Question about RCA HD52W66 Projection Television

1 Answer

By admpeek on Jun 25, 2008 When I turn it on the picture is concaved, the color is shifted slightly to one side, and there are 3 skinny lines across the top. I went to convergence menu and clicked it but all it did was turn the tv off then it came back on with no convergence option. Its a 2005 I bought it new.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 87 Answers

You have a blown fuse on the Deflection board FL231 it will be on the righthand side of the flyback Transfomer there are 3 of them in a row they will look like small brown retrangler caps, it will be the one in the middle. I had this problem myself just several months ago, replacing this fuse fixed the problem. That fuse controls the convergance of the 3 CRT's, without it the tv can't converge so you don't get the option in the menu.

Posted on May 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The picture on our Sony TV Model KP-43HT20 recently became distorted, concaving at top and bottom. If I use reset the Flash Focus, the picture will return to full screen side for awhile but the colors do...


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergene board have dead 2 STK convergence ICS and some or all of it resistors are dead too.These parts on the tv convergence board,must be replaced to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Jan 15, 2011 | Sony KP-43HT20 43" Rear Projection...

1 Answer

The picture and colors went out of focus.


Blowed Fuse there is 3 of them on the right hand side of the FBT flyback Transfomer they Look like small brown rectrangler caps But are Fuses .06amps
it will be the one in the Middle FL231
PartStore.com has them 1-866-925-7278

May 01, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

The colors are distorted and it seems like the only colors that really show are blue, green, and red. When you turn the TV on you can see blue, green, and red lines across the screen. The picture also...


Hi there, this is what we call in the industry convergence board failure. this board regulate the rgb and keeps everything in order so the picture looks nice and clean. when this board starts to malfunction, what you are witnessing is usually the result. I suggest repairing this convergence board. this will fix the 3-d effect.

Mar 08, 2009 | RCA HDLP50W151 50" Rear Projection HDTV

1 Answer

Rca p56927 colors out of line


This is a convergence oroblem. First question is do you have the convergence option in under setup in the customer main menu?... if you dont you may have the very common fl231 fuse problem; i have wrote a article on this under the tips and tricks section. this is a very simple inexpesive repair. If you do have the "convergence option" then you may have to replace one of three cuircit boards

Oct 25, 2008 | RCA R56WH76 Projection Television

1 Answer

My HD52W67 has concaved picture


This is a convergence problem and can be repaired relatively easily. If you can solder, you can fix this yourself. First try resoldering the pins on the convergence ICs. If that fails to resolve the problem, replace the ICs. These are large black ICs attached to a heat sink and should be marked STKxxx.

Keep us posted.
Dan

Jun 25, 2008 | RCA HD52W66 Projection Television

2 Answers

Almost fixed!


see my last post to you regarding the converegence resistors

Jun 15, 2008 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Red Blue and Green colors are not aligned and looks concave


replace fuse looks like cap next to flyback transfomer FL231 it will be the one in the middle.there are 3 of them next to FBT.

May 28, 2008 | RCA D52W19 52" Rear Projection Television

2 Answers

White horizontal, zig-zagging lines


Sounds like the flyback transformer is bad. couple of 100 dollars if it is that

Dec 03, 2007 | Televison & Video

3 Answers

Concave Images with pink and green colors


you can get it your tv fix the problem is in the IF amp and video circuit.a convergence will also be neeeded.the tv is old but can give you some more life call a tech they will be your tv doc.

Apr 03, 2007 | Sony KP-57HW40 57" Rear Projection...

Not finding what you are looking for?
RCA HD52W66 Projection Television Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...