Question about Nakamichi AV-2 Receiver

Open Question

Nakamichi av-1 receiver

Have to turn the volume all the way up to hear the speakers. Never had to turn above more than 2 or 3 dots to hear well. Any suggestions

Posted by on

  • naka000 May 18, 2008

    i had the same problem yesterday. I pressed something on the remote and now I have to turn the sound way up to hear any music but barely..what should i do?

  • coy55boy Dec 03, 2008

    I have the same problem on my RE-1 but only on the left channel.

×

3 Suggested Answers

SOURCE: Nakamichi TA-4A receiver no sound

HAI,AMP WORKS FINE , CONNACT ANY OTHER TO AMP(CD,DVD,COMPUTER,MOBILE,TV) IN BACKSIDE INAUDIO OR PRE_AMP .THEN SELECT  PLAYER TO IN MODE YOU HAVE INSAERTED.THE SOUND IS OK

Posted on Jun 26, 2008

  • 1 Answer

SOURCE: Lost Manual Nakamichi AV-10

I have the manuel, how much of it do you want scanned and emailed??
And can you tell me where in Canada to get and AV-10 repaired and is it worth it??

Slaylips

Posted on Dec 14, 2008

  • 1 Answer

SOURCE: looking for manual for nakamichi av-1

i want to know about correct watts details for nakamirchi av1

Posted on Apr 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a Manual for this receiver. I can only find a Brochure online. Trying to hook up a pair of speakers to the rear channels - but getting no sound. Any Help? Thanks!


Click on this link. This link will give you many choices to get your manual. Good luck. http://snmputils.com/booksearch/nakamichi-re-2-user-guide.pdf

Jun 30, 2015 | Nakamichi Audio & Video Receivers

1 Answer

No audio from Nakamichi av-10 receiver. Checked all connections and speaker buttons. Even headphones don't provide any audio


There is a protection circuit in that unit. It has a relay that is either dirty or has detected a fault that might or might not be there.

Sep 16, 2013 | Nakamichi AV-10 Receiver

2 Answers

The receiver is muted when playing in tuner or cd the volume is not coming through the speakers. We can hear it muted when turning up to max its very low. Lost instruction manual can you help. I think my...


I can't find a manual either. Can I assume you really mean the sound is muted for EVERY source, not just tuner and CD?

I'd guess it's either MUTED or a Tape Monitor is active. Turn the volume down, select FM as the source, tune a station and use it as your test source. Look around for indicators that give a clue.

NEVER troubleshoot anything with the volume control turned way up. You'll blow up or damage the speakers and your hearing right after you discover and correct the misplaced control.

Aug 15, 2010 | Nakamichi AV-2 Receiver

1 Answer

My Nakamichi av7 has no output to the speakers. it has not been used for a year but was fine when last used. is it a sticky relay?


This could be a number of things and withouit taking measurements internally, there is no way to be sure. Some possibilities include:
1) defective capacitors in the power supply.
2) shorted outputs
3) Open power transformer (either the standby transformer or main one)

To attempt to narrow down the possibilities, listen carefully when yyou attempt to power it on. Do you hear a click? Are there any lights on the unit at all? If the standby circuit is OK, you should see the standby light on.

Please update this with any additional details you can and we'll continue from there.

Thanks,
Dan

Feb 03, 2010 | Nakamichi AV-7 Receiver

1 Answer

Nakamichi AV10. Re: left channel softer than the right one.


Hi,\

Its an issue with the tone switch activate and reactivate it to get back to normal volume on both speakers, and would suggest you to clean the switch with WD40 and it should resolve the issue

Jul 16, 2009 | Nakamichi AV-10 Receiver

1 Answer

Nakamichi AV-7 5.1


in this case the centre speakers are the main route to the sound. 5.1 is for movies, where the centre speaer takes predcedence.

Aug 29, 2008 | Nakamichi AV-7 Receiver

1 Answer

Nakamichi AV-7 (issue with surround mode - prologic)


Nice Receiver!
>In your surround sound settings make sure the levels are set correctly and the distance from your listing point to the furtherest
speakers are set to accommodate the levels etc.
>How many speakers 5.1, 6.1, or 7.1 (1meaning subwoofer)
>Pro-Logic supports 5.1 but not sure about 6 or 7
>Pro-Logic II does support all
>Make sure you are hear the sound from all sometimes the sound is really faint if you are in surround mode

Thank You and good luck

Aug 28, 2008 | Nakamichi AV-7 Receiver

1 Answer

Nakamichi TA-4A receiver no sound


HAI,AMP WORKS FINE , CONNACT ANY OTHER TO AMP(CD,DVD,COMPUTER,MOBILE,TV) IN BACKSIDE INAUDIO OR PRE_AMP .THEN SELECT  PLAYER TO IN MODE YOU HAVE INSAERTED.THE SOUND IS OK

Jun 26, 2008 | Nakamichi AV-10 Receiver

2 Answers

Nakamichi AV-10 very little sound on the center speaker


could be the speaker, try connecting another speaker and cable and see if it improves. If the problem is still there and you've checked all the settings insuring that its not turned down, then could be an internal problem with the receiver.
Hope this helps a little at least.

Mar 30, 2008 | Nakamichi AV-10 Receiver

1 Answer

Nakamichi receiver av-2


jumpers must be in main in pre out

Apr 21, 2007 | Nakamichi AV-2 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nakamichi Audio & Video Receivers Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Brad Brown

Level 3 Expert

13536 Answers

Are you a Nakamichi Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...