Question about Toshiba 43H72 43" Rear Projection Television

1 Answer

Toshiba 43H72 My screen is like watching a 3d movie without having the glasses on. Is there a certain part I need to have or what?

Posted by on

  • 3 more comments 
  • lars08 May 20, 2008

    which circuit board do we have to take out?

  • lars08 May 20, 2008

    Do I have to take a circuit board out, and if so which one?

  • lars08 May 21, 2008

    which circuit board do I haveto take out?

  • lars08 May 25, 2008

    I received my convergence ICs and I received no instructions on how to install them. Is there any way that you could help me with this so I can get it fixed. I need to know what circuit board I have to take out to find what I am looking for. Please help me. Thanks for your help.

  • lars08 May 26, 2008

    We got the new STK's and can see where the old ones are, but we can't figure out how to get to them. There are two large 8" square rectangular silver plates about 3/4" thick that are in the way. Suggestions?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 8,617 Answers

You need to replace both convergence ICs they are STK392-110 you can get new replacements at the following link and they provide free instalation instructions with pictures so you can do the repair yourself in about a half an hour. You need to replace both ICs same numbers STK392-110. Heres the link.
http://servicemanuals.vstore.ca/

Posted on May 20, 2008

  • 2 more comments 
  • Sonny Berry
    Sonny Berry May 20, 2008

    You will notice a two large ICs attached to large aluminum heat sinks the ICs look like this.

  • Sonny Berry
    Sonny Berry May 21, 2008

    The signal board its the large board that doesnt have the HV generator on it

  • Sonny Berry
    Sonny Berry May 25, 2008

    Did you get the from the link I posted? If so go to their site and leave an email and they will send the instructions

  • Sonny Berry
    Sonny Berry May 26, 2008

    Those are the heat sinks. the board should just be secured with screws around the perimeter

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i convert 3d split screen to half sbs so i can watch 3d movies on my soniq E55S148 3d tv


I would suggest you know what you're talking about first
SBS means side by side It's not 3D SBS is a format to be used in conjunction with virtual reality headset/ goggles
If its HSSBS half screen side by side that you mean then that is for viewing on a small hand held device and you still need the VR goggles
So if you are downloading actual SBS you can't split it
If its HSSBS the file is too compressed to view on a TV
If its 3D format you need a 3D TV and use the 3D glasses
You can however use software to convert SBS to 3D format whilst its stored on the device you downloaded it to but when you play it on any TV it will have no 3d effect even with glasses
So until you sort out if its SBS or 3D you haven't got a hope
split screen 3d or simul view is only really meant to support two player games
More importantly you shouldn't have been such a cheapskate and invested in a proper TV Soniq uses a mix of branded and Chinese components that aren't 100% compatible so no amount of add ons ?or software upgrade will convert that piece of junk to anything that is capable of playing SBS HSSBS or 3D
If you want good quality adult movies you should pay to join a reputable site but if you choose to download pirated p?r? you can only expect to get what you pay for
My question for you is if you wanted to watch SBS why did you download in 3D and then want to convert back to a format that is not 3D?

Feb 03, 2015 | Cell Phones

1 Answer

How can enable 3d on philips led 40pfl8605h?


Do you have the PTA02 accessory for the TV? This is a USB 3D transmitter and comes with 2 pairs of Active 3D glasses. The screen of the 40PFL8605H is not a 3D TV by itself.

Once you have the accessory plugged in, you may need to wait for the software to be installed on your TV before you can watch 3D content. See the manual for the TV for more information: http://download.p4c.philips.com/files/4/40pfl8605h_12/40pfl8605h_12_dfu_eng.pdf . This is on page 73 of the PDF.

I hope this helps. If you have the 3D accessory plugged in, try turning off the TV and turning it back on if the software did not install properly. The final thing to check is the "codecs" for your 3D movies on the USB stick. Make sure that they are compatible with the TV.

Cindy Wells

Apr 19, 2013 | Philips Televison & Video

1 Answer

What kind of TV supports 3D?


You need to look for TV's labeled 3D ready feature a screen capable of displaying 3D content, and have the necessary emitter built-in. One important thing to keep in mind is that you'll need more than just a 3D TV to watch 3D at home - you'll also need pairs of 3D Glasses for anyone watching, as well as a 3D video source, like a 3D Blu-ray movie.

Jul 29, 2012 | Furniture

1 Answer

How to play a 3d movie on a normal HD screen.............


Unfortunately, there is no way you can do this without making some adjustments to either the movie clip or to your TV.
These adjustments could eventually end up in making the 3D movie more or less a normal HD movie.
The best way is to buy a 3D TV and glasses. This would help you watch the movie in 3D.

Feb 12, 2011 | Digital Anarchy 3D Tools Suite (3DTOOLW)

1 Answer

Looks like 3D with out the glasses


you need the phillips dptv 305 - dptv345 chassis convergence repair kit which contains both convergence ics and all feed resistors and also free installation instructions with pictures. heres the link.
http://servicemanuals.vstore.ca/

Jan 22, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Shadow on screen. Looks like you're watching a 3D movie without the glasses.


youre convergence ICs need replacement, please respond to this same post with your model number and I will post the correct ICs for your set.

Sep 04, 2008 | Televison & Video

Not finding what you are looking for?
Toshiba 43H72 43" Rear Projection Television Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73086 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...