Can't use my old printer

1. turn your machine few times by hand
2. mix your machine oil half and half with mineral turp, use that on all oil points, this will soften and help remove all hardened old oil,
3. run machine on few stitches on old rags to get rid of old oil
4. re-grease with your machine oil, run again and use normally.
5. re-grease machine on all points daily for next week or so and then, depending on the load monthly is fine

this should solve your greasing problem :-)

if you find this little info helpful - do not forget to vote...

Does it actually FEEL hot when it shuts down? Ther could be dust bunnies inside it.

http://www.retrevo.com/support/NAD-C315BEE-Amps-manual/id/8043dj584/t/2/

These things only have so many protection cycles in their lives. If you can't find a cause for the thermal shut-down and resolve it you should take it to a tech for a check-up.

Hi,

You can download the software from manufacturer's support website by clicking this link

On the page which opens, select the operating system of your computer (Windows XP/ Vista..) from the drop-down menu (See attached image).

Then download the required drivers and software

Please note: The list of available software and drivers will load only after selecting the operating system of the computer.

Hope this solves your problem. Thanks for using FixYa.

That could be from the rubber rollers not being able to grip the paper. They get polished or shiney over time with use and age. Then they slip or pull incorrectly and you get your problems. There are other things that can cause this but nothing worth fixing.

Fixing the rubber rollers is easy. You need some ispropyl rubbing alcohol and a paper towel. Make sure it is isopropyl type as this won;t attack other parts. Simpley wet the paper towel and wipe down the rubber rollers. You will see the rubber go from a dull shine to dull flat rubber. This takes off the buildup on the rubber and lets it grip again. Eventually the rubber will age harden and this trick won;t work but this can give you years more service.

if the hum is in the sound output you have a blown power regulator

The problem here might be the cartridge. You need to replace it.

Go out to hp.com support and click on downloads and see if they have an updated download for vista on your machine.

Your PC has VISTA loaded (according to the HP web specs)

This printer has no specific driver for VISTA but basic functionality is supported by VISTA without the need to load a seperate driver.

refer HERE

The printer connects via a USB cable to the PC and should be detected automatically by VISTA whe the printer is turned on.

The original CD would have drivers for an earlier vesrion of windows (98 or XP) so you should uninstall any programs that were installed offthe disk.

Post back results or further questions for more assistance

vista can not work on those older systems. change it to xp-os, then re-load the printer driver software.

We could fight with your old one and try to get vista to see it, but your not a computer person HP dont support it and i think that road may just lead to more frustration for you so maybe best if we just get you to replace it, any new printer of any brand on market should be vista compatable.

Double check specifics on HP officejet 4315 all in one and it is compatable, as I would say is any new printer on the market.

1:46PM 12/31 in my world, well 31/12 actually, and my computer says your 12/30 post was done on the 31/12, so no idea if it is before 10am:-)

info
http://labs.pcw.co.uk/2007/01/how_to_solve_vi.html

more info technical info----> more more and more more more

non tec info---->and my more info