Question about ASUS P4P800SE Motherboard

1 Answer

Pluging in extra usb ports/Mic and headphone jacks from the tower

I have a Antec Tower that has 2 usb ports as well as a headphone and Microphone jack on the front of the tower I am trying to figure out how to plug them into the motherboard so I can use them but I cant find any information on the motherboard telling me how to do so.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Answer me this. You're case is an Antec tower? The motherboard is the Asus P4P800 SE ? Is this correct?
If you have you're manual you can see what goes where on the board for front panel connector page. 2-31. (This diagram shows you how to connect the front mic & speaker).
To connect the Antec's front USB ports plug the case USB front connectors onto USB56 & USB78 shown on page. 2-30. Most case wires are already set within their USB connectors & the Antec's front USB connector should fit right on the mother board's pin's. If you need you're user manual, download from Asus by clicking on this link. http://support.asus.com/download/download.aspx?modelname=P4P800%20SE&SLanguage=en-us

Good Luck!
Mike

Posted on May 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a "line in" on MTC2?


There is a line in port on the audio of this computer. Turn the system around and look at the rear of the tower or get a flashlight and look at the back. The line in port is the 3.5 mm audio port with a light blue ring around the port. You will have to go into the control panel to use the line in after connecting the device. The default setting is for the microphone jack to be the active audio input. Open the Control Panel. Go to Devices and Hardware (or Hardware and Sound). Look for the Audio section and Manage Audio Devices. Click on the Recording tab. Set the Line In as the default. Note: you may need additional hardware, like a pre-amplifier, to get this to work. I've done it with a cassette player using the headphone jack which didn't need any extra hardware.

MCT2 doesn't specify any Dell desktop model. This term indicates the size of the desktop tower (mid-size tower). That differentiates it from the mini desktops and the full-size towers. You may have a Dell Dimension 2400 or a different model.

Accessing the Control Panel involves clicking the Start button for Windows XP, Vista and 7. For Windows 8, 8.1, and 10, pressing the Windows key + X is a faster route. (There are other options. For Windows 10, right click on the Start button.)

I hope this helps.

Cindy Wells

Mar 21, 2016 | Dell Computers & Internet

1 Answer

My speaker jack broke off inside my audio input in the back of the computer. I want to use the thermaltake case's front usb and audio out/mic in jacks, but they don't seem to get power or work. My drivers...


> Have you removed the broken jack from the rear end of the pc ?
> Are you trying to use the audio ports on the front panel ?
> if you are trying to use the audio port on the front panel you will first need to remove the piece of the broken jack stuck in the rear port - cos you can take an audio out line either from the front OR the rear any one

Oct 22, 2013 | Thermaltake Mid-Tower VL10001W2Z Element G...

2 Answers

How to i connect my bose companion 2speakers to my computer and get sound


hi, first Identify what computer you have. Is It A Mac or PC?

If it is PC
-------------
There should be 2 small 3.5mm coloured sockets on the back,front (or both ) of the main box (tower/desktop unit). You should find that they are coloured Green and Red. Green is for sound output (Headphones/speakers or hifi) and the Red is for sound input or Recording. Used for things like microphones. Some will accept line sources such as mixers and Ipods pr cassette players, but please check your sound manager, mixer settings in your opperating system to make your you have an adjustable input setting for Mic and Line input attenuation as not all do and you may end up with a distorted mess. You may also find there is a small diagram of headphones or a microphone to indicate sound "in" and "out" ports.

If you have a mac
-------------------------

Appart fom me being envious :-) there are two sockets. On laptop types, on the side or on the tower types on the front,back or both. They have a diagram of a microphone and headphones. Hadphones is for audio output to headphones, speakers, hifi, dj mixer. The Microphone is a sound input. Please read above for microphone port usage. Hopefully this answers your question. Please also bear in mind that if you have no sound once plugged in, you may need to adjust the audio properties in the system in the system and/or program you may be using

Dec 29, 2010 | Bose Companion 2 Series II Multimedia...

2 Answers

Does my Inspiron 9400 Laptop have build in microphones?


Yes It is. You can check them either in COntrol Panel > SOund or Start > Run > DXDIAG.

WIth regards
FIXYA team

Oct 09, 2010 | Dell Inspiron 9400 Notebook

1 Answer

Where does the Microphone plug in to the Dell Vostro200


Depending on the chassis-style of your Vostro 200 (Slim-line or Tower), you may have one or more options for installing a microphone.
See below for instructions:
A. Slim-Line Model
There are two locations on this model (by default).
dd21be3.jpg
Front: You have the power button, then 2 x USB ports, 1 x Headphone jack-out, and 1 x Microphone jack-in.
c53ea7f.jpeg
Rear: There is a block of six audio connectors, looking only at the bottom 3 (red, green & blue).
Red = Microphone jack-in Green = Speaker/Audio jack-out Blue = Audio jack-in

B. Tower Model
There is one location on this model (by default):
f0bc025.jpg
Rear: There is a block of six audio connectors, looking only at the bottom 3 (red, green & blue).
Red = Microphone jack-in Green = Speaker/Audio jack-out Blue = Audio jack-in

Aug 15, 2010 | Dell Vostro 200 PC Desktop

2 Answers

Where can i find front usb ports with the 2 headphone jacks


well it all depends on the tower and motherboard. Typically not located on the motherboard itself, it is usually plugged into a port on the motherboard port and extends to the top of the tower or front of it. "Front panel USB Ports"

Feb 08, 2010 | Computers & Internet

2 Answers

How to connect a microphone to Logictech z-340 ?


Hi there and happy new Year , Your Microphone has to be connect to your PC in the Red or Orange Color COded Jack Input , it cannot connect too your Speaker System ...
Hope this helped bud

Dec 26, 2009 | Logitech Z-340 Computer Speakers

1 Answer

Front headphone and microphone jack don't work.


Based on what you've submitted, I'm listing a number of solutions which may or may not help. Try the following:

1.) Double-check the color coding on the jack to the port and ensure they match.

2.) Go to Start Menu>>Control Panel>>Sounds and Audio Devices. If it says you have "No Audio Device", then we have a problem.

If it says you have an audio device, tinker with the tabs and settings until your sound output is good.

Please let me know if this helps. If you need further troubleshooting, feel free to ask me directly! Take care.

Aug 07, 2008 | Sky Hawk Computers (PSR5601W-SL) ATX...

2 Answers

Headphone jack not working.


If you have a headphone jack at the front and the back, it may be a wire to the front panel is not connected properly on the Motherboard.

Aug 03, 2007 | RaidMax Samurai 908 Yellow Mid Tower ATX...

Not finding what you are looking for?
ASUS P4P800SE Motherboard Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18346 Answers

David
David

Level 3 Expert

761 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...