Question about Frigidaire 27 in. Electric Gallery Pro Series Self-Cleaning Double Wall Oven

1 Answer

Gass Oven will not light...When I turn on the oven (200 degrees or on Briol) I see the ignitor glowing red and I can smell gas but it will not light. Model FG8504CHSA

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 473 Answers

Chances are the ignitor is weak and needs to be replaced. When they get weak the resistance is not proper to open the gas valve.

Posted on Sep 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire gas oven not heating. The broiler and burners work but the lower burner will not ignite. I replaced the igniter however that did not fix the problem. In fact, the new igniter does not glow. I...


Check for volts to the new ignitor. The ignitor draws current which opens the gas valve. If it is not glowing it is not drawing power. Test the ignitor,disconnected, with an ohm meter, it should be under 200 ohms.

Dec 28, 2013 | Ovens

1 Answer

I have a GE True Temp XL44 oven the stove burners work fine but the oven will not light. When I turn it on the oven, I do not smell any gas. What is the problem and how do I fix it?


could be a problem with the ignitor. take the racks out of the oven. remove bottom panel in oven. remove metal plate covering the flame spreader. the ignitor should now be visible. turn the oven on. the ignitor should begin to glow. if it doesn't glow bright white, or bright glow, ignitor is bad and needs to be changed.

Feb 13, 2011 | GE Ovens

1 Answer

SET DIGITAL THERMOSTAT TO SAY 350 DEGREES WILL NOT TURN ON OVEN,,, ? IF I SET TO BROIL BROIL WORKS BUT OVEN WILL NOT TURN ON ?


Possibly the ignitor for the main oven burner has failed--

An observation question:

When the Broiler 'lights' and comes on, do you notice the ignitor glowing bright, before the gas valve (to the Broiler) opens, and you get the Broiler lighting---

Now-- for the main burner to come on, -- there has to be a similar bright glow from the MAIN BURNER ignitor, before its main burner gas valve can open-- No Ignitor?-- No ignition, and not Main Oven burner!

Let me know what you need from this point on --

Mack B

Dec 30, 2010 | Maytag CWG3100A Gas Single Oven

1 Answer

Oven ignitor glows bright red, but oven will not light. No smell of gas.


our ignitor glowed but still was not working right. it has to get to a certain temp before the gas valve will open. try changing it out. fairly inexpensive.

Jun 19, 2010 | Magic Chef 9122 Gas Single Oven

1 Answer

When you turn on the oven the egniter glows, but it may take several minutes for the thing to light. sometimes you smell gas and sometimes not.


This is usually a sign that the ignitor is wearing out. Even though it glows, it is pulling just barely enough current to cause the gas valve to open. A new ignitor should take care of the problem.
Best Regards,
Bruce
www.fixyourboard.com

Jun 19, 2010 | Kenmore 33464 / 33465 / 33469 Gas Single...

1 Answer

The oven wont light. Panel light comes on and


Attach a amp meter to the ignitor wire. If you read 3 amps or less,replace the ignitor. 3 amps or more replace the gas valve.

Sep 06, 2009 | Ovens

1 Answer

Gas stove the burners are working but the oven is


Hi, The ignitor in the oven does not spark. It glows and has to pull enough amps to open the safety gas valve. The most common issue with these ovens is the ignitor. It can glow red but not be strong enough to open the valve. Remove the bottom panel in the oven and you can see the ignitor.
I hope this helps you. Please let me know if I can assist you further.

Vic

Jul 02, 2009 | Ovens

2 Answers

Magic chef oven/stove top range not staying hot


Hi, It very well could be the ignitor. Sometimes they work at first and then will not open the gas valve later in cycle. You can set the oven to heat and watch the ignitor. If it glows and the gas will not ignite in 30 to 45 seconds, the igniter is getting weak. I jope this helps.
Please let me know if I can assit you further.

Vic

Jun 20, 2009 | GE JGRP17 Gas Single Oven

1 Answer

Oven will not work - Hi/Lo broiler works fine


you have a bad bake ignitor. it is mounted to the long tube in the very back wall of the tube. usually held on by 2 1/4 inch bolts. usually if you replace the ignitor you have to cut the old one off and hard wire the new one in depending on what the new connection on you ignitor look like.

Jan 26, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

Not finding what you are looking for?
Frigidaire 27 in. Electric Gallery Pro Series Self-Cleaning Double Wall Oven Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

ashburton

Level 3 Expert

417 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...