Question about Pioneer VSX-92TXH Receiver

1 Answer

Component to HDMI

Right now I am using a media center on the HDMI in on the receiver with the HDMI out going to the TV. How could I configure the receiver so that when I hook up an XBOX 360 with component cables I can have it output through the HDMI to the TV as well? Thanks!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

Why dont u connect the xbox directly to the tv via HDMI cable? the output will be fantastic.The component cables just cannot give a better resolution than HDMI.
As for connections,i am not in favour of component and HDMI together.

Posted on May 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hdmi to component connection for surround sound


Does you tv have an optical audio output? That would be the easiest way.

Jan 07, 2013 | Marantz Sr8200 Thx Ex Surround Dolby...

1 Answer

I have just brought a rx-v367 av reciever and have connected it to my tv/ speakers. speakers work fine when testing set up. however there is no sound coming out when connected to tv. also it keeps coming...


Hi, Yamaha audio-video receivers are equipped with a variety of connecting jacks for hooking up different types of electronic equipment. Component AV cables are typically used for hooking up the receiver to a cable TV box. Component cables can also be used to connect the Yamaha receiver to an HDTV, although a High Definition Media Interface (HDMI) cable offers a simpler connection if the receiver is equipped with HDMI (all HDTV sets are equipped with the distinctive, six-sided HDMI jack). The connections should take less than five minutes.

Instructions

Things You'll Need:

* 2 sets component AV cables
* HDMI cable


Check the back of the Yamaha receiver to determine if HDMI is available. The six-sided jack contains 19 holes set in three rows. If the receiver is equipped with an HDMI Out port, use an HDMI cable to connect to the TV by inserting the plug straight into the jack with the wider end turned upward.


Insert the red, green and blue plugs on a set of component AV cables into the Video Out jacks on the cable TV box, matching the plug colors to the jacks.


Connect the plugs on the other end to a set of Video In jacks on the back of the Yamaha receiver. Make a note of which jacks are used for the connection. Each set of jacks is labeled on the receiver.


Insert the audio plugs on the component cables into the Audio Out jacks on the cable box, using the white plug for the left channel and the red plug for the right.


Attach the plugs on the other end to the Audio In jacks on the Yamaha receiver.


Use a second set of component AV cables to connect from the AV Out jacks on the Yamaha to the AV In jacks on the HDTV only if an HDMI cable was not used.

Feb 18, 2011 | Yamaha RXV367 Receiver

1 Answer

Snow on tv cant get bk to pic


Hi nelle_king my name is MikeHouston of DISH Network. There are a couple things we can do to get thatpicture back. What you will need to do is make sure the TV is on channel 3 orthe right input, and if the picture is still snowy and we are on the correctchannel/input you will need to reset the receiver by unplugging it for 10seconds and plugging it back in. After you plug it back in it will power up byitself and you should see the DISH Network screen. I will send the steps tohelp with the setup. b> # Sequentially follow the below steps until problem is resolved or until instructed to skip to another step 1 Verify HDMI Connections Verify HDMI cables are connected from the DISH receiver HDMI Out to the HDMI In of the Revue, and the HDMI Out of the Revue to the HDMI In of the TV. 2 Reset Revue and DISH Receiver Unplug both the Revue and DISH receiver for 10 seconds and plug back in. It may take up to 5 minutes for the reset process to be completed. 3 Check Receiver-to-TV Configuration Check that the wiring between your DISH receiver and your TV is configured properly using http://www.dish.com/wiring. 4 Secure Receiver-to-TV Connections Check that the connections between your DISH receiver, your TV, and any component(s) (VCR, DVD Player, etc.) in between are secure. 5 Bypass Revue Bypass the Revue and directly connect the DISH receiver to the TV using an HDMI cable.





































Feb 02, 2011 | Toshiba Televison & Video

1 Answer

How do I convert from HDMI-in to Component-Out? Basically, I'd like to have my cable box (Comcast DVR) coming into the receiver using HDMI but would like to output to my TV using Component instead of HDMI....


looking at the manual here that should work for Video http://www.onkyousa.com/download/own_manuals.cfm?cat=Receiver
it looks like on the receiver you would have the DVR connected via HDMI cable to the receiver On the receiver you would select this HDMI as the input. That should automatically allow that signal to be presented to the component out on the receiver you connect the cables from component out to the TV and switch the TV to select the component input -depending on the TV model this may be labeled AV1,2,3,4, etc No sound will be transferred to the TV as component is Image ONLY whats the make and model of the TV

Mar 20, 2010 | Onkyo TX-SR606 Receiver

1 Answer

Denon AVR 1610 hdmi to component video conversion missing?


hello i believe your problem is that you are trying to downconvert from hdmi to component connections and Denon receivers will not do that.

I have a 4310 and I know it will UPconvert from an analog signal to HDMI but won't do it the other way around.

you may have to use component inputs for all your equipment. You will also have to go into the receivers menu and designate which signal is being used for each component as it won't auto select between analog and digital signals when it comes to video.

hope that helps

Dec 30, 2009 | Denon AVR-1603 Receiver

1 Answer

What is the correct wiring connection using hdmi and optical cables from a lcd tv to yamaha yht292


If you tv has a hdmi input, connect it to the Yahama receiver hdmi output (out). If you are using a satellite receiver, digital converter, or a cable box with hdmi output(s), connect them to the Yahama hdmi input (in) for video and audio signals. If the above box(es) do not have hdmi capabilities, then connect the box(es) to the Yahama with either component (preferred), svideo, or yellow RCA compsite video jack (least preferred) for the video signal. For audio, connect the box(es) with optical or coax (preferred) or left-right-center-front-rear patch cords.

It really all depends on what outputs are available on the boxes and/or signal source(s).

Hope this helps,

Rhais

Sep 19, 2009 | Yamaha YHT-390 Theater System

1 Answer

Yamaha HRT 6130 cable questions


You would need 1 component and 1 HDMI cable.

Mar 15, 2009 | Yamaha HTR-6130 Receiver

1 Answer

Right cables for connecting devices


Hi,
You have connected from PC to TV right???
1.To get the video you have to connect to TV
2.Please take a separate cables for to listen audio and to watch video,
for audio connect cables from DVD Player to Home Theater you can listen the audio
for video please connect the HDMI video to TV Where You can enjoy both.

Jan 07, 2009 | Audio Players & Recorders

1 Answer

HDMI out to Olevia 527 TV = Blue Screen


Hi beelzyboob.. try checking these.. since you are using the RCA (composite cables) and I assume you have them on the "DVD in" at the back, go to setup, go to input assignment and go to hdmi input. here, make sure dvd is set to" ----". Next, hit return and go down to component input and also check if dvd is set to "-----". With these settings, you should get video. This is because you are not using either an HDMI or component cable. hope this helps.. ^_^

Sep 09, 2008 | Onkyo TX-SR606 Receiver

Not finding what you are looking for?
Pioneer VSX-92TXH Receiver Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

John
John

Level 2 Expert

473 Answers

Dennis McCollum

Level 2 Expert

137 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...