Question about Jensen MSR4050G CD Player

1 Answer

Jensen MSR4050G Sirius Ready marine radio

I need to get into sirius mode to get the S.I.D. number to get the radio activated?

Posted by on

  • danakel0303 Aug 04, 2008

    I have the same problem. Very misleading when you buy a radio that has a feature of Sirius Satellite . You automaticly think all you need to do is call Sirius and activate your satellite. Not true in this case. On the Box you should have a message that states in order to work you need to buy another antenna and a tuner to work. I really do feel this is miss repersenting the product. When you buy a car and it states Satellite ready all you need to do is activate the product with sirius or XM Radio.

×

1 Answer

I had the same problem and there are a couple of reason why you may not be able to get into Sirius Mode.

  1. You have the wrong type of antenna (it must be a Sirius approved antenna)
  2. You may not have installed the tuner (most Sirius ready units need require that you have a tuner hooked up to your unit to get satellite reception. The tuners are specific to your unit, so make sure you but the correct one. This is quite sneaky on Sirius’ part…but good luck).

Posted on Jun 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to see Sirius number on radio


Once you change the radio to Sirius, change the channel to channel 0 (zero). It should show the Radio ID on the screen.

Apr 25, 2014 | JBL MR-17 Sirius-Ready AM/FM/CD Receiver...

1 Answer

Jensen MSR4050G Sirius Ready marine radio


Sirius Mode Selection
While in Sirius satellite radio mode, press S-MOD (22a) (also the SHIFT/SCAN button) to select
from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the
Category or Set Skip Channel modes are selected, the corresponding icon appears in the display.
When the DIrect Tune mode is activated, the alphanumeric display appears.

Click on this link to get the user manual:

http://www.asaelectronics.com/techpdf/MSR4050G%20Owners%20Manual%207-11-05.pdf


good luck...

May 19, 2008 | Jensen MSR4050G CD Player

1 Answer

How do I display the radio ID number, so that I can listen to Satellite radio?


Verify if the radio is "Satellite ready" or if it comes with the remote tuner unit. I believe you have to buy a separate tuner add-on and antenna in order to activate the satellite circuitry - THEN it will show you a radio ID. I think ONLY the Alpine comes with the tuner. I would call Crutchfield and they can tell you what all you need with that tuner to make it work with the satellite radio.

Jan 14, 2012 | Panasonic CQ-DF783U CD Player

1 Answer

How do i find the sirius id on the panasonic cq-hr1003u?


The radio does not have a Sirius ID - it is not built in. THe CQ-HR1003u is Sirius READY - meaning... The CQ-HR1003U can control an optional Sirius Satellite Radio tuner by Panasonic (item #133SRT100).

In addition to the Sirius tuner, you will need an antenna and subscription in order to receive Sirius Satellite Radio programming.

Thanks!

Sep 27, 2011 | Panasonic CQ-HR1003U CD Player

1 Answer

I have a sirius ready cd player installed in my jeep. I was wondering how I get sirius radio..when you scroll through Cd,radio, aux , there is sirius so i dont think i need another radio...but i dont know...


Looking at the user manual on page 13, you have to purchase and connect the XMD1000 module to in order to get the satellite radio service. If the module is installed, you'll get a display telling you to sign up for service.

Feb 24, 2010 | Panasonic CQ-C7301U CD Player

1 Answer

Our new motorhome came with a sirius ready Jensen vr187 radio-how do we hook up to Sirius, and does it need an antenna, or is that part of ''sirius ready''?


Sirius Ready means that there is another piece the company makes that is for sale seperately from the reciever. you need to get the whole sirius system and it will just plug in and play through your existing setup.

Nov 18, 2009 | Jensen Car Audio Receivers

1 Answer

Radio needs to be reset, I have no code.


Unfortunately KENWOOD codes are not available for free from anywhere on the Internet.

Try your local Radio Decoding Service or Car Radio / Audio Store ...who will connect it to a laptop and read/recode the memory chip (EEPROM)

Sep 06, 2009 | Kenwood Marine Receivr/Speaker CD/MP3/WMA...

1 Answer

Want sirius on this


CLICK HERE for your owners manual

Your radio is already Satellite READY - all you need is the Sirius Tuner/antenna.

8af1bb8.jpg

The model # is KTC-SR901/902

eBay Auction #1
eBay Auction #2

This is a subscription service - so that is required as well to activate the radio.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Jun 11, 2009 | Kenwood Sirius KDC-MP425 CD Player

2 Answers

I have a JBL MR-17.2 Sirius Ready stereo


To get your Sirius ID number from you MR-17 JBL stereo, select the Mode button until it displays "Sirius". Then push and hold the Mode button for a couple seconds and it will chirp and display 3 blank spaces. Enter three zeros, "000" in these 3 spaces. The Zero is the loud button labeled "LD". When you do that, it will display your Sirius ID number. :)

May 13, 2009 | JBL MR-17 Sirius-Ready AM/FM/CD Receiver...

2 Answers

Sirius Activations on VR 185 Jensen Radio


The user's manual containing the instructions can be downloaded here
http://www.asaelectronics.com/techpdf/VR185%20Owners%20Manual%2011-6-06.pdf

Thank you.

Aug 29, 2008 | Car Audio Receivers

Not finding what you are looking for?
Car Audio Receivers Logo

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio Receivers Experts

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Are you a Jensen Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...