Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

Power shuts off periodically

Power just shuts off. Sometime it stays on for hours, other times it won't stay on and must be turned on and off several times. Is there a simple solution?

Posted by on

  • Msuss May 26, 2008

    I have the same exact problem however now the picture does not even come on. I have a repair guy coming this week and could cost me. If someone has a solution please advise.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

Symptom: Intermittent shut off
Cause: Turn off program timer and video input sensor. redress cabling from front control panel away from blue crt-yoke-HV lead

Posted on Jun 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mitsubishi Medallion tv stays on for about 10 minutes and then shuts down and won't turn back on until a period of time has passed. It is a rear projection tv about 9 years old. Can anyone help ex


When it shuts off and the green power light goes off, press both the menu and input buttons on the front of the set (not the remote) and hold both for about five seconds and release.

Power light will blink a two digit error code like 2 blinks and then 3 blinks and repeat it several times.

What is the error code?

Nov 14, 2011 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

I have SAMSUNG HL-S5087W that sometime shuts off several times a night. And sometimes not at all. Heard there is specific part that is not very hard to change. Any help out there?


Yes,it is the tv projection lamp.When it is shutting down several times.The LED "LAMP" light indication flashes or stay on.That the indication the projection lamp life are ending or near the end.Require a new tv projection lamp.

Dec 04, 2010 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

KDF-50E2000 TV stays on for several hours but after being on for extended periods of time the Power LED flashes a series of 3 blinks. I read somewhere that it was a code for Voltage overprotection....


orcording to service manual a blink of 3 indicates a loose lamp door or a inproperly seated lamp....have you recently replace the lamp? and this cound also mean the lamp is begining to fail. reseat the lamp and check the door. make sure the air vents are cleared

Oct 09, 2010 | Sony KDF-50E2000 50" HDTV

1 Answer

My tv looks fine than sometime it will just shut off, and I will have to wait to turn it back on and it my stay on for 2 day and not shut off


Samsung HL-R6167w standby light blink do not power up sometime it would come on and work then it shut down the fan spin with a noise when press remote the green power light flashes.

Jul 21, 2010 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Pioneer SD-P62A3 62" shuts off - won't stay on


If this TV turns back only when it is cooled down than it has cold solder joints tha have to be resolderd.

Jul 07, 2009 | Mitsubishi VS-6055 60" Rear Projection...

1 Answer

Tv comes on then just shuts off will turn right back on


hello it sound like theres may be a dry joint probably in the power supply you would need a strong light and a magnifying glass and soldering iron and some solder

shaun

Apr 08, 2009 | Hitachi 50GX49B 50" Rear Projection...

1 Answer

Samsung TV will turn on and off several times, then stay on.


First, need to check the power bar(if you use).
then. if don't use power bar, need to check the power board.

Dec 12, 2008 | Samsung HL-R7178W 71" HDTV

1 Answer

PRO 510HD PROBLEMS


if you know anything about the tv, take off the back and remove the power supply board. Reflow or resolder the solder points, takes like 2 hours, but is well worth it as my tv works fine now. make sure to use rosin core solder and good luck

Sep 11, 2008 | Pioneer PRO-510HD 53" Rear Projection...

1 Answer

Tv keeps turning off


If it's staying on for just a short period of time it sounds like there is a sensor that is giving the unit a faulty condition (Perhaps for reason or due to a fault in the sensor). There are normally a few temp sensors in the TV around the Lamp and Ballast. They may be bad, or the lamp or ballast is just generating too much heat.

Feb 05, 2007 | Panasonic PT-45LC12 45" Rear Projection...

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...