- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hello ,on the bottom of your mouse there is a cover that you remove thats were the 2 aa batteries go. the cover has the wireless info on it you'll see a spot were you can use your finger nail to pop the cover off then after installing your batteries just pop it back on.
Go to the Logitech website. In the support/downloads are you will find the software & drivers you need to install to your computer. You can download the generic logitech wireless driver & then let the new software determine the model. Hope this helps & please remember to rate my answer. Thanks.
Just go to http://www.logitech.com/index.cfm/mice_pointers/mice/&cl=us,en and look for your mouse by model, choose driver that is appropriate for your windows system and download it, install it and follow the directions, then when you plug in the cordless mouse receiver the driver should be installed and it should work with no further need to do anything else..
You probably already done this but try pressing the receiver button and while it is flashing turn the board over and press the small reset/connect button on the bottom of the board and also the reset/connect button on the bottom of the mouse. It should work okay after that. here is hoping that helps. Bud