How do I program a frequency into my Bearcat BC895XLT scanner

Trying to program codes in old scanner - The RadioReference.com Forums

forums.radioreference.com > ... > New User / Getting Started Forum

Jun 1, 2009 - 4 posts
I have an old Uniden Bearcat model:bc60xlt-1. I just created an account on radioreference and hopefully you guys can help me out, the ... uniden barcat bc60xlt
7 posts
Mar 17, 2013
The Betty Bearcat starter frequency guide?
3 posts
Feb 22, 2009
Analog Police/Fire Frequencies
9 posts
Sep 14, 2007
Uniden Bearcat BC60XLT-1
10 posts
Dec 18, 2004
More results from forums.radioreference.com

UNIDEN BC60XLT-1 USER MANUAL Pdf Download.

www.manualslib.com > Brands > Uniden Manuals > Radio > BC60XLT-1

this might help
How to Program Bearcat BC 145XL eHow

If you're looking for a manual, you may download a copy here. If you have a question about the BC895XLT, you have to ask it before someone can answer it.

If you're looking for a manual, you may download a copy here. If you have a question about the BC895XLT, you have to ask it before someone can answer it.

• Here is your manual http://minus.com/mTjJfg4li

• Hope this helps.

Regards, Tony

You didn't mention what frequencies you're trying to program. BC148XLT coverage ends at 512 MHz, so you will get the error message if you try to program anything above that. Also, you must be sure to include the decimal point when programming a frequency into the scanner. I hope this helps.

Need the manual for your scanner? You can download/print it here:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC148XLT%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

To program a known frequency into your scanner:

- With power ON, press MANUAL to stop scanning.
- Enter the number of the channel that you wish to program (01 - 30).
- Press MANUAL.
- Enter the frequency, including decimal point (for example, 156.065).
- Press E to enter/store the frequency into memory.
- Press MANUAL to advance to the next channel for programming.

For more information, you can download/print the manual for your scanner here:

http://www.uniden.com/pdf/BC244CLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B

I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:

1. Press the MANUAL key to advance to the channel that you wish to reprogram.

2. Enter the new frequency, including decimal point.

3. Press the ENTER or E key.

4. Start over with step one to continue programming channels.

how do I program bc60xlt handheld scanner

I'am having a problem. I do not have codes for a uniden bearcat 145 xl 16 channel, can someone help me please?