Question about Cuisinart DCC-1200 Coffee Maker

1 Answer

Cuisinart dcc 1200 will not brew

This maker will not brew all the lights come on but thats all that happens.
tried to clean and decalcify but nothing happened. what would my next step be

Posted by on

  • 3 more comments 
  • sheghamami May 22, 2008

    i turn the coffee maker on and all the ligths come on. it produces steam but no water will transfer into the pot

  • Anonymous Mar 25, 2014

    The light comes on when I turn the coffeemaker on....there is a click but nothing happens. It won't brew...it is 3 years old.

  • Anonymous Mar 26, 2014

    i have reset the programming function to the factory default. I have emptied and cleaned the drip tray and steam wand. Yes there is water in it!

  • Massad Homani
    Massad Homani Nov 13, 2014

    http://www.consumeraffairs.com/news04/20...

  • Massad Homani
    Massad Homani Nov 13, 2014

    Most likely you have same problem as many, something caused the maker to overheat which triggered one or both of the thermal fuses to prevent fire. I don't recommend fixing it. The fuses blew for some reason and you'd need to make sure you took care of that first.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I'lm not sure of the model, but it is a Cusinart Coffee Maker with a Glass Pot. It gets power on all lights except the ON/OFF switch, and it willl not brew. Any suggestions, or should I trash it and get a new Coffee Maker. This one is approx. 1 year old. Thanks for your advise.

Posted on Oct 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My7 DCC-1200 series coffee maker fail to brewe, light goes on but nothing happens


have you checked if the water filter needs to be replaced? this happened to me before and when the filter is worn water is not getting through so try to replace it. its only $5 on Amazon so worth the cost before you toss it.

Hope this helps.

Mar 19, 2013 | Cuisinart Dcc-1200 Brew Central 12-cup...

2 Answers

Coffee maker not working


Hi,

Here are some of the most common problems that can cause your drip coffee maker to stop working:
  • The power cord or on/off switch can go bad. In either of these cases, it's best to get a pro to replace it or buy a new coffee maker -- replacing it improperly can lead to a fire.
  • The one-way valve can get clogged open or closed. You can usually fish out the debris that causes this problem with a toothpick.
  • The tubes can get clogged with calcium. This is especially true of the aluminum heating tube. The normal way to solve this problem is to run vinegar through the machine once, and then run two batches of water through to clean out the vinegar.
There are two problems that are nearly impossible to fix:

Failure of one of the heat-sensitive switches
43b469a.jpg
(This is The coffee maker's temperature sensors)


Failure of the heating coil:
4cd7885.jpg

(This is the The coffee maker heating coil)

Because it's nearly impossible to get replacement parts, you probably have to buy a new coffee maker if one of these problems disables your machine. Now, when you make coffee tomorrow morning, you can do so with a new appreciation for exactly what's happening inside.


Goodluck,
Please don't forget to rate the solution





Apr 01, 2008 | Keurig B50 Coffee Maker

1 Answer

Coffee maker turns on but will not brew


why question to all of this is with a "self clean" button, why doesn't it every tell you to clean it..... ??

Sep 07, 2012 | Cuisinart DCC-1200 Coffee Maker

1 Answer

WATER LEAKS BOTTOM OF UNIT WHEN IS MAKING COFFEE ALSO, HOW DO YOU DECALCIFY UNIT? iS THERE AN ON LINE MANUAL?


