Question about Compaq Presario-Notebook 900 Series Video Boards- DQ044-69002 (DQ04469002)

1 Answer

S-Video port on my Compac Presario V5000 Laptop

Hello.
The S-Video port on my Compac Presario V5000 Laptop seems to have a problem. When I plug the s-video - to - audio/video cord into my s-video port, to plug into my TV, to watch video on the TV, (as a 2nd monitor) the screen is constantly rolling up and down quite fast. I tried new audio/video cords and a new s-video - to - audio/video cord. No change. It must be the s-video port itself. Has anyone had a similar problem, and if so what did you do to correct it? As you can imagine this is quite a pain.
Thank you all.

Posted by on

  • Anonymous Nov 17, 2008

    I have Compaq nx6320. I am also not able to use s-video port! It just does not do any thing. Tried restrating laptop a lot times also.

  • Anonymous Apr 22, 2009

    I have a HP laptop (same **** as compac) and the S-Video port died! it used to work fine, but now it doesn't do anything when i plug my TV. I guess the port has been disconnected somehow, cause it's not a software or configuration problem.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 458 Answers

Try installing manufacturers Drivers for your video card... You're probably using the "default" drivers.. Might fix it to get the current ..

Posted on Jun 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor won't stay on


how is the monitor connected to the computer? what connection type is the monitor is it VGA or HDMI . What format is the computer video output is it VGA or HDMI. Also you may have two video outputs on the computer. Sometimes the motherboard vga output is disabled so that a much better video plug in card can be used which has its own video output port.

Apr 16, 2013 | Acer America Acer Aspire AX1800-U9002...

3 Answers

My computer beeps but does not start


Those beeps are telling you what is wrong. Most times it's the memory or video card.

When you plug in the power cord is there any lights whatsoever on the laptop, where the plug goes in or on the AC Adapter of the power cord?

When you press the power button do you hear fans running, hard drive spinning, lights on the computer, hear any beeps or lights constantly blinking, hear the DvD/CD drive click and the light on the drawer of the DvD/CD turn on for a second or two? If so the laptop is trying to boot or may have booted, but the screen is not showing for some reason.

Beep tones and blinking lights tells the technicians what is going on with the laptop and why it is not booting. Most times it's a motherboard issue when you hear beeps or blinking lights continuous. Most times the problem is with the memory or Video Card. Count the Blinking Lights or Beeps and take note of their pattern (1 Long or 1 Long followed by 2 Short).

Maybe your power cord is bad if you don't get anything to happen whatsoever when you press the power button. And if that's true maybe you was operating off the battery the last time you had it on and since the power cord is bad, it was not charging the battery so the battery is drained and the power cord is bad.

Maybe you have a Static Charge Buildup. Remove the Power Cord, Remove the Battery, then Press and Hold the power button for 30 seconds. After 30 seconds plug the power cord back in (leave the battery out) and hit the power button to see if it boots. If it does, you can put the battery back in and let it charge.


Maybe your DC Power Jack which is where the power cord plugs into the computer is bad. Take an ink pen and push the tip inside the jack and see if the little pin wiggles, if so the jack is bad. You'll have to take the laptop apart to fix it. Most times it is soldered onto the motherboard, so you will have to desolder the old and solder a new one.


Maybe your memory is bad or the memory slot is bad.

Remove the Power Cord, Remove the Battery, Remove the cover that houses the memory on the bottom of the laptop then remove one of the memory chips. Set the chip aside then try rebooting the computer. If it boots, then you know the memory chip you set aside is bad so mark an x on it with an ink pen. If it fails to boot then move the chip to the next memory slot and try rebooting. If it fails take the chip out and set it aside, then put the other chip in and try booting it in both slots. If it boots, just to verify that the chip set aside is bad, mark an x on it and put it into the open memory chip slot and try booting.


Jun 03, 2012 | Acer SMS3000BOX2LB CPU for ASPIRE 3003,...

2 Answers

Laptop display went black after inserting a USB cable for iPod.


count the beeps on startup, and makes sure that you count if any are long beeps and short beeps as these are bootup error codes.

Mar 24, 2010 | Compaq (169174-002) - (Refurbished)...

1 Answer

Laptop failure


Boot into safe mode by pressing F8 about 10 times during the post screen. Then completely remove your video drivers. Then reboot, into windows normally, go to the Nvidia web site and download the latest graphics drivers for the video card that you have. If this does not solve your problem, then you may have bad video memory on your video card.

Nov 19, 2008 | Medion (40010998)

1 Answer

My display colors are fadded and shadowed I have switched monitors and same on both monitors?


Check you plug to see if one of the pins are bent over and also pull the video card and reseat in the computer sometime it only takes a little bump to make them move if it is not that then its the video card seeing that you already upgraded your software

Sep 24, 2008 | Compaq Pentium 4 , 1.5 GHz (244318-B21)...

1 Answer

Svideo for laptop


Yes, just post your model number to this forum and send it to my email to notify me that you are ready.innocent.asia@yahoo.com

Jun 08, 2008 | Compaq Presario-Notebook 900 Series Video...

1 Answer

Hooking my emachine monitor with compac tower


Jordman85,
Make sure that you are connecting to the video output on your Compaq that is configured (such as a PCI video card versus the integrated Graphics on your MoBo) and when reconnecting monitors, make sure the machine is powered down before connecting or disconnecting.
Since you say that "the only thing that show up is the arrow button", I assume you are referring to your cursor, and if that is correct? You're PC would be attempting to boot to windows and there may be a hardware conflict that may be stalling it. There could also be corruption in the windows installation. But the monitor should be simple "Plug and Play".
More details about your Graphics Card and any recent hardware software changes/occurrences that have taken place would help.
Good luck.

Mar 16, 2008 | Intel (RK80532PG0881M) Pentium 4, 3 GHz...

6 Answers

Sound driver


Hello Sir
I am format my system and i am lost my sound drivers and not much clearty of video.I dont no whats the model name i am sending the number of back CPU. P4533/1D3
3cpm015070

Dec 04, 2007 | Intel Pentium 4 505J Prescott 533MHz...

Not finding what you are looking for?

Open Questions:

See all Compaq Presario-Notebook 900 Series Video Boards- Questions

Computer Processors Logo

Related Topics:

922 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computer Processors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you a Compaq Computer Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...