Question about Jensen MSR4050G CD Player

Open Question

Getting into sirius mode to get the S.I.D. number

Want to activate my sirius ready deck, but i cant get the deck into sirius mode using the mode button like the manual says to get the S.I.D. number i need?Help Please

Posted by on

4 Suggested Answers

SOURCE: Jensen MSR4050G Sirius Ready marine radio

I had the same problem and there are a couple of reason why you may not be able to get into Sirius Mode.

  1. You have the wrong type of antenna (it must be a Sirius approved antenna)
  2. You may not have installed the tuner (most Sirius ready units need require that you have a tuner hooked up to your unit to get satellite reception. The tuners are specific to your unit, so make sure you but the correct one. This is quite sneaky on Sirius’ part…but good luck).

Posted on Jun 25, 2008

SOURCE: sirius activation

ESN number is on the box, its a 12 digit number. Tune receiver to 184 and call Sirius 800 number for activation.

Posted on Jul 16, 2008

marinos
  • 114 Answers

SOURCE: Sirius Activations on VR 185 Jensen Radio

The user's manual containing the instructions can be downloaded here
http://www.asaelectronics.com/techpdf/VR185%20Owners%20Manual%2011-6-06.pdf

Thank you.

Posted on Aug 29, 2008

  • 1 Answer

SOURCE: I have a JBL MR-17.2 Sirius Ready stereo

If you have a Sirius satelite receiver box, the Sirius ID number will be on it ir the package it came in. The reciever is seperate form the MR-17.2 and is usually a JBL SIR2.5.

Posted on Jul 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jensen MSR4050G Sirius Ready marine radio


Sirius Mode Selection
While in Sirius satellite radio mode, press S-MOD (22a) (also the SHIFT/SCAN button) to select
from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the
Category or Set Skip Channel modes are selected, the corresponding icon appears in the display.
When the DIrect Tune mode is activated, the alphanumeric display appears.

Click on this link to get the user manual:

http://www.asaelectronics.com/techpdf/MSR4050G%20Owners%20Manual%207-11-05.pdf


good luck...

May 19, 2008 | Jensen MSR4050G CD Player

1 Answer

Sirius Radio ID.. Where???


Youll have to call up sirius radio and get them to give you the number. Only if you have an account and service with them tho.

Feb 06, 2010 | 2008 Nissan Armada

2 Answers

I have a JBL MR-17.2 Sirius Ready stereo


To get your Sirius ID number from you MR-17 JBL stereo, select the Mode button until it displays "Sirius". Then push and hold the Mode button for a couple seconds and it will chirp and display 3 blank spaces. Enter three zeros, "000" in these 3 spaces. The Zero is the loud button labeled "LD". When you do that, it will display your Sirius ID number. :)

May 13, 2009 | JBL MR-17 Sirius-Ready AM/FM/CD Receiver...

2 Answers

Sirius Radio Invalid Channel message


1) Do you have a Sirius account?

2) Have you called Sirius and given the serial number of that receiver?

Those are the first two things you have to do to get a Sirius receiver working. (The original owner could have changed his account to use his new receiver, if he has one.) Go to http://www.sirius.com/install - the "activate" part - for details.

Aug 20, 2008 | Clarion (NAVSIR) SIRIUS Radio Receiver

1 Answer

Sirius activation


ESN number is on the box, its a 12 digit number. Tune receiver to 184 and call Sirius 800 number for activation.

Jun 01, 2008 | Kenwood KDC-319 CD Player

1 Answer

Satellite Radio


 Yes, but it will require a tuner adapter so that your deck will properly recognize XM. However for my deck I noticed that "Sirius" will still be displayed as the satilite provider on the display menu. Confusing but don't cause much concern.

May 22, 2008 | Car Audio & Video

1 Answer

Jensen MSR4050G Sirius Ready marine radio


I had the same problem and there are a couple of reason why you may not be able to get into Sirius Mode.

  1. You have the wrong type of antenna (it must be a Sirius approved antenna)
  2. You may not have installed the tuner (most Sirius ready units need require that you have a tuner hooked up to your unit to get satellite reception. The tuners are specific to your unit, so make sure you but the correct one. This is quite sneaky on Sirius’ part…but good luck).

May 19, 2008 | Jensen MSR4050G CD Player

1 Answer

Question about sirius radio for kenwood cd player


You can try it, but I think you might need a media expander/controller. I see some going for around $100 on Ebay. It allows you to add and interface many component to your deck. But make sure the deck ready to control it. You can tell by the label on the deck(Ipod ready, XM ready, Sirius ready, Changer ready....ect). Goodluck.

May 09, 2008 | Kenwood KVT-717DVD Car DVD Player

2 Answers

JVC KD-AVX1 Sirius Just Quit


Hi guys i need help i bought a use KD-AVX1 and i don't know how to use it i need help how to get a manual for my radios appresiated your help.

Apr 29, 2007 | JVC KD-AVX1 Car DVD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Jensen Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...