Question about Casio Exilim EX-Z40 Digital Camera

1 Answer

No image on monitor

Turn on camera -
Monitor shows date, time etc in words but display is black, no image appears. If you try to record a photo it is also black. Shutter is open.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Hello Jillnell,

This symptom may occur in cameras with an optical viewfinder. These cameras have a power save feature that turns OFF the display after about 2 seconds. Simply press the DISP button to cycle this mode OFF or ON.

If that doesn't help, then most likely it is a faulty CCD sensor. If it is under warranty, its best to get it replaced. You will have to get the camera serviced if it is not under warranty.

You can find details about authorized service centers and out of warranty repairs HERE.

Hope that helps, and thank you for using FixYa!

Irishdruid

Posted on May 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The monitor display is black, I want to view the shot I am taking with the monitor not the viewfinder.


Rotate the Live View switch located just above the circular multiselector.

Full details are in the "Live View" section of the manual (beginning on page 37 in my copy).

Sep 28, 2012 | Nikon D3100 Digital Camera

1 Answer

LCD Display is Black


the image in the LCD monitor will darken in strong sunlight or bright light. This is normal occurrrence in device CCDs and does not contitute a malfunction. This image will not be recoded when shooting still photos, but it will be recorded wihen shooting movies.Read you owner manual and adjust the MENU, according with your o. manual.Otherwise you must go the repair shop
God bless you
8_1_2012_6_43_07_am.jpg

Jul 31, 2012 | Canon Digital Cameras

1 Answer

Cannot get date to print on .jpeg images when downloaded


The date and time (and a lot more) are stored with every photo in its EXIF metadata. If you want the date printed on your photos then please refer to the documentation for whatever program you're using to print. Depending on the program and printer you may have the option of printing the date on the image, in the margins, or on the back.

Apr 19, 2012 | Konica Minolta DiMAGE G500 Digital Camera

1 Answer

Can't get date/time to not appear on screen or download to comp


Are you sure your canon battery pack is OK?If not ,replace it with a high quality replacement battery pack.

Jul 25, 2010 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

Canon EOS 450D Can only get the Shooting Setting Screen no image


In picture taking mode, press the "set" button for "live view".

Feb 27, 2010 | Canon EOS 450D Digital Camera

2 Answers

Displaying time and date when printing


The date/time cannot be deleted once it is embedded in the image. To turn off the date/time deselect the date/time stamping by following procedure:
These instructions explain how to insert the date in images.
attention:
  • The [Date Stamp] cannot be deleted from the image data once it has been recorded because the date is written in as an image.
  • When selecting [Date Stamp] , [Recording Pixels] is set to 1600 x 1200 pixels and the compression (image quality) to [Fine].
  • When the shooting mode is set to <Movie> (g0029623.gif), settings for inserting the date and time cannot be made.
  • The following explanations are provided based on the assumption that the [Shooting Mode] is set to <Program AE> (g0034813.gif).



1. Press the <Power> button on the camera.
g0046584.gif
2. Press the <FUNC./SET> (g0046915.gif) button.
g0046627.gif
3. A screen like the one below will appear on the monitor.
g0046619.gif
Select g0013174.gif [Date Stamp] (g0013171.gif) in the [Recording Pixels] section g0013173.gif.
g0013176.gif Press the <MENU> (g0046624.gif) button.


4. A screen like the one below will appear on the monitor.
g0046699.gif
g0013173.gif Operate the <directional buttons> left or right to select [Date Stamp] and set it to [Date] or [Date & Time].
g0013174.gif Press the <MENU> (g0046624.gif) button.


5. Press the <FUNC./SET> (g0046915.gif) button.
g0046628.gif
6. Make sure that the [Date Stamp] is set and the following screen will appear with the icon (g0013164.gif) in the lower-left corner of the screen.
g0046623.gif
7. When shooting with this setting, the date will be embedded in the image as shown below.
g0018302.gif
g0013173.gif [Date]
g0013174.gif [Date & Time]
warning: The date, its font and color, and the position where it is displayed cannot be changed. Also, dates and times recorded with [Date Stamp] cannot be deleted.


If you need a manual for the A480, you can download it from:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=18155

Please rate this solution. Thanks.

Oct 15, 2009 | Canon PowerShot A480 Digital Camera

1 Answer

Can not get dates to show up on photos


You can embed the date on image data when (Postcard) is selected. The date will be printed on your images even if it has not been set at the computer or printer.

* Ensure that the camera's date/time is set beforehand.
* Set the camera to a shooting mode (except (Stitch Assist) or Movie).
* Press the <DISPLAY> button so that icons show on the LCD screen.


1. Check that appears on the LCD monitor.
- If it does not, click here to view the procedure for changing the resolution.

2. Press the <MENU> button.

3. Select (Date Stamp) in the [ Rec.] menu using the or buttons.



4. Select [Off], [Date] or [Date & Time] using or .



5. Press the <MENU> button to exit the menu.

6. Shoot the image.
- The Date or Date & Time will be embedded into the actual image.

Jul 27, 2009 | Sony Cyber-shot DSC-S730 Digital Camera

1 Answer

Screen black in all lighting. Icons and menu show and can view photos already on card, but screen black in all modes. Can take picture, but it is also black. Lens cover is open. Nikon Coolpix 4600. Thanks...


Hello, I went and researched a few points in the manual and hope this helps to some extent. If this doesn't help, try resetting your camera by removing the batteries for 30 seconds, then reinstalling them and turning on the camera again.
Monitor is blank:
• Camera is off.
• Batteries are not correctly inserted or battery-chamber
cover is not properly latched.
• Batteries are exhausted.
• EH-62B AC adapter (available separately) is not properly
connected.
• Camera is in sleep mode. Press shutter-release button
halfway.
• Monitor is off.
• USB cable is connected.
• AV/Video cable is connected


No picture is taken when shutter release button is pressed:


• Camera is in playback mode.
• Batteries are exhausted.
• Red (!) lamp flickers: flash is charging.
• Green (AF) lamp flickers: camera unable to focus.
• Message "CARD IS NOT FORMATTED" appears in
monitor: memory card is not formatted for use in your
camera.
• Message "OUT OF MEMORY" appears in monitor:
insufficient memory to record picture at current Image
mode setting.

Dec 02, 2008 | Nikon Coolpix 4600 Digital Camera

1 Answer

Monitor is black w/ no image


This qualifies for the service advisory @ http://www.nikonusa.com/email_images/nikonusa/service_advisory/coolpix.html. I had the same problem and they repaired it free of cost. Send it to them today.. Good Luck...

Apr 04, 2007 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Casio Exilim EX-Z40 Digital Camera Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Digital Cameras Experts

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Fred Block
Fred Block

Level 2 Expert

289 Answers

Are you a Casio Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...