Question about Texas Instruments TI-84 Plus Calculator

1 Answer

Misinterpreting Program Types

Hello! No need to take this too seriously, as this is a problem I've been having with games... The majority of Mirage and Ion games that I have downloaded were not recognized by the MirageOS application. Doors CS 6 recognized these programs, but displayed them inaccurately as TI Basic programs, giving me Error 504 (Not Enough Mem) when I tried to run them. The only programs I've had success with are Ztris by Tijl Cootman, Asteroids by Joe Pumberton, Nightblade, and Megaman by Paul Marks. Any tips would be greatly appreciated!

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Many times it all as to do with how much memory you actually have. the more games the less memory, and if you use too much memeory on the actuall files it doesnt have enough to run games, to free up space either delete some files or archive them (archiving renders them unuseable untill u rearchive them) but archiving has alot more space

also some games are not compatible with mirage os or ti 84

hope this helped

Posted on May 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My air compressor is going in my 2001 Mitsubishi Mirage. Now the question is... Do I need to replace it if I dont mind not having A/C.. or... is it connected to the alternator or any other major thing in...

Well sweetheart, if you dont mind not having AC, it doesnt affect anything leaving it on there, as long as you have the AC turned off...No need to remove anything.

Aug 19, 2011 | 2000 Mitsubishi Mirage

1 Answer

Hello, i've installed the Dawnspire CD game and when i tried to launch it my computer said, "Launcher.exe - System Error -- The program can't start because MSVCR71.dll is missing from your...

Download MSVCR71.dll from (It is free.)
Place MSVCR71.dll into C:\Windows\System32

or C:\Windows\SysWOW64 if you using a 64-bit Windows.

Jun 02, 2011 | JoWood Productions Dawnspire (PC) for...

1 Answer

Windows 7 Blue screen at start up. Shows "Starting Windows" then memory dump/ blue screen. Recovery = No points created by the owner. Roll Back = Tried the 3 points for installs which all still...

Operating System does not respond is the major problem.
This is a very commonly faced error by the users of the Windows 7 which leads to the Blue Screen of death to the system. The error message appears on the computer screen in the following form: "Windows Operating System is not responding" along with two options one "Close the Program" and other "Wait for the program to respond". But whenever the user attempts to close the program he comes up with a serious data loss. To solve this problem apply different troubling shooting methods or take help of the technical experts.

Jan 12, 2011 | Toshiba Computers & Internet

1 Answer

How do i change a head gasket on a mitsubishi mirage

This if a big and very important job. It requires more than you can get here at You need many special tools not to mention a place to work. Do you have a garage you can work in for at least two weeks? You will probably have to get the heads worked on. Then there is the reassembly.

If you are serious about this, you need a motors manual for this make and model plus all the special tools and a strong helper.

Mar 06, 2010 | 1995 Mitsubishi Mirage

2 Answers

Have charged the battery on my 1999mitsubishi mirage

you may connecting it wrongly , please check +ve and-ve both pole are to be fix with proper wire, if will do wrong it will blow fuse.

Jan 31, 2010 | 1997 Mitsubishi Mirage

3 Answers

1999 Mitsubishi Mirage, how does one reset service reminder light

what does the light read??? I dont show a Maint required light for that model?

Sep 24, 2009 | 1999 Mitsubishi Mirage

1 Answer

I am triying to go to mirage island but this cheat movie tricked me so Im going to get the righ movie

To get to mirage island go to pacidlog and talk to an old man in the farthest hut right in the right corner, if he says he sees mirage island then you can find it, if he says he cnat you just wait until the next day.

Aug 30, 2009 | Nintendo Pokemon Emerald for Game Boy...

1 Answer

Protect program

If you can upload it to the computer, you can open it with prgm editers, and they should have a selection for protecting the prgm. The editer i used was TI-program editer, unfortunately, new windows updates made that program impossible to use on Windows XP and TI didn't update it or anything so yeah...I don't know about vista though, you can try that. Another way is to open the file through Mirage OS and 'lock' the program. To make basic prgms visible in mirage, simply put a : at the very first line. The problem with this method is that anyone with Mirage can unlock it and change it...

Mar 25, 2009 | Texas Instruments TI-84 Plus Silver...

1 Answer

Is there a way to play games and put in a password on a TI-83 plus?

Yes, there is. There is a program called mirage os and another one but i forgot the name. You should google it to find online. You need to have ti connect which you can get it off the ti website. Well mirage os can have a password by pressing alpha in it. Also in order to have a password to turn it on you would need to go to mirage and then press on and then it should turn off. To program you would need to know assembly or ti basic (they are basically the same language). To start programming he would need to press the prgm button and the options are reached by pressing the prgm button again.

Sep 10, 2008 | Texas Instruments TI-83 Plus Calculator

1 Answer

My calculator is working well but only one button isn't working ; Memory I press 2nd , then + (MEM). But it doesn't work. + button does work and 2nd key works with other button.

I KNOW exactly what is wrong i had the same problem. you put a program like mirage or another application o your program on your calculator. no kids don't want teachers to deleter their games so mirage has a memory blocker. go into mirage then hit alpha then go to like protection options and stuff and turn off memory block. GOOD LUCK

Dec 25, 2007 | Texas Instruments TI-83 Plus Calculator

Not finding what you are looking for?
Texas Instruments TI-84 Plus Calculator Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers

Stevan Milanovic

Level 2 Expert

265 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides