Question about Hoover Floormate H3000 Upright Wet/Dry Vacuum

1 Answer

I just bought a hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the brissles at all. Help please. It is brand new. any ideas???

Posted by on

  • Anonymous Jul 14, 2008

    I just got A Hoover Floormate & it won't **** up water!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 310 Answers

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=40471&thid=603805
I just bought a Hoover
Posted by serdmann4 on May 17, 2008
I just bought a Hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the bristles at all. Help please. It is brand new. Any ideas???

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Hoover Floormate H3000 Upright Wet/Dry Vacuum. You can down load the owner manual from the Hoover website www.hoover.com . It looks like the one of the holding or recovery tanks my not be in place, leaking, cracked or damaged, or the clear tube is leaking and needs replacing. I looked 2 the owner’s manual and it does not show the clear tube but the vacuum does come apart and just back track the clear tube and mark the screws when you disassemble the unit. Other wise , please call the factory or a local Hoover warranty station in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on May 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I Replace reservoir and tubing assembly on a hoover floor mate?


Hello, this is Ava with Think Crucial.

You may check the online manual for Hoover Floormate in this link: Hoover FloorMATE Hard Floor Cleaner Owner Manual Also, you may call Hoover for assistance which is 800-944-9200

You can order replacement filters for your Hoover Floormate directly to us. You can check the filters in this link: http://www.thinkcrucial.com/search?type=product&q=hoover+floormate

As a special offer here is an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Oct 13, 2016 | Hoover Vacuums

2 Answers

Hoover floor mate h3000 will not suction water from floor when cleaning


Your collection canister may not be positioned tight enough in its place ment site. Tip machine back using foot pedal (as if you were going tio start using machine to clean) Insert collection canister (bottom container, then insert top canister with solution. The two canisters must be flush with machine side seams and must sit in position tightly. This is sometimes very tricky and may take a little elbow grease to make it click into place. Hope this helps

Jul 08, 2015 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

I have a hoover floor mate hard floor cleaner and the brushes won't spin


Hi, it's Jeremy from Crucial Vacuum.

In the link below you will find the user manual for your Hoover Floor Mate vacuum:
http://hoover.com/file/597/

Here are a few repair tips to make fixing your vacuum easy. Your Hoover brush-roll is connected to the motor by two different sized geared belts. Over time, the belt's gears wear down and stretch out losing the grooves and tension that turn the roller. When this happens you will simply have to attach a new set of belts. Another reason why your brush is not spinning could be that there is debris stuck in the roller and/or bearings. You can either use a can of compressed air to remove the debris or simply remove it with your hand.

You can purchase direct your replacement Hoover Floor Mate parts from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

http://www.crucialvacuum.com/catalogsearch/result/index/?manufacturer=37&q=floor+mate

I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Jeremy Lerner
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Aug 06, 2014 | Vacuums

1 Answer

My floor mate won't dispense liquid onto the floor


make sure the solution tank is on properly this link is for the manual
http://hoover.com/file/683/

Aug 04, 2012 | Hoover H3010 Upright Wet/Dry Vacuum

1 Answer

How can I get a Manual for the Hoover H3000 Floor Mate Hard Floor Cleanere?


You can download it in a PDF form directly from the manufacturer's website:
http://www.hoover.com/pdfs/manuals/H3000.pdf
You will require Adobe Reader in order to view the PDF document. If you do not have Adobe Reader, you can download it for free from Adobe's website:
http://get.adobe.com/reader/

Apr 02, 2011 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Unable to find recomended cleaner for floor mate, what can I use


Do NOT use ammonia...it will destroy the seals. #1 NEVER leave solution in the tank...and clean everything after every use. Lowe's and/or Home Depot have Bissels cleaner for the Hoover Floormate...also check Target and Walmart's sweeper dept. If ALL fails, you may use Zep Pine Cleaner (Home Depot) in a diluted 2oz. to 1qt. water...filling ONLY the little reservoir with this dilution!!!!! Good Luck.

Dec 28, 2009 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Hoover steam cleaner wont pickup water


in the front on top the cover that curves down to the floor is where the suction is .it should be plastic you can see into.its probably clogged with hair and dirt.you need tro take that top off and it comes apart in two sections .the middle seperates from the outer part.once apart you can clean it with soap and water.after you get that off you will see on your left side a long square port that needs to be cleaned also.please leave feedback.i hope i was of some help to.pete

Apr 30, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Floor mate


There is a little post in the back where you insert the top solution/water tank, if you put the tank in incorrectly, (i.e., shoved it in, instead of putting it in at an angle, bottom first) there is a chance you broke it or bent it backwards. My mother broke mine, i've got the post but don't know the part, without that post inserted into the tank the water will not come out.

Nov 06, 2008 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

I used my Hoover FloorMate, SpinScrub Hard Floor Cleaner for the first time today. My intent was to clean the grout in my kitchen/family room floor. Since the water was dirty I know it cleaned the grout...


The Hoover model 800 has seperate brush assembly to do grout. The 500 model (yours) has only the one hight brushes so other means must be taken to do grout. I have a 500 and all tile floors and I'm bumbed too.

Kirk Thompson
San Juan,PR

Aug 14, 2008 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

I have a hoover floor mate(the hard floor cleaner). The plastic solution cannister leaks through a spring plunger.


There is a rubber bushing that should be in there also. But replacing your tank may be the best option.

May 12, 2008 | Vacuums

Not finding what you are looking for?
Hoover Floormate H3000 Upright Wet/Dry Vacuum Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...