Question about Philips Magnavox 15MF400T 15 in. LCD Television

2 Answers

Screen says attention no signal

Green light stays on only briefly. Says "attention no signal" then goes black and amber light comes on.

Posted by on

  • Anonymous Jun 29, 2008

    Yes have the same problem, breifly comes up 'Attention No Signal' then disapears. What does it mean?

  • Anonymous Jul 28, 2008

    help

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Your TV is probably on the PC mode and you are not using it as a PC monitor.

You need to change the source by pressing the TV/Video button on the remote control or the SOURCE button on the TV itself. You may also just press the channel up or down buttons. Do this before the TV goes to standby mode (amber light) or while it shows the message: ATTENTION NO SIGNAL.

If it does not work, reboot the TV first and do this again.

Posted on May 18, 2008

Ad

I had the same problem. I went to the Magnavox website which suggested it could be caused by a problem with the power supply. I checked and found that my power cord was coming apart in the middle. I pushed it back together and fixed the problem.

Posted on Jul 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The monitor will not turn on. When power button


First--was it working?
Did it suddenly stop?
When you see the LG logo, then it goes away, does the power light turn from green to amber? Sounds like that doesn't happen.
So--if you are getting a signal, you should see something.
If there is no signal, then the power light should change from green to orange.
With no lights at all, I suspect a faulty monitor.

Feb 22, 2010 | Computers & Internet

1 Answer

Monitor comes on, I can see everything perfect then goes black


"Most" newer monitors will let you know if the are no longer receiving a signal. Sounds like the backlight is burnt out. Try getting a bright (LED works best) flashlight and shining it at the screen at all angles to see if you can see any of what you were doing. If the backlight is on the fritz, either return it on warranty or buy a new one.

Jan 31, 2009 | Westinghouse L2046NV Monitor

1 Answer

Monitor in sleep mode


I think it maybe time to buy a new monitor

Aug 09, 2017 | X2Gen MG15VT 15" LCD Monitor

1 Answer

Hp 2200d laserjet


possiably bad gear assembly.

Sep 21, 2008 | HP LaserJet 2200D Printer

1 Answer

MY SONY LAPTOP WONT BOOT


Hi,

The flashing amber light means the screen is in power save mode. Since you are not seeing a "No Video Signal" things are looking up.

You want to use the menu buttons on your screen to navigate through and locate the power save time out settings. Its best to set it for 'never'.

If that makes the change a fix, let me know, I'll guide you through the settings on your desktop display to control the display time out.

Regards,
Worldvet

Jul 24, 2008 | Computers & Internet

1 Answer

No Signal


You have to use the FN key and F5 to change between the LCD screen and the external monitor. It may be F8 also, depending on the laptop model.

Look on the F keys for a little picture of a monitor.

Once you have found it, hold the FN key and tap the F key and it should switch to the external monitor.

Jan 18, 2008 | Liquid Video E15LCD1 15"

3 Answers

Black screen on start up


yep

unplug the system
open the case
look for a battery and take it out
take out the memory (rams)
wait ten minutes
press power button 5 times
put everything back in

and boot it

Jan 12, 2008 | Dell OptiPlex GX270 PC Desktop

2 Answers

Flashes on then goes black


The green light only lets you know there is a valid video signal reaching the monitor. If the green light was not "on" your problems would possibly be within the pc itself. Something is not holding the circuit for the backlight "on" thus going black. Suggestions are: 1. Take it to get it repaired (if not under warranty) Hyundai carries a 3 yr warranty on this monitor. Website provided. 2. Buy a new monitor http://www.hyundaiq.com/Eng/Customer/CusSvc/Csvc.asp

Aug 27, 2007 | Hyundai L91A 19" LCD Monitor

Not finding what you are looking for?
Philips Magnavox 15MF400T 15 in. LCD Television Logo

1,164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...