Question about Cell Phones

1 Answer

5400 won't connect to blue tooth device

LG 5400 phone, plantronics 222 device. Pairs successfully, but when attempt to "turn on" phone keeps stating "device out of range, or powered off" Help!

Posted by on

  • 1 more comment 
  • Anonymous Jun 06, 2008

    Please describe the specifics of your problem below. We'll add
    your post as a comment to klhpac's 5400 won't connect to blue tooth device problem, and notify you when a new solution is offered.

  • Anonymous Jul 22, 2008

    I have an LG VX9100. My plantronics 222 was working fine till today the phone battery died while I was using the phone and headset. Now whenever I try to connect the headset I get a message saying the headset is out of range or turned off. I deleted the headset from the phone and re-paired it. Also, I have the headset paired with my computer and it still works fine there. Any ideas?

  • Gerald Straight Apr 28, 2009

    Voyager bluetooth will not connect or find anything. Used to work but now all of a sudden can't connect or pair with anything???? Anybody have any ideas?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 282 Answers

Change the bluetooth device.

Posted on May 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i try to pair with my galaxy tab s through bluetooth the tab goes through the process of connecting but doesnt pair however my galaxy s5 phone pairs immeditely ?


  • Your issue is that you can only connect one mobile or tab to a blue tooth.
  • It only accepts one device at a time.
  • You need to connect one to your blue tooth in your vehicle and try something like a blue tooth pill or blue tooth speaker.
  • I have had this problem with my Parrot car kit.
  • Hope this helps. Russell

Nov 22, 2015 | Cell Phones

Tip

How to connect a (Motorola) Blue Tooth headset to a mobile phone!


The following procedure is dependent to the phone in use! However it is mainly for Motorola brand but it works with many others too!
1. Turn on your mobile phones bluetooth function and go to search for new devices menu.
2. On the headset, From turned off state, Try holding down the power button for at least 5 seconds.
- The light should stay constantly on (or in other brands flashining very fast) which means the headset is in receiving/searching state!
3. search in your mobile phone for blue tooth devices(the phone and headset shouldn't be more than 5 meters away from each other )
4. When you find your blue tooth headset, chose it and hit "connect" or "pair" with the device!
5. you will be asked for a pin, put in "0000" and ok!

now your headset should be paired with your phone (the light flashes slowly) and will be ready to receive calls!

Best wishes
Bruce

on Jan 27, 2010 | Cell Phones

1 Answer

I need need pas key for plantronic 220 pairing to a blackberry 8300. jguyden@ccny.cuny.edu


Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

Sep 14, 2010 | Cell Phones

1 Answer

I WOULD LIKE TO SET UP A BLUE TOOTH CONNECTION


Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

Aug 20, 2010 | LG Shine CU720 Cellular Phone

1 Answer

What is the bluetooth passkey code for lg gt505 mobile phone to pair with other devices


HOW TOCONNECT BLUETOOTH






Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

Jul 02, 2010 | LG GT505 Cell Phone

1 Answer

Unable to pair LG GM200 bluetooth 2.0 A2DP with Plantronics Pulsar 260. Error: "Request Failed" Please help in connecting this two devices


Each pair of BT enabled phone and headset is a particular world. I don't have the Plantronics, but my LG phone pairs fine with my Lubix stereo headsets. I'll tell you how I managed to pair them: I put my headsets in pairing mode. Then, on my phone, I go to 'Connectivity > Bluetooth > Device list > Options > New'. If my bluetooth stack is off I'm prompted to turn it on. It starts to search for devices, and comes up with my BT headsets' name, I press 'Pair', it prompts me for the pairing code. I enter '0000' (the same code for your Plantronics' headsets, by the way) and Ok. Then, back to the Device list, I select the BT headsets and go to 'Options > Connect'. I'm good to go. After listening to music, I use to go again to 'Connectivity > Bluetooth > Device list', select the headsets and press 'Options > Disconnect'.
Hope it works for you.
Cheers! Carlos

Apr 18, 2010 | LG GM200 Cell Phone

1 Answer

HOW DO I CONNECT MY BLUETOOTH TO MY LG RUMOR PHNE


first thing make sure your blue tooth is fully charge and on. Then go into menu go to setting find blue tooth setting go in there make sure your phone is set on enable blue tooth then turn on searching then it should pull all the blue tooth signals that are around the phone then just select the bluetooth device

Nov 19, 2009 | LG RUMOR Cellular Phone

1 Answer

How do I connect my motorola bluetooh headset S9 to my LG Vu920?


When using your S9 for the first time, follow these
steps to pair (connect) to your Phone:
Important: If you are pairing separate Bluetooth
devices for handsfree calls and streaming music, it is
recommended that you pair your S9 with your
handsfree device (phone) first.
1 Ensure the Bluetooth feature is enabled (turned
on) in your phone.

2 Turn on your S9 by pressing and holding (|) button
until the indicator light flashes three times in
blue.
After a few moments, the indicator light will be
steadily lit in blue to indicate your S9 is in pairing
mode.
3 From your device, perform a Bluetooth device
discovery/search. .
When pairing your S9, use
the following steps to perform a device discovery
from your phone:
After accessing the Settings Menu, go to bluetooth.
to add a new device, tap [New].
1. Tap [New] key to search the device that can be connected and which is
within range.
The phone lists Bluetooth devices it
finds.
b Select Motorola S9.
c Select OK or Yes to pair your S9 with
your phone.
d Enter the passkey: 0000
e Select OK.

When your S9 successfully pairs and connects to
your device, the indicator light displays blue with
10 quick purple flashes. If wearing your S9, you
will also hear an audio tone indicating successful
pairing and connection to your device.
4 To verify your S9 has successfully established a
handsfree calling connection with your phone,
dial a phone number you want to call and press
the Send key on your phone.
When successfully connected, you hear ringing
on your S9. A Bluetooth Handsfree Phone (HFP)
connection is now established with your phone

Jul 13, 2009 | LG Vu CU920 Cellular Phone

1 Answer

Lg env v pairs with jawbone but won't connect. is it the code?


I have had the same issue with MY Samsung bluetooth headset.

Here's the sequence that works for me:

  1. Delete the headset under the bluetooth menu.
  2. Turn off the bluetooth
  3. turn on the blue tooth
  4. Add the headset back. The default pair code for most devices is "0000" or "1234"
  5. Try to enable/connect. If it fais, simply power off the enV.
  6. Power on and try to connect again (just connect, not pair)
  7. Headset will then pair.
KingGypsy in Phx.

Jan 19, 2009 | LG enV VX9900 Cellular Phone

1 Answer

Blue Tooth Connection for LG Shine


I have been having the same problem with my 720 trying to reconnect to a bluetooth. I have purchased a Plantronics 220 and also a Motorola one. My phone will connect one time, and shortly after my test call, it will disconnect on its own, and I cannot get it connected back. I thought it was the bluetooths messing up but actually it is my phone. I have contacted LG about this problem and they told me I would have to send my phone back so they can take a look at it. So you may want to call them and put in Another Complaint.

Jun 18, 2008 | Cell Phones

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...