Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

My Maytag Neptune FAV6800AW top load washer only runs for the first few minutes of the cycle, it will not spin..it just stops..we've tried two cycles, the quick wash...it starts at 33 mins and then stops when it reaches 28 mins...we then clicked off the cycle. The door will not open electronically...when we press a different cycle, such as the wrinkle control, it only runs from 55 to 48 mins and then stops...there a slight noise that never used to be heard when it washes the clothes and the washer stops and becomes silent....I'm not sure what's wrong with it...is there any way to reset the electronics or is this a mechanical problem...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 526 Answers

I'm and owner and will try to help. Are you handy and do you want to try a DIY fix?

From the wash times is sounds like the washer is agitating the wash load (tumblers are rotating the wash basket load) is that correct?

If so see if the machine will complete a Spin Only cycle with no clothes in the wash basket. Set the Spin setting to Spin/Hang dry seting and start the cycle. It should take about 10 min complete. Does the Spin Only cycle complete with no clothes in the wash basket?

Some handy links if you are going to DIY.........Service Manual for reference.

Posted on Sep 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Maytag Neptune FAV6800AW top load washer will not go into the spin cycle with clothes in it. It stops at 12 minutes and then we get a DC error code. When you take the clothes out, it finishes up the...


if it spins when you remove the wieght out of the tub i'd change the belt and if that's not the problem the tranny is bad but try the belt first,most likely that's what it will be,stop overloading the washer the part number for the belt is 25001054 and it's around 15 bucks

Oct 22, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag Neptune TL stops spinning mid cycle? The washer stops with 11 to 13 minutes from the end of the wash cycle and leaves water in the wash tub. We've tried shifting the load for balance but it does not...


RF_Tim
I feel you have a Clutch malfunction a very common problem with the machine. If you want to DIY the fix see my Clutch Fix post.

FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for reference.


If you need some additional help just shout back……..Rich

Jun 30, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Neptune FAV6800AW Top Load Washer: My Neptune washer is showing error code dc..Once i...


See this post Clutch Fix if you want to DIY I will help you.
Post back if you have questions……..Rich

May 18, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Neptune FAV6800AW Top Load Washer: my washer is stopping and not spinning with about ...


See if my Clutch Fix post will get you started if your machine model type is a FAV6800A or FAV9800A……Rich

May 18, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

The washer wont drain and finish a cycle


Is the wash tub banging aroun in Spin Cycle and failing with a unbalance code of dC or uC?

What is the model number?

May 16, 2010 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Maytag neptune FAV6800AWW top load washer gets to 32 minutes left and goes no further. It starts to cycle for about 5 seconds and stops for about 35 seconds... over and over and over


Is the machine in Spin Cycle when this is happening? What part of the washer selected cycle does the Cycle Status LED say the machine cycle is in.
If it’s in the Spin Cycle I think you have a clutch issue. Do you take any error codes to the LED console display such as dC or uC?
If you stop the machine in that cycle and do a Spin Only cycle will it complete?
Do you want to DIY the fix? Let me know and I will try to help…..Rich

Feb 26, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Will not spin when clothes are in the washer


Hope this is not a double reply, I'm having problems with this board. You have the symptoms of a Clutch issue if the machine type is a FAV6800AW or FAV9800AW. If that is your machine type please see this Post if you want to DIY the fix or share with a repair person. Post back if you have questions

Aug 31, 2009 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...