Question about HP vs15 15"LCD Flat Panel Monitor

1 Answer

NEC Accusync LCD92VM monitor

Ove the last few days my monitor's menu kept appearing on screen. Now it is on all of the time. It can be very difficult to turn the monitor off too. I would greatly appreciate any help.

Posted by on

  • Desdemona Jun 09, 2008

    Thanks for taking the time to help me. I haven't spilled anything on the monitor but I do think now that it may be that one or two of the buttons are maybe stuck or malfunctioning. It isn't apparent that any buttons are jammed. I have folded a sheet of paper in four and slid it through the top of two of the buttons . I have to keep it in place and I have peace. I have to take the plug out when I am turning it off, but that is OK.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 174 Answers

Hmmm, seen this one before, did you recently clean the screen with some kind of liquid cleaner/spray? I had to repair a monitor with same problems, some fluid had leaked onto the switch board....If not, any key's stuck or pressed in too hard?

Posted on Jun 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a NEC AccuSync LCD5V monitor and the picture on the screen will not extend over the whole screen....the right side has the picture re starting by about an inch


Windows 7 & Vista:
Right Click on your desktop and go to Personalization. Click on Desktop Background at the Bottom of the screen. On the Picture Position drop down menu, click Stretch and save changes.

Windows XP:
Right Click on the Desktop and click Properties. Go to the Desktop Tab. Select stretch from the drop down menu. Apply.

Please Rate my answer. Thank you.

Apr 19, 2011 | NEC AccuSync LCD5V-bk (Black) 15 in. Flat...

1 Answer

I have a nec LCD2070nx Power light is on


Hi:
Your monitor has a problem on its inverter board. It is an electronic component failure, and often it cost's more to fix it than to buy a new LCD monitor .

Nov 23, 2009 | NEC AccuSync LCD71VM 17" LCD Monitor

1 Answer

Help me please


Try this link, I am asumming you have the AccuSync LCD71VM monitor, I don't know what a n4 ibfgl is. But here is a link to nec that might help you...
http://www.necdisplay.com/SupportCenter/DriverFinder/

Download the file NEC LCD MONITOR Installer.
Hope this helped you..THK

Nov 24, 2008 | NEC AccuSync LCD71VM 17" LCD Monitor

1 Answer

NEC flat screen monitor reset screen keeps popping up.


Call 800 836 0655 and ask for directions from tech support.

Nov 14, 2008 | NEC AccuSync LCD71VM 17" LCD Monitor

1 Answer

No picture; power LED blinking amber/green 2-2-2-2...


You can TRY to look for cold solder at the board esp popwer section.

Apr 24, 2008 | NEC AccuSync 120 (White) 21" CRT Monitor

1 Answer

NEC fs 5197 tv blank screen


I cannot assist but do you please have an owners manual for the FS 5197. I'm not sure if its against this sites "rules" but little fingers have tuned the menu's instructions into Arabic. Contact me directly at factotum.inter.alia@gmail.com. Thanks

Feb 10, 2008 | NEC-Mitsubishi AccuSync LCD72V 17" LCD...

3 Answers

NEC Monitor LCD1700V


I had a similar problem with a NEC LCD1935, and I traced it to the inverter board which was a Lien Chang LI-2190 ... it seems that common problems with this type of board are bad solder joints due to the temp. cycling, or blown capacitors, but I was too lazy to resolder everything so I just disconnected the BL signal line that goes between the main board and the inverter board, and this solved the problem. In my display it was a green line, marked BL on the inverter board -- I removed it from the connector and just taped it off.  I'm guessing that this is a blanking signal that the invertor uses to signal to the main board there is an overcurrent situation and that the display should be blanked/shutdown.
I'm certain that there are still problems with the inverter and it might go again, but at least I have a working monitor for the time being.
Caveat emptor.

Oct 26, 2007 | NEC AccuSync LCD71VM 17" LCD Monitor

Not finding what you are looking for?
HP vs15 15"LCD Flat Panel Monitor Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...