Question about Frigidaire Dishwashers
Bad touch pad.Look for visible cracks in areas you are touching if you see any replace the touch pad.On some rare occasions you have to replace the cintrol board on this model.
Posted on May 20, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 28, 2016 | Frigidaire Dishwashers
Apr 18, 2016 | Frigidaire Dishwashers
I appreciate your post, friend!
I understand that the clean, wash, and dry buttons on your Frigidaire dishwasher are blinking along with the four LED light. This appears to be a delay start cycle. I would recommend pressing the cancel button. If that does not clear the lights you can perform a reset and to do that you would need to disconnect power from the dishwasher for roughly ten minutes. I hope this is helpful. -Matt
Feb 20, 2015 | Frigidaire Dishwashers
Mar 22, 2014 | Frigidaire Dishwashers
Hello - Try resetting the dishwasher by disconnecting the power to the unit. This will clear most flashing lights. You can disconnect power by flipping the circuit house breaker off and back on for approximately two minutes. If this does not prove to be successful, contact a professional to move forward accurately. Dishwasher could possibly have a faulty control board or wiring failure.
Oct 10, 2012 | Frigidaire 24 in. PLD2850 Built-in...
Jul 17, 2010 | Frigidaire Dishwashers
Jun 20, 2010 | Dishwashers
Jan 20, 2009 | Frigidaire 24 in. PLD3465REC Stainless...
Aug 14, 2008 | Frigidaire 24 in. FDB1050RE Built-in...
Nov 01, 2007 | Frigidaire 24 in. FDB510LC Free-standing...
Dec 12, 2017 | Frigidaire Dishwashers
171 people viewed this question
Usually answered in minutes!