Television Locked. Hello, My problem is that I spilled some water on my Durabrand Television Remote Control and when I went to press volume up on the flicker the television is now in a Locked setting showing a red lock on my my screen with a background all in blue. I dont have the directions for programming my television or remote control. My Television is Durabrand, Digital Sound, and the model number of my remote control is 5V57-1. I'd appreciate any help you can give me. Clint Corbett

Aiwa television comes with the option of blocking certain channels from viewing, allowing you to control which channels people using the television can view. However, if you forget the code that you entered to block the channels, you might find yourself unable to watch those channels. Fortunately, there are a couple of buttons on the television and the remote that you can press to reset the PIN and customer ID numbers, which unblocks the channels.

Turn the television on.

Press the "Volume Down" button on the front of the TV and press the "7" button on the remote at the same time.

Enter in a new PIN code and new customer ID.

Hello can you please post the brand and model of the television so we can find unlocking instructions.

Hello
You can't unlock the V-Chip setting without entering into its service mode. This is actually a skilled work, and cannot be done without its remote control. If you have the remote control, entering into the s

This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter the Service Mode, press both set key and remote control key for more than 1 second.
Then set volume to minimum and press "0" digit on the remote control to unlock V-Chip and to set a new password.
From this proceedings, you can know that, without its original remote control, the set cannot be unlocked. Try to get it from the nearest Duraband authorised service center or from any electronic spare part shops at your town. OK.
ervice mode do the following>

GO to All TV Service Menu Code to browse olmost tv factory mode.
You can find lot of service code for tvs, DVDs, Monitor and many more.

I like the One-for-All brand universal remotes, but didn't find a code for Durabrand TVs, so I went to Sony's site and found this for one of theirs I also have, the RM-V310. Click the link below to see what they look like--of course, they're the best for all Sony equipment, but I haven't found too many things they won't operate, and if you look at the drop-down menu for TVs, you'll see like I did, that Durabrand is listed there, and I'd trust that from Sony with this remote any day. >>CLICK HERE

Hi, my name is Cheri Torres with DISH Network CustomerService. We do have a few codes that you can try in order to get your DISHremote to control your Durabrand TV functions. I will list here for youour best codes for our most popular remotes and also the instructions foraddressing your remote to your TV. You will be able to find the model number ofyour remote on the back of the remote at the top. For the 3.0, 3.1, 3.2 and 3.4IR remotes the best codes for Durabrand TVs are 220 and 233. For the 5.0, 5.2,5.3, 5.4 and 20.0 IR remotes the codes are 220, 221and 523. For the 4.0, 4.4,6.0, 6.2, 6.3, 6.4 and 21.0 IR/UHF remotes the best codes are 233, 220 and 720.I hope you find these codes and instructions useful and if you have any furtherquestions or concerns feel free to email me at Cheri.Torres@Dishnetwork.com. :)

Instructions for addressing remote to TV

1. Turn the Television On.
2. Press and Hold the TV Mode button until all the other mode lights (i.e. AUX, SAT etc.) light up.
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button. Note: The LED will flash three times.
5. Test functionality with the TV
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

then 0178 is not the right code if the light blinks twice try code search turn the tv on press tv then hold setup till it blinks twice then point the remote at the tv then press the power button repeatedly till the tv turns off then press the tv button again

Mitsubishi WS-65511 volume control went crazy after a storm. Now we don't having any volume. None of the controls are working on the front of the panel with the exception of the device control.

I seem to be the only person on the net with the 3 digit Durabrand universal remote code which works for 13' and up Durabrand TV's and TV/DVD TV/VCR combos. The culprit is 3 digit code 189 for a Funai and Emerson. I only know this because I have like 4 of these TV's haha.

Ron
Smellycircuits@aol.com