Question about Vacuums

1 Answer

Brushes do not rotate

Brushes will not rotate on a hoover f7425-900 steamvac. the filter is clean

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds as though your drive belt has come off. Or you have an object stopping the brushes from rotating.

Posted on May 18, 2008

1 Suggested Answer

  • 1894 Answers

SOURCE: On hoover steamvac F7425-900 brushes

check ur motors..
may be the supply or coils or supply is bad

Posted on May 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hoover steam vac model f7425-900 filter is


The brush system on this model has a poor engineering design in that the brushes are running off an air turbine, which uses a steel bushing to spin the turbine which gets rusty from the moisture when the machine is being used. No long term solver. I would replace the machine with a Dirt Devil Platinum Force model

Nov 27, 2009 | Hoover F7425-900 SteamVac V2 Widepath...

2 Answers

On hoover steamvac F7425-900 brushes do not rotate. I have cleaned the filter


check ur motors..
may be the supply or coils or supply is bad

May 15, 2008 | Hoover Vacuums

1 Answer

The brushes stopped turning. I cleaned the filter


Can you rotate the brushes manually (grab some of the yellow bristles and rotate the brushes). If they are not jammed, then your air fan drive is clogged or broken. Air must pass through the fan to spin the brushes... so confirm air flow by powering the machine on and feeling for decent air flow. Clear any obstructions that my restrict air flow....

Nov 24, 2009 | Hoover F7425-900 SteamVac V2 Widepath...

1 Answer

The brushes do not rotate when cleaning carpet. Is in carpet clean mode and will not rotate. I did clear the filter underneath.


(1) Assure the Brush Control on the hood is NOT set to the OFF position.
(2) Remove the brush assembly by pulling/unlatching it from base on each side.
(3)Does one of the brushes have the drive pin present? It should be about ¼ inch square, and two inches long. It attaches the brushes to the drive mechanism

Oct 22, 2009 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

How do you change the belt on a f7441-980 hoover carpet cleaner


There are no belts on the SteamVac series. If you have a brush rotation problem, please check this:
(1) Assure the Brush Control on the hood is NOT set to the OFF position.
(2) Remove the brush assembly by pulling/unlatching it from base on each side.
(3) Does one of the brushes have the drive pin present? It should be about ¼ inch square, and two inches long. It attaches the brushes to the drive mechanism.
(4)Remove and clean the intake filter. One the base of the cleaner, behind the brushes, squeeze the two red abs together and pull the panel down to access the screen. Clean the hair/debris off the screen

Oct 06, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

I have a Hoover SteamVac SpinScrub. The brushes


If the speed control switch on the hood is in the On position, it would appear the drive mechanism for the brushes is not spinning internally. The drive mechanism could easily be replaced by a technician.

Oct 03, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Why did the brushes stop rotating?


Please check two things:
(1) The shutoff switch on the hood is NOT set to OFF for brush speed.
(2) Remove the red filter panel from under the cleaner, behind the brushes, and clean the hair/debris from the screen filter. Squeeze the two panels together, and pull down to remove from the pocket.

Sep 29, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Brushes wont rotate


the belt has streached go to walmart and get a new one.

Aug 13, 2009 | Hoover SteamVac Carpet/Upholstery Deep...

2 Answers

Agitator brushes wont turn even after cleaning


the brushes will not turn even wen the switch is turned on

Aug 10, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Hoover steam vac model 7210-900


Did you clean both filters? There is one on the tank and the other is from the bottom, it ha a red frame, pull it out to clean. Pull the brush block out, is the shaft that goes up into the machine broken off? If so replace the brush block. While it is out, trn the machine on and see if the square hole up where the brush block goes, is turning. If not then the turbine has gone bad. You can sometimes clean the turbine out, otherwise replacing it may be the best option.

May 18, 2008 | Hoover SteamVac Carpet/Upholstery Deep...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...