Upon pressing Y=, I enter a function such as Y1=X^2

When pressing GRAPH the Dim Mismatch error will be displayed.

Thanks in advance for helping me to resolve this.

Matilda

matildaveiczer@hotmail.com

Hello matilda. The Y is your vertical & X is horzonial. With TI-83PULSE you should aquire a 'V' on the graph with point of V at center cross with Y=X^2. You can't aquire a Y=Y1+X^2

Posted on Oct 09, 2008

Your TI-84 Plus displays the ERR:DIM MISMATCH error if you are trying to perform an operation that references one or more lists or matrices whose dimensions do not match.

For example, multiplying L1*L2, where L1={1,2,3,4,5} and L2={1,2} produces an**ERR:DIM MISMATCH** error because the number of elements in L1 and L2 do not match

For example, multiplying L1*L2, where L1={1,2,3,4,5} and L2={1,2} produces an

Nov 29, 2012 | Texas Instruments TI-84 Plus Silver...

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Jun 08, 2012 | Texas Instruments TI-84 Plus Calculator

Sep 22, 2011 | Texas Instruments TI-82 Calculator

You're probably trying to graph a function that does not involve stat plot features, while the calculator is trying to. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Feb 01, 2011 | Texas Instruments TI-83 Plus Calculator

You're probably trying to graph a function that does not involve any stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Sep 07, 2010 | Texas Instruments TI-84 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Aug 31, 2010 | Texas Instruments TI-84 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

If this doesn't do it, please post a comment and we'll go on from there.

If this doesn't do it, please post a comment and we'll go on from there.

Aug 17, 2010 | Texas Instruments TI-84 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features..

Jun 18, 2009 | Texas Instruments TI-82 Calculator

That is because you don't have the right amount of points. Either delete one point or add another point. Then try to graph it.

Jan 10, 2009 | Texas Instruments TI-84 Plus Silver...

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Dec 07, 2008 | Texas Instruments TI-83 Plus Calculator

371 people viewed this question

Usually answered in minutes!

×