Question about PfaFF Creative 7570

1 Answer

PLEASE HELP!!! Pfaff creative 7570 tension problems

I am using the Pfaff to embroider letters and the tension just wont work! The tread im using is a rayon and is quite fine. Besides the dial on the left hand side is there anything I can try???
I am going crazy trying to get it to work - the thread is either way too tight (on about 3) or its loose. When I adjust it using the side dial it seems to take a while before it goes to the new tension setting -( If I have it on 1 and move it to 2 it still runs loose for a few letters before it gets tighter) - I hope I am making sense!
Any suggestions greatly appreciated!!!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 8 Answers

Check your bobbin tension also. Embroidery bobbin thread is finer than sewing thread and you may need to make adjustment on the bobbing case by turning the small screw slightly. The type of stabilizer can affect your embroidery. An excellent reference for machine embroidery is Embroidery Machine Essentials by Jeanine Twigg, available on Amazon.

Posted on May 20, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What format does the Pfaff 7570 use for embroidery?


The format that is used by the 7570 and the 7560 is *.pcs or *.dst. Either one will work provided that the designs are within the confines of the hoop. The largest size design that would be embroidered by this machine would be 115 x 120 MM.

Jan 03, 2013 | PfaFF Creative 7570

1 Answer

When embroidering with my 7570, the upper thread comes loose, resulting in a birds' nest under the hoop--help!


generalmente se introduce algo de material o restos de hilo, entre los platillos de tension y no permiten apretar el hilo, por lo que pasa suelto. Al pasar sin suficiente tension ,el hilo de abajo,que tiene mas tension lo arrastra y lo amontona bajo la tela.-
Se debe sacar tensor completo y limpiar, al momento de esto, se debe revisar el muelle de tension( resorte) que es una pieza de desgaste

Oct 18, 2010 | PfaFF Creative 7570

1 Answer

PFAFF 7570 User Manual


The only one I found is $40. http://www.sewingstyle.com/pfaff-7570.html You may be able to contact the site for additional information.

I think I would speak with a Pfaff dealer for information before spending this much for a manual.

Apr 27, 2010 | PfaFF Creative 7570

1 Answer

On what number should I put 7570 tention when


Refer to the manual. If you do not have a manual, start at 4 and work your way through the numbers, bit by bit until you get good results.

The bobbin thread should pull the top thread slightly under and to the back.

Machine embroidery bobbin thread is heavier than the standard size machine embroidery top thread and this also helps to pull the top thread to the back.

Mar 07, 2010 | PfaFF Creative 7570

2 Answers

I cant set the tension on my PFAFF 7570 the thread keeps


First make sure your needle is in correctly. Then make sure you are threading the machine correctly especially make sure you thread the take-up lever. Make sure your tension dial is at a 4 to 5. if this does not work, let me know

Oct 19, 2009 | PfaFF Creative 7570

1 Answer

I have a Pfaff 7570 and I would like to adjust the thread tension. Most of the time when embroidering it is set at 1 or 0...and never higher than 3-4. Also I can't get the light bulb end out. it broke...


Lift top cover. remove top cover (flat springs on each end of cover - move one with your finger and top will come off. Lift handle. Look to right of handle end over the head. There is a screw there. LOOSEN screw and front cover will slide away from head. Bunch up a paper towel or napkin and press into broken bulb socket and turn same counter clockwise to get bulb socket out. Good Luck!

Jul 01, 2009 | PfaFF Creative 7570

1 Answer

Circuit board


Its a long shot, but qualitysewing.com may be able to help you.

good luck!

Jan 13, 2009 | PfaFF Creative 7570

1 Answer

Pressure foot problem


hi there not sure if the manual will help but if you go to this link you might find it.
pfaff 7570 manual Google Search
or go to this link might help you to find out why.
pfaff 7570 presser foot wont go down Google Search

Nov 04, 2017 | PfaFF Creative 7570

1 Answer

Bobbin tension


Check also this links, hope they can help you:

Pfaff 1475 7570 7560 FAQ
threading a pfaff creative 7570

Aug 10, 2008 | PfaFF Creative 7570

Not finding what you are looking for?
Sewing Machines Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top PfaFF Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

191 Answers

Irene Tulloch

Level 2 Expert

472 Answers

Are you a PfaFF Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...