Question about Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

1 Answer

Is there an automatic shut off

I have a Kenmore model 630.1630\630.1730. For some reazon de unit do not shut down the light by it self when it has finish washing. The light still on. I was specting that the light should shut off total but it doesn't. Until i press the on/off bottom at the end of the cycle. There is not an automatic shut off? with this unit.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

It may be when you open the door .That is what the competitors have so that you know it's finished.When you open the door it shuts the light.........on most brands. PLEASE RATE THIS !!!!!
Thank YOU !!

Posted on Jun 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher will not start lights blinking


remove drain hose off garbage disposal and see if its plugged with food debris,if it is the unit will act like this as the computer will sense this blockage and shut down until cleared of this obstruction

May 12, 2012 | Kenmore Dishwashers

2 Answers

Kenmore Ultra Wash Dishwasher, model 665.15812, "locked" light stays on. Pressing and holding "no heat dry" does not cancel "locked" condition, neither does unplugging unit.


Hello Everyone,

Flashing Lock Button...tried pressing every button in every sort of sequence you can think of? Well try this!

After washing dishes by hand for a few weeks while I tried every solution I could find on the internet, I finally got my Kenmore 665.15812 Dishwasher to work! I found this post: http://www.applianceblog.com/mainforums/sears-kenmore/10277-kenmore-dishwasher-model-66515632000-flashing-air-dry.html

At the bottom Martee says that he jiggled the ribbon wire that is connected to the board (looks kind of like an IDE cable you'd find in a PC). I took off the inside pannel and the black box protecting the circuits. I jiggled the ribbon wire, and sure enough, I felt a click, shut the door, and everything was back to normal! HURRAY!

Hope this works for you!9_22_2012_4_15_08_pm.jpg

Dec 23, 2010 | Kenmore Dishwashers

1 Answer

MY DISHWASHER HAS NO WATER GOING IN TO THE UNIT IT HAS HAD THE FILTERS CLEANED AND ALL OF THE SPRAY ARMS CLEANED REALLY GOOD DISCONNECTED THE WATER SUPPLY AND FOUND OUT IT HAS A LOT OF PRESSURE JUST...


Hello there
yes i have a pretty good idea i think your problem is that your water solonoid valve has failed and is shut when these solonoid valves fail they automatically shut resulting in no water flow
I recommend that you turn off all the power to the unit and unplug the power to the unit then pull the unit out and follow the water suply line up the unit and you will see the solonoid valve
here you have 2 choices you can either manually open the valve by opening the case on the solonoid valve and removing the internals of the unit or you can just replace the valve itself cost about 40 dollars depending on the exact model of the unit ok
I hope that this has helped you out
best regards michael

Nov 14, 2009 | Kenmore Dishwashers

1 Answer

Have Kenmore ultra wash model 665.1604, purchased in 2004. no problems until yesterday. Push start button after selected wash cycle/drying options. Cycle does not start, and start button just keeps...


unplug the unit for 1 min then plug back in then test unit pcb controller should reboot its self. if this fails you'll need to send the complete model # on the inside of tub area

Aug 31, 2009 | Kenmore Dishwashers

1 Answer

Kenmore Ultrawash Quiet guard 3; can't get the clean light to turn off to be able to start cycle


Try pressing normalwash-heatdry-normalwash-heatdry-normalwash-heatdry-normalwash-heat then all the lights come on.
Let run for a little bit. then keep pressing the start button... until the unit shuts off, then try running a cycle.
The control board has a memory in it. So if you have cold water running in it one time. It will take longer to warm up. Your memory in the control board says its taking to long to warm up. Shutting down thinking there is something wrong with your heating cycle.

Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.

Aug 01, 2009 | Kenmore Dishwashers

1 Answer

My Kenmore Dishwasher will not drain.


Some of the energy star models have a p poor motor with plastic pumps parts. The pump reverses direction to pump out the drain water but get in a bind and the motor shuts down. These units should be recalled.

May 10, 2009 | Dishwashers

2 Answers

Which dishwashere auto resume wash cycle when door is closed?


All the tall tub dishwashers made by Whirlpool (inc. Kenmore and Kithcenaid) must have the start button pressed after adding a dish. If the start button control light is blinking, you must press start. On those models with buttons on the top of the door you must, in addition, close the door within aprox 5 seconds after pushing start. Hope this helps. Ken

May 01, 2009 | KitchenAid Dishwashers

1 Answer

"Lock-on" light flashing


heated dry and normal toggle untill all lights light up then turn unit off. try that

Jan 02, 2009 | Kenmore 15899 Built-in Dishwasher

1 Answer

Kenmore 74362


The blinking buttons indicate the buttons are bad. The console will have to be replaced.

May 14, 2007 | Kenmore 16919 Built-in Dishwasher

Not finding what you are looking for?
Kenmore 16602 / 16604 / 16609 Built-in Dishwasher Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Fred Sops

Level 2 Expert

271 Answers

D. E. Hev

Level 3 Expert

1132 Answers

Raisin Brann

Level 1 Expert

28 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...