Question about NEC Lands Phones

Open Question

Hi May I have the manual of NEC PABX phobne model ip2ap-6txd pls? I need to know how to forward my line from this model of phone to one of it's extension line please.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 47 Answers

SOURCE: NEC phone system - Forwarding incoming call gets busy signal

please call the engineer from which you have purchased the EPBAX system to congiure the same. It happens if something is wrong in line card at the exchange or the extentions are not configured properly with the Key Telephone System.

Posted on Apr 18, 2008

Ad
shaggyrat
  • 1224 Answers

SOURCE: I have a NEC NDK

Each PABX or telephone system needs its own driver as each system has its own output format for the SMDR port. Therefore the MonTel system must have a suitable driver (technically a receiver) for each type of PABX that it can support.

http://www.netwiz.com.au/appnotes/1872.htm

Posted on May 10, 2008

  • 7 Answers

SOURCE: call forwarding nec elite

Usually there are codes for call forwarding and forwarding cancel. I always program up *8 for call forward and #8 for call forward cancel. On your phone try a few numbers. First try *1 make sure you are on a phone with a display. Read the display and see what it says. If it is not what you need hangup. Then try the next number *2. Remember the #_ is usually the cancel.
Good Luck
Jerry

Posted on Nov 28, 2008

cnavarro
  • 2460 Answers

SOURCE: programming extensions in the phone

If you have manual(z), they should. One, the OM (operating manual) will tell you how to set up your personal programming.

The buttons on the left side of a 7730 have lights, the buttons on the right do not, so they are programmed differently. Left side is DSS, right side is PF (personal feature). If you have spare left side buttons, press PROGRAM the button and dial 1 plus the ext number and STORE. The light will now follow the activity of the extension you programmed.

The buttons on the right have no lights, so you can only put in extension speed dial numbers. For that, press PROGRAM, the button, and dial the 3 digit extension number and STORE.

Depending on the system your phone is connected with, you can just press the button to dial, or you have to pick up the handset or SP-PHONE and select intercom (if not selected) and it will dial that extension, or if the system is a TAW, TD or higher, just press the button.

Carl

Posted on Dec 08, 2009

  • 8 Answers

SOURCE: how to trfr call..??bcoz my NEC IP2AP 924m ksu cannot trfr

To transfer a call, do not press hold, but press Transfer. You will hear a studdered dial tone. Dial the number to which you are transferring. When you hang up, the call is transferred.

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to assign trunk lines on NEC SL1000 Keyphone System?


Try posting here:
http://www.tek-tips.com/threadminder.cfm?pid=937&page=1

Dec 07, 2012 | NEC PABX SL1000

1 Answer

Im using nec ip2ap-12txd tel2(wh), my dnd feature is on and it shows FWD RNA-> EXT 213 but i want to cancell it, plz help me


we are using nec ip2ap-12txd tel2(wh), incoming voice is very low can u suggest how to increase the volume

Sep 13, 2011 | NEC Electra Elite DTU 16D-2 Corded Phone

1 Answer

Pls help to solve my problem NEC telephone IP2Ap-6TXD I set to DND external, how can i deactivate it please..


Pls help to solve my problem NEC telephone IP2Ap-6TXD I set to DND external, how can i deactivate it please..

Feb 01, 2011 | NEC Dterm DTP-2DT-1 Phone

2 Answers

How to trfr call..??bcoz my NEC IP2AP 924m ksu cannot trfr


To transfer a call, do not press hold, but press Transfer. You will hear a studdered dial tone. Dial the number to which you are transferring. When you hang up, the call is transferred.

Apr 09, 2010 | NEC Dterm DTP-2DT-1 Phone

4 Answers

NEC Topaz Office Phone - How to program phone to call forward off premise


i need to fix the date and time in our telephone NEC Topaz IP2AP-6TXD Tel (WH)

Sep 01, 2008 | Lands Phones

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Brian LaDuca

Level 2 Expert

149 Answers

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...