Question about Televison & Video

1 Answer

I have PHILIPS 42pfl5332d/37. I was watching tv, and suddenly the screen goes blank. There's a blue light that turns on when the tv's on, however when the screen went blank, that blue light turned orange and kept blinking. I tried unplugging it, but it did not work. the tv also stopped responding to the control. what do i do?

Posted by on

  • donwhitman Jun 29, 2008

    I also have the PHILIPS 42PFL5332D/37. After roughly two hours of on-time, it turns itself off. I haven't paid attention to the indicator light; I just turn it back on. There's also clicking noise that comes from the back of the set sometimes- I think it's mostly when it is shutting down. I assume the noise is from the power transformer cooling off, but don't know.

    I've tried to see if there's a timer set that shuts it down, but have found nothing. I'm considering getting the $170/yr warranty. Any body else experiencing this?


  • Anonymous Jul 21, 2008

    I had the exact same problem. I paid for the TV tech to check and he said he needs to replace the main unit (where is the RCA connectors). The cost is approx. $550 (parts and labor).





×

1 Answer

I don't have that problem, my problem is that I lost my remote control, so I can't configure de channels.. I just have 4.. =S.. I can see the menu, but in the part that say start configuration, I cant activated without the control, I don't know what to do.. aNybody Knows??

Posted on Jul 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phillips 60 inch tv 60pl9200d/37 wont turn on the power button flashes blue


Look in the manual. (Page 4)

Turn the TV on From main supply: Ensure that the main supply is turned on. A blue indicator light on the front of the TV lights up. When the TV is turned on by the main supply, the blue indicator light will blink for 45 seconds. This is the lamp's start-up period. When the light goes off, press the POWER button on the remote control or power switch. Press POWER to turn on the TV.

http://www.retrevo.com/support/Philips-60PL9200D-TVs-manual/id/633ag423/t/2/

Telephone number Philips Customer Care Center: 1-888-PHILIPS (744-5477)

Aug 14, 2011 | Philips 60PL9200D Projection Televisions

1 Answer

I have Philips 50PL9126D/37 The red light on the front where the power indicator is keeps coming on. What does this mean? When it comes on my screen goes blank. Any suggestions?


The tv projection lamp in this tv been in the tv it like 2 years or more,tv in used daily like 4 or 5 hrs every day?The red LED light indicator is on,have a "LAMP"word written on the bazel frame?Yes,tv projection lamp life is over or eding.Tv reqire a new projection lamp.

Apr 05, 2011 | Philips 50PL9126D/37B 50" DLP TV

1 Answer

I have a philips tv model number is 60PL9200D/37. when i turn on my tv the blue power light flashes and the lights and fans cut on but not the actual screen. after a few seconds of blinking the lights and...


U hear alots of clinking too,when tv power on and the projection lamp tried to come on?Yes,tv have a problems with it board call the Ballast board also.This Ballast board only job is to help ignite the tv projection lamp.

Feb 03, 2011 | Philips 60PL9200D Projection Televisions

1 Answer

How do I upgrade my software?


get a flash drive (blank & formatted)..go to philips web site and see if there is any new firmware offered.for your tv model. if so download to flash drive...shut tv off...plug flash drive to usb port in back of tv....now turn on tv if firmware is need the tv will update (blue or blank screen) before you see a regular picture

Dec 28, 2009 | Philips 50PL9200D Projection Televisions

1 Answer

55" Projection TV


Check www.magnavoxhelp.com. They have a chip kit that may fix this problem.

Jun 29, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

I have a philips 30pw9100/37. i was watching tv when it went blank. now, whenever i turn it on or do anything, i hear a beeping sound coming out of the back of the tv. please help!


it needs to be repair, maybe the zener diode of that was shorted or the horizontal out Transistor. the cause is lose contact of other companents...

janex

Apr 23, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6445 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...