Hi,
Below are solutions for a leaking coffee maker and how to decalcify the machine?
Tools and Materials needed to fix this problem are as:
* White Vinegar * Fresh Water * Volt-ohm Meter * Screwdriver
Step 1 - Clean
If your coffee maker seems to be clogged, try cleaning it with a mixture of white vinegar and water. Assuming that your coffee maker has a 12 cup capacity you will want to use 11 cups of vinegar and 1 cup of water. Fill the coffee pot to the 11 cup mark with vinegar and then fill it to the 12 cup mark with water.
Pour this mixture into the reservoir and turn on the coffee maker, allowing it to run through a brewing cycle as if you were making a pot of coffee. By doing this you will dissolve any build up in your coffee maker. If the coffee maker is leaking because the pump is clogged, then this might clear the clog and stop the leaking. If it has been a while since you last cleaned your coffee maker, you may need to run the vinegar through more than one cleaning cycle to dissolve all of the buildup.
Step 2 - Pump Valve
Unplug the coffee maker and examine the pump valve. If the pump valve is broken or has a clog, then the water will not be able to rise up and flow through the fill tube. When the coffee maker is turned on, the water needs to go someplace. If it cannot flow through the fill tube, then it may leak onto the countertop. If the pump in your coffee maker is sealed, you will need to replace the whole pump. If the pump is not sealed you should check it to ensure it is not clogged with coffee grounds or mineral deposits.
Step 3 - Brew Switch
Examine the brewing switch to ensure that is working. To get to the brewing switch, remove the base plate. Next, you will need to test the switch with your volt-ohm meter. Touch the tester to the RX1 scale. If it reads 0 ohms then you will know that the switch works fine. If it gives you a number other than 0 then it is time to replace the switch.
Step 4 - Tube Connectors
If the coffee maker is leaking or sputtering then you should take a look at the tube connectors. Many times, a leaky coffee maker is caused by faulty tube connectors. If you find the leak is in an elbow, clean the surfaces before you replace it. If the tube connector leaks, replace both the tube and the elbow so that you can be sure the pieces will both fit together properly.
To decalcify, you will be needing a : decalcifying cleaner and A container large enough to hold the same quantity of liquid as your water reservoir
1) Remove the machine's water reservoir. 2) Empty all liquid from the reservoir. 3) Fill the reservoir with warm water. 4) Add one packet of the recommended cleaner to the full reservoir and stir until the cleaner is dissolved. 5) Return the water reservoir to the machine. 6) Turn the machine on. 7) Set the large container underneath the steam wand. 8) Set up your machine so that hot water -NOT steam-will be emitted from the steam wand when the steam valve is opened. 9) Open the steam valve according to the manufacturer's instructions. 10) After all of the decalcifying solution has drained into the large container (within a few minutes this will occur), remove it and discard the liquid that has been collected. 11) Rinse the water reservoir thoroughly and then fill it with the type of water you usually use for brewing. 12) Return the water reservoir to its normal position. 13) Using only water repeat steps 7 through 9 until the water reservoir is empty again.
I hope the above helps....
Good luck.

Jun 22, 2011 | Jura Capresso Impressa S8 Coffee Maker,...

1 Answer

I turn on my Mr. coffee maker and it just beeps and won't brew any coffee. What could it be?


Tried to clean it, everytime you press the brew button it just beeps and if we try to set it to clean it sounds like it tries to turn on but nothing happens.

Apr 27, 2011 | Mr. Coffee 072179228578 12 Cup Coffee...

1 Answer

How do I clean my cuisinart DCC-12


1/3 cup of white vinegar and 2/3 cup of water. Run through brew cycle. Run brew cycle again with plain water.

Sep 14, 2010 | Cuisinart DCC-1200 Coffee Maker

1 Answer

I have lost by cleaning manual for my dcc-1200 coffee maker. I need to clean it the light won't shut off. Thanks, Dawn Miller


Fill water reservoir with 1/3 carafe distilled white vinegar, 2/3 carafe water and hit the self-clean button - it will take about 35 mins to complete. When it is done, it will beep like it normally does when brewing regular coffee. Self-clean light should go off after this. If it doesn't, simply unplug the machine for 20 minutes or longer. The manual is available for your inspection on the Cuisinart website.

Sep 07, 2009 | Cuisinart DCC-1200 Coffee Maker

Not finding what you are looking for?
Cuisinart DCC-1200 Coffee Maker Logo

2,606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cuisinart Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Cuisinart Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...