Question about Panasonic CT-36HL42 36" TV

1 Answer

No power it mad a strane one second noise as i tried to turn it on then acts as if it has no power is there a fusable link to reset

Posted by on

  • Anonymous Jul 02, 2008

    won't turn on. is there a reset button or fuseable link?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

There is a 6 AMP 125 Volt fuse on the main power board. My CT-36HL42 would not power on so I replaced the fuse and it works.

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Top ~1¼" of the picture being overscanned into top ~½"


a missing power supply voltage, defective vertical output IC, or a component associated with it is likely bad. A bad connection or blown fusable resistor may be the cause of a missing power supply voltage

Thanks for using Fixya!
tc

Sep 19, 2008 | Philips Magnavox 20MT133S 20" TV

1 Answer

My Magnavox plasma screen tv, model number: 42MF237S/37 makes a clicking sound when I try to turn it on. No sounds, no picture, just the clicking noise. Things I have tried so far: 1) Turning the TV off...


You either have a cold solder joint in your horizontal deflection circuits or your or in your horizontal output circuit. please be careful due to the fly-back transformer still holds power even unplugged until you discharge it.( ground it out). Hope this helps.

Jan 03, 2010 | Philips Magnavox 27MS343S 27" TV

2 Answers

TV pops, then no picture or sound


Trintitron were very state of the art when they came out in the 1960s. The Sony company stopped production of the newer version, flat screen in 2008 of the trintitron. Popping noises aren't a good sign. You can try resetting it to factory default settings. Try to have the power on to tv, then, hold down the reset button on the REMOTE CONTROL- next on the tv PRESS THE POWER BUTTON ON=IF AND WHEN THE TV WILL TURN ITSELF OFF AND ON AGAIN, THEN YOU CAN RELEASE THE RESET BUTTON. Unless it This noise is caused by the expansion and contraction of the cabinet during warm up and cool down of the lamp in the optical block of the television. This is normal operation. But you having no picture, this could be your power circuit is going out. You can get it fixed, but if it is an older tv you may want to upgrade to an LCD, HD, or even a plasma. They have really nice flat screen HD TV now that are not too expensive. But if you are pleased with this tv it might be worth getting it fixed.

Aug 04, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Tv turns self off after about 20 - 30 seconds


check main pcb for bad solder also replace r422 1ohm fusable resistor part number 996500015672

Jan 09, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

Tv won't turn on or respond


the power supply is faulty, check the following for lekages
power transistor
rectifier diodes
fusable resistors
also griver transistors

Nov 25, 2008 | Toshiba 35A44 35" TV

1 Answer

Toshiba 35a44


your power supply is faulty check the following components
power transistor
rectifier diodes
zener diodes
fusable resistors
switch

Oct 02, 2008 | Toshiba 35A44 35" TV

1 Answer

Picture fails


hi,

sounds like a high voltage issue, it will have to go in, i dont recommend self servicing that. may sound strange but Ive seen several tvs go by way of spouse having a plant above or near the tv, that person watering it and a few hours later mad spouse sitting in front of a busted tv that sounded just like that. also I had a cat that sprayed one and it did that. just a couple ideas for ya.

J

Jul 12, 2008 | Philips Standard (CRT) Televisions

2 Answers

Proscan tv 36in


Many problems with this unit with the HV transformer (flyback) and also a regulator ic in the power supply. Sorry, nothing easy for this type of problem. You will need a tech to diag. and repair this problem.

Mar 01, 2008 | Proscan PS35660 TV

1 Answer

GE 31GT740 clicks off and on


Dead, led flashing red/green at first, then going to red standby
Replace C604 (1000uF, 16v) elec. cap. It is in the decoupling circuit for the 5 volt supply
Reverts to standby from switch on via TV or Video
No 5v rail because FET MTP3055 o/c. (BUZ71 will do nicely)
Goes straight to standby, after a quick burst of power
Replaced R952 (39K), had gone slightly high

Nov 23, 2007 | GE 31GT740 31" TV

Not finding what you are looking for?
Panasonic CT-36HL42 36" TV Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68427 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a Panasonic Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...