB1200..

  • Anonymous Aug 02, 2008

    My Nx7300 switches on and off constantly.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 53 Answers

Hi,


As there is no display but the power leds are glowing on the notebook, we cannot perform any troubleshooting steps otherthan Power drain.

Here are is the Power drain procedure:

Try doing power drain by taking out the battery & keep holding down the power button for complete one minute to drain out the power from the computer components. Restart the computer after putting the battery in.
Try restarting the computer only with the AC power, without the battery & vice-versa.

That should resolve the issue. If the issue persists, then you need to contact HP if your notebook is underwarranty. if there is not warranty, you have to contact service center.

Note: There is difference between removing/replacing the battery and power drain. Power drain should resolve the issue.

Posted on Aug 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audio driver xp2 hp compaq nx7300


All drivers are available at hp.com. If they haven't got one, there may be generic drivers at microsoft.

Dec 05, 2013 | HP Compaq nx7300 Notebook

3 Answers

My HP compaq nx7300 screen appears to be very dark


Hello
The CFL (cathode florescent lamp) of screen has gone fuse, need replacement,
Good Luck, and do rate the solution if it helps

Dec 08, 2010 | HP Compaq nx7300 Notebook

1 Answer

Laptop NX 7300 booting problem


DEAR first you check any beep come in laptop
after that check any beep com when you remove the laptop RAM....
If after remove ram any beep come then repalce your laptop ram and try .....
if not then tell me after that ill tell you ....

Aug 27, 2009 | HP Compaq nx7300 Notebook

2 Answers

My nx7300 is not booting up. I have some lights that go on and the fan is running, but no screen, and no keyboard functions. The battery is about 1.5 years old


Hi
Try resetting the ram, ie remove battery, press on button a few times to de-enrgise system then remove cover under laptop (Be very careful not to lose the tiny screws) gently ease ram stick(s) out then replace. Ensure the battery charger is also plugged in as you may have very low battery.

Cheers cbacer

Aug 11, 2009 | HP Compaq nx7300 Notebook

1 Answer

HDA AUDIO DRIVER NOT FOUND


Run system restore to factory default setting.

this takes your computer back to new state.

Rate this.

Jun 03, 2009 | HP Compaq nx7300 Notebook

1 Answer

Enternal power supply unit for a hp compaq nx7300


The part numbers for power supplies for your PC can be found HERE.

Mar 10, 2009 | HP Compaq nx7300 Notebook PC

1 Answer

Bios update


Hello!!


I am not sure after installing which update the display has gone. I mean Windows update or HP software update or BIOS update.

Let me take the senario of the BIOS update and assist you in this regard.

If the display has gone after installing the BIOS update, then the issue cases are 1. Installed wrong BIOS update 2. Notebooks might have restarted or hanged while installing the BIOS update.

In both the cases BIOS will get currupt and there will be no display on the notebook.

Solution for the issue is: If you notebook is under warranty, HP will arrange for mail-in repair, plss contact HP. If the notebook is out of warranty, then you need to contact HP authorized service center.

Aug 07, 2008 | HP Compaq nx7300 Notebook

1 Answer

HP Compaq nx7300


bigphish,
Great!
Can you rate me as "Fixya"...

Jan 12, 2008 | PC Laptops

2 Answers

HP Compaq nx7300


by removing your battery you are not going to loss your data
so you can do it
but i think you should try this battery by abstract this battery first and than clean that chep by air and reconnect your battery you will find the solution

Jan 12, 2008 | HP Compaq nx7300 Notebook PC

Not finding what you are looking for?
HP Compaq nx7300 Notebook Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Laptops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a HP PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...