Question about Intel Motherboard

1 Answer

Need to fix the wairings

I had a problem with my hard disc and i removed all the wires from my coomputer just have it clean but after compleating the job i dont know how to connect the wairings so i need a wiring digram could you please help me

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

If you post the motherboard model number? Desktop or notebook? Sure can try.
Mike

Posted on May 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Non system disc or disc error fix


Hi, do you have a floppy disk, cd or usb stick inserted in your computer? Try removing such items and reboot as it may be trying to read these before the hard drive.
Check the boot order, when you first turn on your computer, access the BIOS menu (may need to push Delete, or one of the function keys eg F2, F8, F12 etc).
Check the boot order to ensure the correct hard drive it listed. Try moving the hard drive to the first option and reboot.
If removing any cd, usb stick etc doesn't help, try removing the hard drive and see if you can access it from another computer. If you can't access it, your operating system nay be corrupt and you may need to reformat.

Jul 28, 2011 | Intel Motherboard

1 Answer

I have a Compaq presario f700 model laptop computer that was working fine until last week now what happens is when I turn it on I get the hp logo on screen long time then it disapears and the screen...


Try to clean the Hard disc connector on your laptop motherboard or Sata controller if you are using sata hard disc. There is loose contact there try to clean it with a piece of paper.

Jul 19, 2011 | Compaq Motherboards

1 Answer

If i un plug the montor on my pc it says check the white blue red wires .if i plug it back in screen gos black


Test all leads that attach to your hard drive including electrical extensions IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them they could be faulty:

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error If your computer came with a motherboard disc the drivers could be on it or you might have a dirty graphics card remove the graphics card and clean the socket
hope this helps

Jul 04, 2011 | Motherboards

1 Answer

Asrock n68pv-gs no display, no beep, power supply is good .. anyone can teach me how to fix this problem please...


a bad lead can do this

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electric extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error If your computer came with a motherboard disc the drivers could be on it or you might have a dirty graphics card remove the graphics card and clean the socket

hope this helps

Apr 30, 2011 | Motherboards

2 Answers

I look for picture of a MS-6714 . I need pictire tom help hookup the on/off wires


There is a PDF of the manual at
http://www.cecs.csulb.edu/~maples/cecs410/Assignments/E6714v1.0.pdf
Which is for the version 1.0 hardware, but it may help know where to hook up connectors.
Snapshot included: remaker_0.png

Apr 17, 2011 | MSI 845GEM-L (MS-6714-020) Motherboard

3 Answers

Game want play keep saying needs cleaning


It's likely the game is too scratched to play or your dvd/cd drive is not working properly and should be replaced. If other games work and this one doesn't, the disc is damaged.

Mar 02, 2011 | Motherboards

1 Answer

Pc running but wont recognize screen I have tried other screens but same result ,replaced video card still nothing on screen what else should I do


remove your memory card and wipe it clean with a clean cloth and insert the memory in the slot dont forget to remove all the addon card ide or sata cable power to hard his and cd drive restart the computer see if the display is ok if not remove the processor fan and the processor clean it with clean cloth and fix the processor to the socket also clean the heat sink and apply a thin layer of heat sink solvent and fix the heat sink tightly to the socket if the display doesnt come change your processor which suits the socket

Dec 15, 2010 | ASUS P5GC-MX/1333 Motherboard

2 Answers

Boot failure Asus P5Q-EM


Disk boot failure. Issue:Disk boot failure.
Cause: This issue could be caused by any of the below possibilities.
  1. Boot options are not set properly in CMOS
  2. Non bootable disc or USB in computer
  3. Remove added hardware /check connections
  4. Hard disk drive is bad
Solution:Boot options are not set properly in CMOS
Verify that the boot options within CMOS are set properly. Below is an example of how we recommend the boot options be set. Additional information about how to enter CMOS can be found on document CH00192.
  1. Floppy drive
  2. CD-ROM drive
  3. Hard Drive
  4. Other / Network
Non-bootable floppy diskette or disc or USB in computer
Verify that there is no floppy diskette or disc in the computer. If the boot options are set improperly the computer could be trying to boot from the disc drive instead of the hard drive.
In addition to verifying there is no disc in the computer make sure that no USB jump drive, external hard disk drive, or memory stick is inside any memory card reader.
If you're wanting to boot from a floppy diskette, CD, DVD, or USB drive and are getting this error message and have verified that your CMOS settings are in the proper order as explained in the above paragraph the diskette or disc you're using is either bad or does not have the proper files on it to make it bootable.
  • Additional information about how to make a boot disk can be found on our boot disk help page.
  • See document CH000669 for information about creating a bootable disc.
Remove added hardware / check connections
If you've recently installed any new hardware it's suggested that it be removed to verify it's not causing this issue. If after the device has been removed the computer works and it was another IDE / EIDE device ensure that the jumpers are properly set on the hard disk drive.
In addition to removing any new hardware it's also suggested if you've recently moved the computer or installed anything inside the computer that the connections for the drive be checked. Usually it's best to simply disconnect the cables from the back of the drive and reconnect them to make sure they're connected properly. While inside also disconnect and reconnect the cable connected to the motherboard as well. While inside your computer make sure you're aware of ESD.
Bad hard disk drive
If you have followed the above steps and you continue to experience the same issue, unfortunately it is likely that the hard disk drive is bad or the controller is bad.
If available, you may want to connect another known good hard disk drive to the computer to determine if it can be detected. If it is able to be detected then replace your hard disk drive. If it is not detected, unfortunately you will need to replace the motherboard or controller as it is bad.
If no additional hard disk drive is available it is recommended that the hard disk drive be replaced first or that the computer be serviced / repaired.

Jul 01, 2009 | ASUS P5QL-EM - Motherboard - micro ATX -...

1 Answer

Switched on pc monitor says no signal? The fans and hard drive are spinning but nothing happens ive tried putting xp disc in but thr drive flashes a couple of times then stops.How can i start my pc or cant...


check the memory card, or the ram?! removed the ram ram from the slot? clean the slot of the ram and clean also the memory card by an eraser?!

check also the video card?!!

Feb 26, 2009 | ASUS P5VD2-MX SE Motherboard

2 Answers

Window currupt


1- the problem is a software problem your board and processor are ok.

2- the message you saw indicates curruption in the windows files its strongly recomended that you install a new copy of windows even if the erors could be recovered..
reformating your hard disk is necessary to reinstall a new coppy of windows.

May 27, 2008 | Intel Motherboard

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...