I need to align my epson stylus c46 but i need to know what number it needs to ba at for on the alignment page

Unfortunately, no. This can be done by service centres within your area or if it's covered by the warranty then you can give Epson a ring

Hi
your printhead is clooged y ou need to replace it

Hi,

You can download the installation driver and software from manufacturer's site by clicking this link

• On the page which opens, select the operating system of your computer (Windows Xp/ Vista..) from the drop-down menu and download the required drivers and software.

Hope this solves your problem. Thanks for using FixYa.

If your printouts contain misaligned vertical lines, you may need to align the print head. Make sure the EPSON Stylus CX3200 is turned on and not printing, and the Error light is off. Load plain, letter-size paper in the sheet feeder. Press a Menu button until you see Head Alignment, then press the Color Copy button to print an alignment page. On the test page, select the pattern with the two vertical lines most precisely printed on top of each other. You may need to use a magnifying glass or loupe. Select one pattern each for rows 1, 2, and 3. (In this example, pattern 8 is the best in each row.) Press the + or - button to select the number of the best pattern for the first row, then press the Color Copy button. Repeat this step for the second and third rows. Note: If you select a pattern other than 8 in any row, that pattern becomes pattern #8 the next time you align the print head. When you’re finished, press the Stop button.

Hi, the information you need is here:

http://support.epson-europe.com/onlineguides/en/sc46/index.htm

Just click on the replacing ink cartridges on the left hand side, follow the instructions and pictures there.

hi,

goto here Epson Stylus C46

where you will be able to download all the software you need plus manuals etc.

riz.

It looks like jlfming has lost interest in this problem, so I think we may say it is "solved by poster"

This is a very late response to your query, but you did have it in the C46 section. It sounds like you have blocked heads but there could be other reasons such as a faulty print head or main board. If you still require help with this problem, please post a new comment to this effect.

connect to PC through usb, plug it on, if OS is WIN 98 install the software manually, if XP it'll install automatically. print a test page, calibrate ant enjoy....................

Check to make sure the paper alignment tool is up against the papers edge (snug), and verify no foreign objects in the feeder.