Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

No power to my WF 860P front loader washing machine

When the power is turned on at the plug the control panel lights up for a fraction of a second and then goes out again. No problems with the power to the machine and have checked connections and circuit board (for blows)inside the machine.

Posted by on

  • 4 more comments 
  • Anonymous May 24, 2008

    Exactly the same problem

  • emmachiset May 24, 2008

    I have exactly the same problem.

  • essan128 May 31, 2008

    Although the problem fixed itself I think the control board can be temperamental. I had a new one fitted only one month after we bought the machine. I moved to Thailand and shipped the machine from England and I am worried about getting spare parts. Thanks for the advice, I shall remember in case it happens again.

  • lloydwaller Jun 08, 2008

    i know i have a bad control board but need to know where on the machine it is located and how difficult it is to replace

  • lloydwaller May 11, 2010

    could you please advise as to where i can source a new control board for my hotpoint wf 860 washing machine many thanks

  • Anonymous Mar 24, 2014

    Circuit board was repaired I reinstated fixed circuit board but no
    thing happens there is a five pin output reset switch to an external

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

You have a bad control board,it is the first thing to replace.Whats probably causing it to fail is the off balance tub sensors.

Posted on May 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All the lights are flashing rapidly on the front panel of my hotpoint wf 321 wm


Hopefully, you can unplug the machine, wait 10 seconds and plug it back in and it will clear the fault. Best of luck

Mar 20, 2010 | Washing Machines

1 Answer

Maytag front loader washer, control lock light is on. how do i turn it off?


You have to hold down the lock button on the control panel for 3or 4 seconds it should turn off

Sep 12, 2009 | Maytag EPIC MFW9700S Front Load Washer

2 Answers

Control locked light come on and stay on, machine not running


take a good look and read on your control panel i don't remember which button you need to hold for 3 or 5 second to lock unlock control panel. it is also called child lock system.

May 21, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...

2 Answers

Control locked light is on, machine is currently inoperable.


Push and hold the end of cycle button for 3 sec to lock or unlock control panel. here is the manual if you need.

http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0606218.pdf

Good luck and please rate FixYa!

Apr 13, 2009 | Washing Machines

1 Answer

Whirlpool front loader not working - Control Lock Light On


Press the End of Cycle Signal for 3 seconds until the Control Locked light turns off.

Apr 05, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Reset whirlpool front loader


Power shd be on. Right side of control panel, "end of cycle", hold this down for 3 seconds.

Mar 21, 2009 | Whirlpool Washing Machines

2 Answers

Hotpoint Ultima WF865


i have a wf 860p hotpoint washing machine and it has come up with an error code of f 08 can you tell what this error is and how i can fix it.

many thanks

lynette

Oct 21, 2008 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Front Loader - whirlpool - does not star


machine controls may be locked. Power on the unit and hold in the far right button for 4 seconds and then try to select settings and cycles

Apr 08, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Unlock the control panel to a kenmore elite front loader


to unlock the controls
select and hold drain/spin for 3 seconds until the control locked status lights turn off.

Nov 22, 2007 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...